1. Top 11 Questions to Verify Experience and Credentials As General manager in manufacturing:
Sometimes people want a job a little too bad - and they may fudge their credentials and experience a bit.
If you've run into this problem, are worried about it, or have credentials and experience that are absolutely essential, you may need to ask a few verification questions.
If you are a candidate, you should review your resume and make sure you know all the key points, and that nothing has been misconstrued.
1. What grades did you get in college?
2. What were your responsibilities when you worked in job x?
3. How many people were on your team at your last job?
4. What will your previous manager/supervisor say when I ask where you needed to improve?
5. What was your beginning and ending salary at job x?
6. What were your beginning and ending titles at job x?
7. Are you eligible for rehire at job x?
8. What tools are necessary for performing job x?
9. Describe to me how you would perform [x typical job task].
10. What was the focus of your thesis?
11. When did you leave company x?
2. How do you believe you would benefit our organization?
This is a great question that provides you the opportunity to put your best foot forward, to tell the interviewer why he or she should consider hiring you for the job. Make sure you're well prepared for this question as you won't likely get a second chance to really shine.
3. Why do you want to work for this company?
Again be honest. The interviewer will be able to sense very quickly if you're be disingenuous. Your answer should be base on your person reasons, career aspirations as well as research you've performed on the company. The most important thing you should do is make sure to relate your answer to your long-term career goals.
4. What type of people do you not work well with?
Be very careful answering this question as most organization employ professionals with an array of personalities and characteristics. You don't want to give the impression that you're going to have problems working with anyone currently employed at the organization. If you through out anything trivial you're going to look like a whiner. Only disloyalty to the organization or lawbreaking should be on your list of personal characteristics of people you can't work with.
5. Why are you leaving last job?
Although this would seem like a simple question, it can easily become tricky. You shouldn't mention salary being a factor at this point As General manager in manufacturing. If you're currently employed, your response can focus on developing and expanding your career and even yourself. If you're current employer is downsizing, remain positive and brief. If your employer fired you, prepare a solid reason. Under no circumstance should you discuss any drama or negativity, always remain positive.
6. Why do you want this job As General manager in manufacturing?
This question typically follows on from the previous one. Here is where your research will come in handy. You may want to say that you want to work for a company that is Global Guideline, (market leader, innovator, provides a vital service, whatever it may be). Put some thought into this beforehand, be specific, and link the company's values and mission statement to your own goals and career plans.
7. What do you know about our company?
You always want to make sure that you're pretty familiar with the company that you're interviewing with. Nothing looks worse than a candidate who knows nothing about the company they say they're interested in working for. Find out everything you can about the company, its culture and its goals. You will also want to know how the company is positioned in its market as well as who its major competitors are.
8. What have you learned from mistakes on this job?
Candidates without specific examples often do not seem credible. However, the example shared should be fairly inconsequential, unintentional, and a learned lesson should be gleaned from it. Moving ahead without group assistance while assigned to a group project meant to be collaborative is a good example.
9. Can you describe your ideal boss/supervisor?
During the interview As General manager in manufacturing process employers will want to find out how you respond to supervision. They want to know whether you have any problems with authority, If you can work well as part of a group (see previous question) and if you take instructions well etc.
Never ever ever, criticize a past supervisor or boss. This is a red flag for airlines and your prospective employer will likely assume you are a difficult employee, unable to work in a team or take intruction and side with your former employer.
10. How do you prioritize your work?
Depends on the situation... I like to label certain tasks as either A B or C...A being the one that requires immediate attention, and C which are tasks that aren't urgent but eventually need to get done... I like to focus my work As General manager in manufacturing on the things that need to get done, and done quickly... While balancing the other work alongside our first priorities.
Discuss qualities you possess required to successfully complete the job duties.
12. Tell us about a suggestion you have made that has benefited an organization you've worked for?
This is another opportunity to show the interviewer what you're capable of so make sure to be prepared for this type of question. Have an example ready and make sure its an example of a suggestion you've made that was accepted and that have positive influence. If you can come up with an example that relates to the position you're applying for that would be even better.
13. Explain me what do you know about our company?
Bad Answer: They don't know much about the company. If a candidate is serious and enthusiastic, they should have done some basic research.
Good answer: An answer that shows they've really done their homework and know what the company does, any important current events that involve the company, and the work culture.
14. What are you looking for in a new position As General manager in manufacturing?
I've been honing my skills As General manager in manufacturing for a few years now and, first and foremost, I'm looking for a position where I can continue to exercise those skills. Ideally the same things that this position has to offer. Be specific.
