1. Explain what are your strengths As Precision Sheet Metal Fabricator?
Bad Answer: Candidate is unprepared for question or only gives generic answers.
This is the most common job interview question - everybody should be expecting it. If they don't seem prepared, or give a fairly stock answer, it's probably a bad sign.
Good answer: The consensus is to go for quality, not quantity here. Candidates should give a short list of strengths, and back each one up with examples that illustrate the strength. Also, they should explain how these strengths will be useful in the job you're applying for, and use this question to say something interesting about themselves.
2. What are your weaknesses for Precision Sheet Metal Fabricator position?
Try not to be too critical when answering this question. Instead, pick one of your weaknesses and try to turn it into a positive.
For example, you could be a perfectionist, which means that you sometimes take longer on tasks, but you make sure that they are completed to a high quality. It is important to make a negative into a positive as it doesn't make you appear overly critical and shows you can reflect on your own performance.
3. How did you hear about the position As Precision Sheet Metal Fabricator?
Another seemingly innocuous interview question, this is actually a perfect opportunity to stand out and show your passion for and connection to the company and for job As Precision Sheet Metal Fabricator. For example, if you found out about the gig through a friend or professional contact, name drop that person, then share why you were so excited about it. If you discovered the company through an event or article, share that. Even if you found the listing through a random job board, share what, specifically, caught your eye about the role.
4. What do you think about Teamwork?
I enjoy teamwork and am used to shift work. I think I would adapt well to the role. I am looking for new challenges As Precision Sheet Metal Fabricator and I know I would learn a lot as cabin crew, not just about people and places, but skills like first aid too, how can I help others with in my limits.
5. Tell me a difficult situation you have overcome in the workplace?
Conflict resolution, problem solving, communication and coping under pressure are transferable skills desired by many employers As Precision Sheet Metal Fabricator.
Answering this question right can help you demonstrate all of these traits.
☛ Use real-life examples from your previous roles that you are comfortable explaining
☛ Choose an example that demonstrates the role you played in resolving the situation clearly
☛ Remain professional at all times – you need to demonstrate that you can keep a cool head and know how to communicate with people
Along similar lines, the interviewer wants to uncover whether this position As Precision Sheet Metal Fabricator is really in line with your ultimate career goals. While “an GGL star” might get you a few laughs, a better bet is to talk about your goals and ambitions-and why this job will get you closer to them.
7. Your coworker highlights your mistakes in front of everyone, how do you handle the situation?
Admit to the mistake without being emotional, but then discuss how you are being proactive in getting it fixed. Lastly, pull the co-worker aside later on to tell them that you'd appreciate it if they gave you the feedback 1:1 first before throwing you under the bus.
Try to include improvement activities that relate to the job As Precision Sheet Metal Fabricator. A wide variety of activities can be mentioned as positive self-improvement. Have some good ones handy to mention.
9. If you had enough money to retire would you?
Just be honest. If you would retire then say so. But since you can't retire, and the interviewer already knows this, simply answer that since you can't this is type of work you prefer doing. However, if you wouldn't retire if you had the money then explain why. Work is an important element of happiness for most people and many won't retire even when they can.
10. When were you most satisfied in your job As Precision Sheet Metal Fabricator?
I'm a people person. I was always happiest and most satisfied when I was interacting with community residents, making sure I was able to meet their needs and giving them the best possible comfort in a tough situation. It was my favorite part of the job, and it showed. Part of the reason I'm interested in this job is that I know I'd have even more interaction with the public, on an even more critical level.
In many scenarios, you will not have all the information needed. The key is to make the best possible decision based on what you deem to be a sufficient amount of information.
12. How do you think you might fit this position As Precision Sheet Metal Fabricator?
An important part of research before the interview is what the company does and how the job role relates to that. This includes the company philosophy and working methods. Questions such as this seek to find out how a candidate will fit into the organisation As Precision Sheet Metal Fabricator. Answer positively; including practical examples of how you anticipate you would perform in the new role.
