1. Your coworker highlights your mistakes in front of everyone, how do you handle the situation?

Admit to the mistake without being emotional, but then discuss how you are being proactive in getting it fixed. Lastly, pull the co-worker aside later on to tell them that you'd appreciate it if they gave you the feedback 1:1 first before throwing you under the bus.

2. Top 11 Questions to Verify Experience and Credentials As Lathe Operator Metal Machining:

Sometimes people want a job a little too bad - and they may fudge their credentials and experience a bit.

If you've run into this problem, are worried about it, or have credentials and experience that are absolutely essential, you may need to ask a few verification questions.

If you are a candidate, you should review your resume and make sure you know all the key points, and that nothing has been misconstrued.


1. What grades did you get in college?

2. What were your responsibilities when you worked in job x?

3. How many people were on your team at your last job?

4. What will your previous manager/supervisor say when I ask where you needed to improve?

5. What was your beginning and ending salary at job x?

6. What were your beginning and ending titles at job x?

7. Are you eligible for rehire at job x?

8. What tools are necessary for performing job x?

9. Describe to me how you would perform [x typical job task].

10. What was the focus of your thesis?

11. When did you leave company x?

3. You notice there are too many non productive internal meetings being held, what do you do?

Reach out to your boss and let him know that first you value his leadership and organization but that you are being overwhelmed with the amount of non productive internal meetings.

4. Why do you want to work for this company?

Again be honest. The interviewer will be able to sense very quickly if you're be disingenuous. Your answer should be base on your person reasons, career aspirations as well as research you've performed on the company. The most important thing you should do is make sure to relate your answer to your long-term career goals.

5. Do you ever take work home with you?

Here are two great sample answers that might help get you started:

☛ I am an extremely organized person, so I tend to be able to get my work done at work. However, if the need arose I would not be against taking work home. I try not to make it a habit, since I do value my free time. I do realize though that the work we do is important, and sometimes you have to do what needs to be done.
☛ I do not shy away from taking work home with me. I know that meeting deadlines and doing outstanding work sometimes means taking a bit of it home. I do not have a problem doing that when the need arises.
☛ Make sure to give an honest answer. Lying about taking work home may turn out badly for you if it is required and you do not do it.

6. What relevant work experience do you have in this career field As Lathe Operator Metal Machining?

Talk about specific work related experience for the position you're interviewing for. Make sure the experience is relevant. Don't talk about previous experience that is not related to the position in question. If you don't have specific career related experience speak about prior experience that has helped you develop the specific knowledge and skills required for the position you are applying for.

7. How do you think you might fit this position As Lathe Operator Metal Machining?

An important part of research before the interview is what the company does and how the job role relates to that. This includes the company philosophy and working methods. Questions such as this seek to find out how a candidate will fit into the organisation As Lathe Operator Metal Machining. Answer positively; including practical examples of how you anticipate you would perform in the new role.

8. How do you stay organized?

By maintaining proper routine every day. Putting my strongest points with my weakness. High priority always comes first As Lathe Operator Metal Machining.

9. What type of people do you not work well with?

Be very careful answering this question as most organization employ professionals with an array of personalities and characteristics. You don't want to give the impression that you're going to have problems working with anyone currently employed at the organization. If you through out anything trivial you're going to look like a whiner. Only disloyalty to the organization or lawbreaking should be on your list of personal characteristics of people you can't work with.

10. How do you think your colleagues at your last job would describe you?

While your CV will say a lot about your work history As Lathe Operator Metal Machining, the interviewer will most likely look for greater detail with questions such as this. Be positive about previous experience, highlighting your own strengths.

11. What has disappointed you about a previous job?

Again, this question could get you in trouble so tread carefully. Some good answers might be that your previous job didn't provide any room for growth, that you were laid off due to a mandatory reduction in staff, that they closed their office in your state and required you to relocate, etc. Make sure not to mention anything negative about the people you worked with, the company in general or the job itself.

12. You have a project due in one hour but a more important emergency that affects business needs to be fixed immediately, what do you do?

Focus on the issue that impacts the business most first.

13. How do you prioritize your work?

Depends on the situation... I like to label certain tasks as either A B or C...A being the one that requires immediate attention, and C which are tasks that aren't urgent but eventually need to get done... I like to focus my work As Lathe Operator Metal Machining on the things that need to get done, and done quickly... While balancing the other work alongside our first priorities.

14. How would your boss and co-workers describe you?

First of all, be honest (remember, if you get this job, the hiring manager will be calling your former bosses and co-workers!). Then, try to pull out strengths and traits you haven't discussed in other aspects of the interview As Lathe Operator Metal Machining, such as your strong work ethic or your willingness to pitch in on other projects when needed.

15. Tell me why do you want this job As Lathe Operator Metal Machining?

Bad Answer: No solid answer, answers that don't align with what the job actually offers, or uninspired answers that show your position is just another of the many jobs they're applying for.

Good answer: The candidate has clear reasons for wanting the job that show enthusiasm for the work and the position, and knowledge about the company and job.

16. Describe a time when you anticipated potential problems and developed preventive measures?

The key here is to show that you were proactive. How did you find out about the potential problems? How did you address it quickly?