15. How do you measure success?
There may be several good answers. Some include: you're able to set realistic, yet aggressive goals that push you and you're able to achieve them, you go the extra mile on all projects, client satisfaction is high, your boss is elated at your performance on all projects, etc.
16. Tell me about a time when you helped resolve a dispute between others?
Be sure to discuss a very specific example. Tell the interviewer what methods you used to solve the problem without focusing on the details of the problem.
17. Top 17 Behavioral Interview Questions As General manager in manufacturing:
Behavioral interviews As General manager in manufacturing where popularized by industrial psychologists in the 1970s, and have been used at big companies like AT&T. The idea behind them is that past responses to situations are the best predictor of how candidates will respond in the future.
1. Tell me about a time you faced a conflict while working as part of a team.
2. Talk about a goal you set for yourself. What did you do to make sure you met the goal?
3. Give an example of a time when you had to work with someone with a very different personality from yours.
4. Talk about an instance where you wish you'd handled a situation differently with a team member.
5. What's the most difficult problem you have had to solve As General manager in manufacturing?
6. Give an example of how you handled a situation where you needed information from a colleague who wasn't responsive.
7. Talk about a time when you had problems building a relationship with a key team member. What did you do?
8. Tell me about an instance when it was important to make a great impression on a client. What did you do?
9. Tell me about a situation where you had to work with a difficult client.
10. Tell me about a situation where you disappointed a client, and how you tried to fix it.
11. Talk about a time when you had to strategize to meet all your obligations.
12. Talk about a time when you failed at something. How did you react?
13. Talk about a time you took on a leadership role.
14. Tell me about a long-term project you oversaw. How did you keep it focused and on schedule?
15. Talk about a time when you were under a lot of stress. What caused it, and how did you manage?
16. Do you prefer to work alone or with others As General manager in manufacturing?
17. Tell me about a time when you were overwhelmed by the amount of work on your agenda. How did you handle it?
While discussing this, be sure to stress specific examples of what you bring to the company. Good qualities include resolve to fulfill job responsibilities, optimism, and a desire to be as efficient as possible while at work.
19. Why was there a gap in your employment As General manager in manufacturing?
If you were unemployed for a period of time, be direct and to the point about what you've been up to (and hopefully, that's a litany of impressive volunteer and other mind-enriching activities, like blogging or taking classes). Then, steer the conversation toward how you will do the job and contribute to the organization: “I decided to take a break at the time, but today I'm ready to contribute to this organization in the following ways.”
20. Tell me about a time when you had to think strategically?
There was a time when I was told I had to get rid of 20% of my people. I had to determine which persons I needed the most by determining who could do what. I had to put aside personal feelings so that I could keep a working crew to handle he same workload with less people.
21. Tell me about a time when you successfully handled a situation?
For this question, the interviewer wants to know what you do in a situation that doesn't have a clear answer. This will help the interviewer know how you respond to unforeseen challenges.
22. What's your management style?
The best managers are strong but flexible, and that's exactly what you want to show off in your answer. (Think something like, “While every situation and every team member requires a bit of a different strategy, I tend to approach my employee relationships as a coach...”) Then, share a couple of your best managerial moments, like when you grew your team from five to 15 or coached an underperforming employee to become the company's top employee.
23. How would you estimate the weight of the Chrysler building?
This is a process guesstimate where the interviewer wants to know if you know what to ask. First, you would find out the dimensions of the building (height, weight, depth). This will allow you to determine the volume of the building. Does it taper at the top? (Yes.) Then, you need to estimate the composition of the Chrysler building. Is it mostly steel? Concrete? How much would those components weigh per square inch? Remember the extra step: find out whether you're considering the building totally empty or with office furniture, people, etc. If you're including the contents, you might have to add 20 percent or so to the building's weight.
24. Do you like being around people?
People skills are a necessity for medical assistants. When answering this question, be sure to show that you enjoy interacting and working with others and that you also derive great enjoyment from helping others. This will show that you are a team player and that you would be a valuable team member As General manager in manufacturing.
The list of crucial character traits includes patience, tact, and poise, with personal and cultural sensitivity. One needs the ability to work long hours, with much walking and some physical tasks. But the most important trait of all is to love people and to have the desire to care for them.