13. Explain me about a problem or disagreement you had with previous supervisor?
This question is trap. It is meant to see whether or not you'll speak poorly of an employer. No one wants to hire someone who's going to speak poorly of them down the road. Stay upbeat and positive - and most of all don't say anything negative about a previous employer.
14. Top 11 Questions to Verify Experience and Credentials As Precision Sheet Metal Fabricator:
Sometimes people want a job a little too bad - and they may fudge their credentials and experience a bit.
If you've run into this problem, are worried about it, or have credentials and experience that are absolutely essential, you may need to ask a few verification questions.
If you are a candidate, you should review your resume and make sure you know all the key points, and that nothing has been misconstrued.
1. What grades did you get in college?
2. What were your responsibilities when you worked in job x?
3. How many people were on your team at your last job?
4. What will your previous manager/supervisor say when I ask where you needed to improve?
5. What was your beginning and ending salary at job x?
6. What were your beginning and ending titles at job x?
7. Are you eligible for rehire at job x?
8. What tools are necessary for performing job x?
9. Describe to me how you would perform [x typical job task].
10. What was the focus of your thesis?
11. When did you leave company x?
You want to first understand why the policy was put into effect. From there, if you truly disagree with it, explain your position to your management. If they don't change it, then you must accept their decision and continue to work or the alternative decision would be to find a new job.
16. Tell me about a time when you had to think strategically?
There was a time when I was told I had to get rid of 20% of my people. I had to determine which persons I needed the most by determining who could do what. I had to put aside personal feelings so that I could keep a working crew to handle he same workload with less people.
17. If the company you worked for was doing something unethical or illegal, what would you do?
Report it to the leaders within the company. True leaders understand business ethics are important to the company's longevity
18. What qualities do you look for in a boss?
Remain optimistic and do not be too specific. Good attributes include moral character, honesty, and intelligence since managers usually believe they possess these qualities.
19. How do you evaluate success As Precision Sheet Metal Fabricator?
I evaluate success As Precision Sheet Metal Fabricator in different ways. At work, it is meeting the goals set by my supervisors and my fellow workers. It is my understanding, from talking to other employees, that the Global Guideline company is recognized for not only rewarding success but giving employees opportunity to grow as well.
20. Describe a time when you anticipated potential problems and developed preventive measures?
The key here is to show that you were proactive. How did you find out about the potential problems? How did you address it quickly?
21. Why did you leave your last job As Precision Sheet Metal Fabricator?
Regardless of why you left your last job make sure to stay positive. Always smile and focus on the positive reason such you were seeking the opportunity to expand your career opportunities, your interest in working with a new firm that provided greater opportunity, you desired to work in a new location, etc. Don't reference previous job problems or differences with management that caused you to leave. If you stay positive, your answer may help you. If you're negative, you will likely decrease your chances of getting the job for which you're interviewing.
22. What is your greatest strength As Precision Sheet Metal Fabricator?
This is your time to shine. Just remember the interviewer is looking for work related strengths As Precision Sheet Metal Fabricator. Mention a number of them such as being a good motivator, problem solver, performing well under pressure, being loyal, having a positive attitude, eager to learn, taking initiative, and attention to detail. Whichever you go for, be prepared to give examples that illustrate this particular skill.
23. What is the most irritating thing you've experienced about your co-workers?
This question is designed to find out if you get along well on team, with other and whether or not you'll be a fit with the interviewer's organization. It's a trap. Think real hard but fail to come up anything that irritated you about your co-workers. A short positive response is best.
24. Where do you see yourself in five years? Ten years?
Bad Answer: A generic or uninspired answer. Also, answers that show that this career/company is just a temporary stop for them.
Good answer: One that shows the candidate has thought about this question, has plans, and that those plans align with the job and a career path that is possible in the company. You want to see that this candidate is a good long term investment.