17. The change in the business industry now requires you to have a new set of skills you have to learn, how do you react to that?

First, find out which skills are the ones that you're currently lacking. Then identify what the steps would be to acquire/build those skills. Then take action to do so.

18. Top 12 Best Brainteaser Interview Questions:

Brainteaser questions As Lathe Operator Metal Machining have become popular for interviews in recent years, as word has gotten out that top tech companies such as Apple, Google, Microsoft and IBM have used this type of question at one time or another.

Companies like Google aren't using these questions so much any more, but many companies, are, and it may be good to prepare for them As Lathe Operator Metal Machining. The key to these isn't so much getting the exact answer, as it is showing how you would come up with an answer.

Here's a sample of 12 of the best and most difficult.

1. How many street lights are there in New York City?

2. How many gas stations are there in the United States?

3. How many golf balls can fit in a school bus?

4. How much should you charge to wash all the windows in Seattle?

5. Why are manhole covers round?

6. How many times a day does a clock's hands overlap?

7. How would you test a calculator?

8. Describe the internet to someone who just woke up from a 30-year coma.

9. How much does the Starbucks in Times Square bring in, in annual revenue?

10. You are shrunk to the height of a nickel and thrown into a blender. Your mass is reduced so that your density is the same as usual. The blades start moving in 60 seconds. What do you do?

11. What is the air speed velocity of an unladen swallow? ;)

12. How many golf balls are there in Florida?

19. How do you propose to compensate for your lack of experience?

The first thing you should do is discuss experience you have the interviewer is unfamiliar with. Once that is detailed, tell the person conducting the interview that you are able to learn new tasks and information in a reasonable period of time and possess a strong work ethic. However, only state this if you can live up to these expectations.

20. Tell me about a problem that you've solved in a unique or unusual way. What was the outcome? Were you happy or satisfied with it?

In this question the interviewer is basically looking for a real life example of how you used creativity to solve a problem.

21. How long do you want to work for us if we hire you?

Here being specific is probably not the best approach. You may consider responding, “I hope a very long time.” Or “As long as we're both happy with my performance.”

22. How well do you perform under pressure?

This is a fair question, as potential employers want to know if you're going to be able to get the job done even when things get a little bit stressful. You may say that you thrive under pressure or that you're able to get the job done even when things get a little bit stressful, just make sure to provide some real world examples of your ability to work under pressure in a prior job.

23. What is the most irritating thing you've experienced about your co-workers?

This question is designed to find out if you get along well on team, with other and whether or not you'll be a fit with the interviewer's organization. It's a trap. Think real hard but fail to come up anything that irritated you about your co-workers. A short positive response is best.

24. Why do you want to join our company?

This is a question that is aimed at finding out whether you know enough about the company and the basic market. The best way to answer this question is to do some research on the company and highlight its positive points.

25. Have you ever been fired and if yes, why?

Answer this as positively as possible and try to avoid disparaging the company you had previously worked for. The key is to accept the fact that yes, you were fired, but you've learned from the mistakes that got you there and you're better now because of it. If you haven't been fired, well, then this question's a piece of cake isn't it?

26. Why are manhole covers round?

This is a classic brainteaser, which was reportedly first asked by a Microsoft interviewer. Here's how to ""solve"" this brainteaser (remember to speak and reason out loud while solving this brainteaser): Why are manhole covers round? Could there be a structural reason? Why aren't manhole covers square? It would make it harder to fit with a cover. You'd have to rotate it exactly the right way.
The pipes below are also round, so fitting them might be easier, as might be making them. So many manhole covers are round because they don't need to be rotated. There are no corners to deal with. Also, a round manhole cover won't fall into a hole because it was rotated the wrong way, so it's safer. Looking at this, it seems corners are a problem. You can't cut yourself on a round manhole cover. And because it's round, it can be more easily transported. One person can roll it.

27. How have you achieved your success?

Discuss stories of how you've progressed over the years to achieve success. People relate best to stories.

28. What do you consider to be your weaknesses?

What your interviewer is really trying to do with this question-beyond identifying any major red flags-is to gauge your self-awareness and honesty. So, “I can't meet a deadline to save my life As Lathe Operator Metal Machining” is not an option-but neither is “Nothing! I'm perfect!” Strike a balance by thinking of something that you struggle with but that you're working to improve. For example, maybe you've never been strong at public speaking, but you've recently volunteered to run meetings to help you be more comfortable when addressing a crowd.

29. How meticulous are you with details?

Being detailed is important for many types of job roles. Typically you want to highlight how you've done that in previous roles. Example: "Being meticulous is important to me. In my last job, I had to count the money in the register as a cashier to make sure it matched to the receipts down to the last penny." This was to ensure there wasn't any "wrongdoing" at the company by any of the cashiers and I was always accurate in my reports.

30. How do you inspire others to be better?

First, the key to inspiring others it to first understand what their goals and objectives are. Once you understand what people want, you can inspire them with a vision that aligns to what they care about. People generally care about having purpose, being successful (and being recognized for it), contributing in a meaningful way, and financial rewards (to a degree) and much more. Then once you understand what people set as goals, you can inspire them through 1:1 pep talks, a presentation to multiple people and so forth.