26. What other companies are you interviewing with?
Companies ask this for a number of reasons, from wanting to see what the competition is for you to sniffing out whether you're serious about the industry. “Often the best approach is to mention that you are exploring a number of other similar options in the company's industry,”. It can be helpful to mention that a common characteristic of all the jobs you are applying to is the opportunity to apply some critical abilities and skills that you possess. For example, you might say 'I am applying for several positions with IT consulting firms where I can analyze client needs and translate them to development teams in order to find solutions to technology problems.'
Do the following steps:
☛ 1. Turn ON two switches, and leave one OFF.
☛ 2. Wait a few minutes.
☛ 3. Turn one switch from ON to OFF. One is now ON and two are OFF
☛ 4. Enter the room. - If the light is ON, it is controlled by the switch you left ON. - If the light bulb is OFF, touch it. If it is warm it is controlled by the switch you turned ON and OFF. If it is cold, it is controlled by the switch you never turned on.
28. How well do you know this industry?
Two things businesses need to pay attention to in their industries are what their competition is doing and the customers. You may not always agree with your competitors but it is important to be aware of what changes they are making. Very well. I have been in the industry for over 6 years.
29. Tell me an occasion when you needed to persuade someone to do something?
Interpersonal relationships are a very important part of being a successful care assistant. This question is seeking a solid example of how you have used powers of persuasion to achieve a positive outcome in a professional task or situation. The answer should include specific details.
30. What have you done to reduce costs, increase revenue, or save time?
Even if your only experience is an internship, you have likely created or streamlined a process that has contributed to the earning potential or efficiency of the practice. Choose at least one suitable example and explain how you got the idea, how you implemented the plan, and the benefits to the practice.
31. How would you describe your approach to General manager in manufacturing?
In more general terms, a question such as this gives a candidate the opportunity to talk about their professional philosophy and skills. While the question is general in nature, the best answers are usually quite specific, picking one or two points and exemplifying them with instances from personal history.
32. Why are you leaving the present company?
According to me we can not grow in the field without taking more responsibilities and risks and also we can't enhance our team leading capabilities, managerial skills without expose to wide range of people.
33. How many tennis balls can you fit into a limousine? 1,000? 10,000? 100,000? Seriously?
Well, seriously, you might get asked brainteaser questions like these, especially in quantitative jobs. But remember that the interviewer doesn't necessarily want an exact number-he wants to make sure that you understand what's being asked of you, and that you can set into motion a systematic and logical way to respond. So, just take a deep breath, and start thinking through the math. (Yes, it's OK to ask for a pen and paper!)
34. Where do you see yourself in five years As General manager in manufacturing?
If asked this question, be honest and specific about your future goals, but consider this:
A hiring manager wants to know
☛ a) if you've set realistic expectations for your career,
☛ b) if you have ambition (a.k.a., this interview isn't the first time you're considering the question), and
☛ c) if the position aligns with your goals and growth. Your best bet is to think realistically about where this position could take you and answer along those lines. And if the position isn't necessarily a one-way ticket to your aspirations?
It's OK to say that you're not quite sure what the future holds, but that you see this experience playing an important role in helping you make that decision.
35. What does success mean to you?
I am punctual, I always have excellent attendance on any job As General manager in manufacturing, I have a keen eye for both large and small details, and I am always finding ways to improve a process and shorten the length of time it takes to complete a project.
In asking this interview question, your interviewer wants to get a sense of how you will respond to conflict. Anyone can seem nice and pleasant in a job interview, but what will happen if you're hired?. Again, you'll want to use the S-T-A-R method, being sure to focus on how you handled the situation professionally and productively, and ideally closing with a happy ending, like how you came to a resolution or compromise.
One of employees was conflicting with other and colleague who was prove his was wrong hi denied and was invite union to defend him but we have prove his wrong and I was facing disciplinary action.
38. Do you work well on a team? How would you define teamwork?
I would define team work as getting the job done As General manager in manufacturing whether that means if I have to do more then the guy next to me as long as the work gets finished.
39. Are You a ‘People' Person?
Although it may be phrased a little differently, the gist of this question is clear:
Do you like being around people? If you don't, being a medical assistant isn't a good fit for you. After all, you'll be working directly with patients throughout the day. It helps a lot if you sincerely like interacting with them. While answering this question, make sure to mention that you like helping people too. This will drive home the point that you are a talented medical assistant and would be a valuable part of the team As General manager in manufacturing.
40. Why should I hire you As General manager in manufacturing?
To close the deal on a job offer, you MUST be prepared with a concise summary of the top reasons to choose you. Even if your interviewer doesn't ask one of these question in so many words, you should have an answer prepared and be looking for ways to communicate your top reasons throughout the interview process.