25. What do you know about our competition?
Make sure you do your research on their competitors. You can find this by going to yahoo finance and click on their competitors (if they are public). From there research the news on them and go to their websites to understand their positioning on solutions and vision. You can also research local regional companies that are their competition (if it's a smaller private company on a regional scale) by simply typing in similar product offerings in the Google search followed by the city. Make sure you know their competitor's vision, products, culture, and how they are differentiated against their competition (and if they're not, how they could be)
26. What's been your biggest failure to date?
Describe your biggest failure and discuss what you've learned from it and ideally how you've been successful since because of that lesson.
27. Explain a time when you did not get along with your coworker?
I used to lock heads with a fellows. We disagreed over a lot of things – from the care of civilians to who got what shifts to how to speak with a victim's family. Our personalities just didn't mesh. After three months of arguing, I pulled her aside and asked her to lunch. At lunch, we talked about our differences and why we weren't getting along. It turns out, it was all about communication. We communicated differently and once we knew that, we began to work well together. I really believe that talking a problem through with someone can help solve any issue.
28. Why do you want to join our company?
This is a question that is aimed at finding out whether you know enough about the company and the basic market. The best way to answer this question is to do some research on the company and highlight its positive points.
29. Describe your academic achievements?
Think of a time where you really stood out and shined within college. It could be a leadership role in a project, it could be your great grades that demonstrate your intelligence and discipline, it could be the fact that you double majored. Where have you shined?
30. What do you feel you deserve to be paid?
Do your research before answering this question - first, consider what the market average is for this job. You can find that by searching on Google (title followed by salary) and globalguideline.com and other websites. Then, consider this - based on your work experience and previous results, are you above average, if yes, by what % increase from your pay today from your perspective? Also - make sure if you aim high you can back it up with facts and your previous results so that you can make a strong case.
The list of crucial character traits includes patience, tact, and poise, with personal and cultural sensitivity. One needs the ability to work long hours, with much walking and some physical tasks. But the most important trait of all is to love people and to have the desire to care for them.
32. Why do you want to work in this industry As Precision Sheet Metal Fabricator?
Make sure you research the industry first. Then find at least 3 core things about that industry that you're passionate about (for example: how their solutions impact clients, their culture, the leadership, etc)
33. Do you work well on a team? How would you define teamwork?
I would define team work as getting the job done As Precision Sheet Metal Fabricator whether that means if I have to do more then the guy next to me as long as the work gets finished.
34. Where do you see yourself in five years As Precision Sheet Metal Fabricator?
If asked this question, be honest and specific about your future goals, but consider this:
A hiring manager wants to know
☛ a) if you've set realistic expectations for your career,
☛ b) if you have ambition (a.k.a., this interview isn't the first time you're considering the question), and
☛ c) if the position aligns with your goals and growth. Your best bet is to think realistically about where this position could take you and answer along those lines. And if the position isn't necessarily a one-way ticket to your aspirations?
It's OK to say that you're not quite sure what the future holds, but that you see this experience playing an important role in helping you make that decision.
35. What are ideas or initiatives you've led and what was the outcome?
Describe your most unique ideas and initiatives that had the best results for the company. Make sure you highlight your creativity, your results, your diligence and your ability to execute.
36. How would you impact the company?
Consider first the role that you're applying for and then think of 3 ways where you could potentially impact the company's bottom line and top line. Then consider how you impact the company in a creative manner (how do you help productivity, the development of new products, marketing etc - of course this part is specific to the role you're applying for)
37. Did you get on well with your last manager?
A dreaded question for many! When answering this question never give a negative answer. “I did not get on with my manager” or “The management did not run the business well” will show you in a negative light and reduce your chance of a job offer. Answer the question positively, emphasizing that you have been looking for a career progression. Start by telling the interviewer what you gained from your last job As Precision Sheet Metal Fabricator
38. What are your thoughts on failure?
Failure happens. It's a part of life. The key is understanding that you can't be perfect at everything and more importantly you're going to learn from failures to come out stronger.
