What are Ceramics?
Submitted by: AdministratorThe word ceramic is derived from the Greek word keramikos, "having to do with pottery". The term covers inorganic non-metallic materials whose formation is due to the action of heat. Up until the 1950s or so, the most important of these were the traditional clays, made into pottery, bricks, tiles and the like, along with cements and glass.
Historically, ceramic products have been hard, porous, and brittle. Technical Ceramics can also be classified into three distinct material categories:
Oxides: Alumina, zirconia
Non-oxides: Carbides, borides, nitrides, silicides
Composites: Particulate reinforced combinations of oxides and non-oxides.
Ceramic materials can be crystalline or amorphous. They tend to fracture before any plastic deformation takes place, which results in poor toughness in these materials. Additionally, because these materials tend to be porous, the pores and other microscopic imperfections act as stress concentrators, decreasing the toughness further, and reducing the tensile strength. These combine to give catastrophic failures, as opposed to the normally much more gentle failure modes of metals.
Submitted by: Administrator
Historically, ceramic products have been hard, porous, and brittle. Technical Ceramics can also be classified into three distinct material categories:
Oxides: Alumina, zirconia
Non-oxides: Carbides, borides, nitrides, silicides
Composites: Particulate reinforced combinations of oxides and non-oxides.
Ceramic materials can be crystalline or amorphous. They tend to fracture before any plastic deformation takes place, which results in poor toughness in these materials. Additionally, because these materials tend to be porous, the pores and other microscopic imperfections act as stress concentrators, decreasing the toughness further, and reducing the tensile strength. These combine to give catastrophic failures, as opposed to the normally much more gentle failure modes of metals.
Submitted by: Administrator
Read Online Metallurgy Job Interview Questions And Answers
Top Metallurgy Questions
☺ | What is Iron Ferrite, what is it used for, and where is it found? |
☺ | What is the different between ferrite percentage and ferrite number? |
☺ | Why is Chromium Molybdenum steels used to build pressure vessels? What is special about the properties of Chromium Molybdenum steels that make them ideal for pressure vessels? |
☺ | What is the metallurgical explanation of effects of chromium, nickel, molybdenum, and carbon in stainless steels? |
☺ | What are the properties and application of manganese steel? |
Top School Education Categories
☺ | Mathematics Interview Questions. |
☺ | GMAT Interview Questions. |
☺ | Metallurgy Interview Questions. |
☺ | Polio Eradication Officer Interview Questions. |
☺ | Physical Education Interview Questions. |