OK, if you get the admittedly much tougher follow-up question as to why you were let go (and the truth isn't exactly pretty), your best bet is to be honest (the job-seeking world is small, after all). But it doesn't have to be a deal-breaker. Share how you've grown and how you approach your job and life now as a result. If you can position the learning experience as an advantage for this next job, even better.
42. What's a time you disagreed with a decision that was made at work?
Everyone disagrees with the boss from time to time, but in asking this interview question As General manager in manufacturing, hiring managers want to know that you can do so in a productive, professional way. “You don't want to tell the story about the time when you disagreed but your boss was being a jerk and you just gave in to keep the peace. And you don't want to tell the one where you realized you were wrong,”. Tell the one where your actions made a positive difference on the outcome of the situation, whether it was a work-related outcome or a more effective and productive working relationship.
43. Explain a time when you did not get along with your coworker?
I used to lock heads with a fellows. We disagreed over a lot of things – from the care of civilians to who got what shifts to how to speak with a victim's family. Our personalities just didn't mesh. After three months of arguing, I pulled her aside and asked her to lunch. At lunch, we talked about our differences and why we weren't getting along. It turns out, it was all about communication. We communicated differently and once we knew that, we began to work well together. I really believe that talking a problem through with someone can help solve any issue.
44. Why are manhole covers round?
This is a classic brainteaser, which was reportedly first asked by a Microsoft interviewer. Here's how to ""solve"" this brainteaser (remember to speak and reason out loud while solving this brainteaser): Why are manhole covers round? Could there be a structural reason? Why aren't manhole covers square? It would make it harder to fit with a cover. You'd have to rotate it exactly the right way.
The pipes below are also round, so fitting them might be easier, as might be making them. So many manhole covers are round because they don't need to be rotated. There are no corners to deal with. Also, a round manhole cover won't fall into a hole because it was rotated the wrong way, so it's safer. Looking at this, it seems corners are a problem. You can't cut yourself on a round manhole cover. And because it's round, it can be more easily transported. One person can roll it.
45. Do you like to start personal relationships with other employees?
Well, the right answer is yes and no. Good personal relations can improve the overall performance of a team. But on the other hand, you should not let your emotions to affect your decisions in work.
46. How do you think I rate as an interviewer?
I think you did fine. I'm sure you've conducted a lot of interviews, and it's probably second nature for you now. Thanks for taking the time to meet with me today. I'm sure you have a lot of things you have to juggle every day.
I'd say you rate at least ten out of ten. The questions you asked seemed spot on. I can tell you guys are working hard to find the perfect applicant for the job. I'm glad I could meet with you.
47. What are your salary expectations As General manager in manufacturing?
This question is like a loaded gun, tricky and dangerous if you're not sure what you are doing. It's not uncommon for people to end up talking salary before really selling their skills, but knowledge is power as this is a negotiation after all. Again, this is an area where doing your research will be helpful as you will have an understanding of average salary.
One approach is asking the interviewer about the salary range, but to avoid the question entirely, you can respond that money isn't a key factor and you're goal is to advance in your career. However, if you have a minimum figure in mind and you believe you're able to get it, you may find it worth trying.
48. Describe to me the position As General manager in manufacturing you're applying for?
This is a “homework” question, too, but it also gives some clues as to the perspective the person brings to the table. The best preparation you can do is to read the job description and repeat it to yourself in your own words so that you can do this smoothly at the interview.
49. What problems have you encountered at work?
Wow, do we have problems! Where do I begin? Well, most of the problems are internal, just people not working well with each other. I have one person on our team who is a real problem, but it seems like management is afraid to do anything about it. So we all end up having to do extra work to cover for this person, who just doesn't work. We all say that he's retired in place. I think he's just holding on until retirement in a couple years. But he's a real problem. I complain about it--a lot--but nothing ever seems to get done. I've even written negative reviews about the person, hoping he will get canned, but it doesn't happen. I can't wait for him to retire.
50. Do you work well under pressure?
Yes.. When it comes down to the wire, the best thing I can to remain focused, have some flexibility, and understand priorities.. Giving them attention in the order they are needed.
51. Explain an idea that you have had and have then implemented in practice?
Often an interview guide will outline the so-called ‘STAR' approach for answering such questions; Structure the answer as a situation, task, action, and result: what the context was, what you needed to achieve, what you did, and what the outcome was as a result of your actions.