39. Describe a time where you've failed and bounced back?
Share a story to describe this. For example: "I accidentally made the mistake of telling a customer I could deliver on a solution set on a certain date and then later found out our business partner couldn't do it on that time. I learned that I shouldn't rush into important decisions and promises like this and that I should always check with my counterparts first before committing to a statement of work."
40. Where do you see yourself in 5 years with your career?
Be sure to paint a clear picture of your career vision that demonstrates your aspirations and goals that are realistic. This could emphasize increased responsibility, the ability to manage people and so forth
Do the following steps:
☛ 1. Turn ON two switches, and leave one OFF.
☛ 2. Wait a few minutes.
☛ 3. Turn one switch from ON to OFF. One is now ON and two are OFF
☛ 4. Enter the room. - If the light is ON, it is controlled by the switch you left ON. - If the light bulb is OFF, touch it. If it is warm it is controlled by the switch you turned ON and OFF. If it is cold, it is controlled by the switch you never turned on.
42. How do you handle your anger?
I don't get angry very easily but in the rare occasion that I do, I hold it in and act as though nothing is wrong.
43. What makes a product successful?
Basing on the monetization, these questions give you the chance to prove your personal try. Do not show extremely your optimism and pursue the unreality. Give your answers the reality.
It is useful to predict a five to ten- year- scenario of expectations in order to gain your targets that you set up and it is the period of time to see how your plans and targets are performed.
Therefore, the quality of the product and marketability of the mentioned industry need to be highlighted. This will help you to achieve the interviewer's attention and insurance to you personality and you can get the honest and long- term goals.
44. How do you feel about giving back to the community?
Describe your charitable activities to showcase that community work is important to you. If you haven't done one yet, go to www.globalguideline.com - charitable work is a great way to learn about other people and it's an important part of society - GET INVOLVED!
45. How do you inspire others to be better?
First, the key to inspiring others it to first understand what their goals and objectives are. Once you understand what people want, you can inspire them with a vision that aligns to what they care about. People generally care about having purpose, being successful (and being recognized for it), contributing in a meaningful way, and financial rewards (to a degree) and much more. Then once you understand what people set as goals, you can inspire them through 1:1 pep talks, a presentation to multiple people and so forth.
46. What challenges are you looking for in this position?
A typical interview question to determine what you are looking for your in next job, and whether you would be a good fit for the position being hired for, is “What challenges are you looking for in a position As Precision Sheet Metal Fabricator?” The best way to answer questions about the challenges you are seeking is to discuss how you would like to be able to effectively utilize your skills and experience if you were hired for the job. You can also mention that you are motivated by challenges, have the ability to effectively meet challenges, and have the flexibility and skills necessary to handle a challenging job. You can continue by describing specific examples of challenges you have met and goals you have achieved in the past.
47. How long do you envision yourself staying with this company?
Understand that companies invest a lot of money into hiring the right staff. You want to emphasize that you are in it for the long run and you want to develop a career there and that it's not just a "5 month stepping stone" type of a job. You should be thinking how you're going to grow with that company. After all, don't you want to invest your energy and time with a company that is going to continue to be successful and one that will help you grow?
48. Why are manhole covers round?
This is a classic brainteaser, which was reportedly first asked by a Microsoft interviewer. Here's how to ""solve"" this brainteaser (remember to speak and reason out loud while solving this brainteaser): Why are manhole covers round? Could there be a structural reason? Why aren't manhole covers square? It would make it harder to fit with a cover. You'd have to rotate it exactly the right way.
The pipes below are also round, so fitting them might be easier, as might be making them. So many manhole covers are round because they don't need to be rotated. There are no corners to deal with. Also, a round manhole cover won't fall into a hole because it was rotated the wrong way, so it's safer. Looking at this, it seems corners are a problem. You can't cut yourself on a round manhole cover. And because it's round, it can be more easily transported. One person can roll it.