52. What kind of salary do you need As General manager in manufacturing?
This is a loaded question and a nasty little game that you will probably lose if you answer first. So, do not answer it. Instead, say something like, that's a tough question. Can you tell me the range for this position? In most cases, the interviewer, taken off guard, will tell you. If not, say that it can depend on the details of the job. Then give a wide range.
53. Are you planning to continue your studies and training As General manager in manufacturing?
If asked about plans for continued education, companies typically look for applicants to tie independent goals with the aims of the employer. Interviewers consistently want to see motivation to learn and improve. Continuing education shows such desires, especially when potentials display interests in academia potentially benefiting the company.
Answering in terms of “I plan on continuing my studies in the technology field,” when offered a question from a technology firm makes sense. Tailor answers about continued studies specific to desired job fields. Show interest in the industry and a desire to work long-term in said industry. Keep answers short and to the point, avoiding diatribes causing candidates to appear insincere.
54. Do you have any question regarding this job As General manager in manufacturing?
Never ask Salary, perks, leave, place of posting, etc. regarded questions. Try to ask more about the company to show how early you can make a contribution to your organization like. “Sir, with your kind permission I would like to know more about induction and developmental programs?” OR Sir, I would like to have my feedback, so that I can analyze and improve my strengths and rectify my shortcomings.
55. What is your biggest achievement?
Quality work to be is about doing work to the require or set standard, which is very important when it comes to warehouse operations.
56. How do you evaluate your ability to handle conflict?
I pride myself on being a good problem solver. Through my previous job and management positions I have faced numerous conflicts in different situations, and my experiences have helped me to hone my issue resolution skills. I believe that it is important to get to and address the root of the issue, in a respectable manner.
57. What features of your previous jobs have you disliked?
It's easy to talk about what you liked about your job in an interview, but you need to be careful when responding to questions about the downsides of your last position. When you're asked at a job interview about what you didn't like about your previous job, try not to be too negative. You don't want the interviewer to think that you'll speak negatively about this job or the company should you eventually decide to move on after they have hired you.
58. Explain an occasion when you had to adapt in the face of a difficult situation?
One of the most useful interview tactics is to remain positive about your work and achievements. This question lets the candidate draw on their own personal history to show how they have been positive and successful in the face of difficulties. Choose a specific occasion to describe, rather than dealing with generic platitudes.
Demonstrate both loyalty and ambition in the answer to this question. After sharing your personal ambition, it may be a good time to ask the interviewer if your ambitions match those of the company.
60. What is your desired salary As General manager in manufacturing?
Bad Answer: Candidates who are unable to answer the question, or give an answer that is far above market. Shows that they have not done research on the market rate, or have unreasonable expectations.
Good answer: A number or range that falls within the market rate and matches their level of mastery of skills required to do the job.
61. Do you have any questions for me?
Good interview questions to ask interviewers at the end of the job interview include questions on the company growth or expansion, questions on personal development and training and questions on company values, staff retention and company achievements.
62. How have you changed in the last five years?
All in a nutshell. But I think I've attained a level of personal comfort in many ways and although I will change even more in the next 5-6 years I'm content with the past 6 and what has come of them.
63. How do you keep each member of the team involved and motivated?
Many managers mistakenly think that money is the prime motivator for their employees. However, according to surveys by several different companies, money is consistently ranked five or lower by most employees. So if money is not the best way to motivate your team, what is?
Employees' three most important issues according to employees are:
☛ Respect
☛ A sense of accomplishment
☛ Recognition
64. Give me an example of an emergency situation that you faced. How did you handle it?
There was a time when one of my employers faced the quitting of a manager in another country. I was asked to go fill in for him while they found a replacement and stay to train that person. I would be at least 30 days. I quickly accepted because I knew that my department couldn't function without me.
65. How much do you expect to get paid As General manager in manufacturing?
For this be prepared and research salary to find out what similar positions are paying in your area before you go to the interview. Try to find this information out before giving your salary expectations. You can and should provide a range instead of an exact number. But again, don't say any numbers you're not comfortable with because if the employer offers you a salary at the lowest end of your range, you don't have much to negotiate with when it comes to getting a higher salary.
66. Why should the we hire you as this position As General manager in manufacturing?
This is the part where you link your skills, experience, education and your personality to the job itself. This is why you need to be utterly familiar with the job description as well as the company culture. Remember though, it's best to back them up with actual examples of say, how you are a good team player.
67. How do you plan to go by an example for your subordinates?
Sticking to the rules by yourself, working hard and not mind participating on basic tasks is a good answer.