49. What do you know about the company?
Any candidate can read and regurgitate the company's “About” page. So, when interviewers ask this, they aren't necessarily trying to gauge whether you understand the mission-they want to know whether you care about it. Start with one line that shows you understand the company's goals, using a couple key words and phrases from the website, but then go on to make it personal. Say, “I'm personally drawn to this mission because…” or “I really believe in this approach because…” and share a personal example or two.
50. Why do you want to work As Precision Sheet Metal Fabricator for this organisation?
Being unfamiliar with the organisation will spoil your chances with 75% of interviewers, according to one survey, so take this chance to show you have done your preparation and know the company inside and out. You will now have the chance to demonstrate that you've done your research, so reply mentioning all the positive things you have found out about the organisation and its sector etc. This means you'll have an enjoyable work environment and stability of employment etc – everything that brings out the best in you.
51. Do you have any questions for me?
Good interview questions to ask interviewers at the end of the job interview include questions on the company growth or expansion, questions on personal development and training and questions on company values, staff retention and company achievements.
52. Explain me about your experience working in this field As Precision Sheet Metal Fabricator?
I am dedicated, hardworking and great team player for the common goal of the company I work with. I am fast learner and quickly adopt to fast pace and dynamic area. I am well organized, detail oriented and punctual person.
These are important for support workers. But they differ from the communication skills of a CEO or a desktop support technician. Communication must be adapted to the special ways and needs of the clients. Workers must be able to not only understand and help their clients, but must project empathy and be a warm, humane presence in their lives.
54. How much do you expect to get paid As Precision Sheet Metal Fabricator?
For this be prepared and research salary to find out what similar positions are paying in your area before you go to the interview. Try to find this information out before giving your salary expectations. You can and should provide a range instead of an exact number. But again, don't say any numbers you're not comfortable with because if the employer offers you a salary at the lowest end of your range, you don't have much to negotiate with when it comes to getting a higher salary.
55. How many square feet of pizza are eaten in the United States each month?
This is a classic guesstimate question where you need to think aloud. And so first off you round the U.S. population to 300 million people (it's actually about 315 million but rounding will be much easier and your interviewer will not score you lower for rounding). Then estimate how many people eat pizza. A decent educated guess is two out of every three people, or 200 million. Now let's say the average pizza-eating person eats pizza twice a month, and eats two slices at a time. That's four slices a month. If the average slice of pizza is perhaps six inches at the base and 10 inches long, then the slice is 30 square inches of pizza. So, four pizza slices would be 120 square inches (30 times 4).
Since one square foot equals 144 square inches (12 times 12), let's assume that each person who eats pizza eats one square foot per month. Since there are 200 million pizza-eating Americans, 200 million square feet of pizza are consumed in the U.S. each month. To summarize: 300 million people in America, 200 million eat pizza, average slice of pizza is six inches at the base and 10 inches long or 30 square inches, average American eats four slices of pizza a month, four pieces times 30 square inches equals 120 square inches (one square foot is 144 square inches), so let's assume one square foot per person, and thus one square foot times 200 million people equals 200 million square feet of pizza a month.
56. Describe to me the position As Precision Sheet Metal Fabricator you're applying for?
This is a “homework” question, too, but it also gives some clues as to the perspective the person brings to the table. The best preparation you can do is to read the job description and repeat it to yourself in your own words so that you can do this smoothly at the interview.
57. Give me an example of when you competed hard and won?
You can reference many different areas here when discussing a story of where you won in competition: Work experience (ideal), sports, clubs, classes, projects.
58. What type of work environment do you prefer?
Ideally one that's similar to the environment of the company you're applying to. Be specific.
59. Do you have good computer skills?
It is becoming increasingly important for medical assistants to be knowledgeable about computers. If you are a long-time computer user with experience with different software applications, mention it. It is also a good idea to mention any other computer skills you have, such as a high typing rate, website creation, and more.
60. How would you motivate your team members to produce the best possible results?
Trying to create competitive atmosphere, trying to motivate the team as a whole, organizing team building activities, building good relationships amongst people.
61. What schedule do you hope to work? Are you willing to work extra hours?
Be honest. If you really want the job and are willing to work any schedule needed, say so. If, however, you have no intention of working late hours or weekends, simply let the interviewer know the hours that you are available to work. The same applies to extra hours. You are more likely to be hired if you are willing to work any time you are needed. However, saying that you are willing and then complaining about the hours once you start working is a recipe for disaster.
62. Do you like to start personal relationships with other employees?
Well, the right answer is yes and no. Good personal relations can improve the overall performance of a team. But on the other hand, you should not let your emotions to affect your decisions in work.
63. What types of personalities do you work with best?
In the past, I have found it difficult to work with others who see themselves as better than others, who can take criticism, and who refuse to work with others. I have found it challenging to work with them b/c I am a team oriented person who feels the importance of working together over the needs of the individual especially in a learning environment.
64. What's your salary history?
When you are interviewing for a new job, it is common practice for the company to ask you about your salary history. I typically want to know what the candidate's base salary is, if they receive any bonus, the average bonus amount, and any additional compensation or perks, such as 500k matching, stock grants or stock options, paid time off and how much they are required to pay towards their medical premiums.
65. Explain an idea that you have had and have then implemented in practice?
Often an interview guide will outline the so-called ‘STAR' approach for answering such questions; Structure the answer as a situation, task, action, and result: what the context was, what you needed to achieve, what you did, and what the outcome was as a result of your actions.
66. What do you think we could do better or differently?
This is a common one at startups. Hiring managers want to know that you not only have some background on the company, but that you're able to think critically about it and come to the table with new ideas. So, come with new ideas! What new features would you love to see? How could the company increase conversions? How could customer service be improved? You don't need to have the company's four-year strategy figured out, but do share your thoughts, and more importantly, show how your interests and expertise would lend themselves to the job.
Demonstrate both loyalty and ambition in the answer to this question. After sharing your personal ambition, it may be a good time to ask the interviewer if your ambitions match those of the company.
68. How do you think I rate as an interviewer?
I think you did fine. I'm sure you've conducted a lot of interviews, and it's probably second nature for you now. Thanks for taking the time to meet with me today. I'm sure you have a lot of things you have to juggle every day.
I'd say you rate at least ten out of ten. The questions you asked seemed spot on. I can tell you guys are working hard to find the perfect applicant for the job. I'm glad I could meet with you.
69. Why should the we hire you as this position As Precision Sheet Metal Fabricator?
This is the part where you link your skills, experience, education and your personality to the job itself. This is why you need to be utterly familiar with the job description as well as the company culture. Remember though, it's best to back them up with actual examples of say, how you are a good team player.
70. What is your biggest achievement?
Quality work to be is about doing work to the require or set standard, which is very important when it comes to warehouse operations.
71. How have you changed in the last five years?
All in a nutshell. But I think I've attained a level of personal comfort in many ways and although I will change even more in the next 5-6 years I'm content with the past 6 and what has come of them.
72. How do you handle stressful situations?
By remaining calm, weighing out all my options and executing a plan to get the situation resolve .
73. Give an example of a time you successfully worked As Precision Sheet Metal Fabricator on a team?
On the whole I prefer to stick to doing what I'm told rather than setting myself up to fail by doing things off my own bat. But there was this one time when I suggested to my boss at the pizza parlor that she try offering an ‘all you can eat' deal to students to boost trade on Mondays. She thought it was an interesting idea but nothing ever came of it.
74. How do you keep each member of the team involved and motivated?
Many managers mistakenly think that money is the prime motivator for their employees. However, according to surveys by several different companies, money is consistently ranked five or lower by most employees. So if money is not the best way to motivate your team, what is?
Employees' three most important issues according to employees are:
☛ Respect
☛ A sense of accomplishment
☛ Recognition