31. Do you have the ability to articulate a vision and to get others involved to carry it out?

If yes, then share an example of how you've done so at work or college. If not, then discuss how you would do so. Example: "I would first understand the goals of the staff members and then I would align those to the goals of the project / company. Then I would articulate the vision of that alignment and ask them to participate. From there, we would delegate tasks among the team and then follow up on a date and time to ensure follow through on the tasks. Lastly, we would review the results together."

32. Do you like being around people?

People skills are a necessity for medical assistants. When answering this question, be sure to show that you enjoy interacting and working with others and that you also derive great enjoyment from helping others. This will show that you are a team player and that you would be a valuable team member As Lathe Operator Metal Machining.

33. What are three positive characteristics you wish you had?

The key here is to be honest about your wish list but then to describe how you plan on developing or growing those characteristics so that it becomes a reality. For example, I wish I had a stronger work ethic and I am reading a book right now about how to instill a better discipline around getting work done efficiently.

34. Who are your role models? Why?

If possible, cite role models you're truly passionate about - passion is contagious and will show you're being genuine. If the role model is in the same or similar industry as the company in an executive level position, even better.

35. Would you describe yourself as more analytical or interpersonal?

If you answer either, just make sure you explain why. For example, "I would consider myself to be more analytical because I'm good at examining a data set and then understanding how to interpret it in a business environment." or "I'm more of interpersonal person because I enjoy working and collaborating with my teammates and clients"

36. What did you major in and why?

Tell them your major and the motivations behind why you chose it and how it's helped to prep your of this potential job.

37. What are your personal skills which make you a candidate for the position As Lathe Operator Metal Machining?

The list of crucial character traits includes patience, tact, and poise, with personal and cultural sensitivity. One needs the ability to work long hours, with much walking and some physical tasks. But the most important trait of all is to love people and to have the desire to care for them.

38. What's been your biggest success to date?

Talk about a story / experience about how you achieved success and be sure to share details on the results and outcome. Have it highlight a strong characteristic such as leadership, work ethic and so forth.

39. What is your biggest fear?

Don't try to sugarcoat the answer by listing something ambitious as a fear, unless you truly mean it (for example: I fear being a great leader) - Share your real fears but discuss how you would overcome them.

40. What do you know about this company?

Research the company on Google by searching recent news (to remain current on them) and their website. Make sure you understand their products / services, vision, competitive differentiators, and work culture.

41. Where do you see yourself in 5 years with your career?

Be sure to paint a clear picture of your career vision that demonstrates your aspirations and goals that are realistic. This could emphasize increased responsibility, the ability to manage people and so forth

42. How do you imagine a typical day of an employee in our company As Lathe Operator Metal Machining?

Just do not say that you imagine to only walk and watch what people do. Rather try to show them your attention to details and proactive attitude to job. Mention that you would try to observe the problems, weaknesses as well as opportunities to improve the results and take measures according to it.

43. Why are you interested in this type of job As Lathe Operator Metal Machining?

You're looking for someone who enjoys working with the elderly, or a caring, sociable, and nurturing person.

44. What type of extracurricular activities are you a part of?

Discuss the clubs / activities you were in, share a personal story about why you enjoyed it and then describe how it's helped shape you to be who you are today. For example, I enjoyed rock climbing because it taught me the value of practicing hard at a sport to become skilled in it. I bring this same diligence to my work approach today as well.

45. What are your thoughts on social media for this role?

Without a doubt, social media is becoming more and more pervasive in our jobs. You should stress that social media is not appropriate for personal use at work. However, if the company embraces social media in certain departments (for example marketing), then you may want to discuss how you could use it for work (as long as it applies to your role).

46. What do you know about our competition?

Make sure you do your research on their competitors. You can find this by going to yahoo finance and click on their competitors (if they are public). From there research the news on them and go to their websites to understand their positioning on solutions and vision. You can also research local regional companies that are their competition (if it's a smaller private company on a regional scale) by simply typing in similar product offerings in the Google search followed by the city. Make sure you know their competitor's vision, products, culture, and how they are differentiated against their competition (and if they're not, how they could be)

47. Why do you want to work As Lathe Operator Metal Machining for this organisation?

Being unfamiliar with the organisation will spoil your chances with 75% of interviewers, according to one survey, so take this chance to show you have done your preparation and know the company inside and out. You will now have the chance to demonstrate that you've done your research, so reply mentioning all the positive things you have found out about the organisation and its sector etc. This means you'll have an enjoyable work environment and stability of employment etc – everything that brings out the best in you.

48. What's a time you exercised leadership?

Depending on what's more important for the the role, you'll want to choose an example that showcases your project management skills (spearheading a project from end to end, juggling multiple moving parts) or one that shows your ability to confidently and effectively rally a team. And remember: “The best stories include enough detail to be believable and memorable,”. Show how you were a leader in this situation and how it represents your overall leadership experience and potential.

49. What's your salary history?

When you are interviewing for a new job, it is common practice for the company to ask you about your salary history. I typically want to know what the candidate's base salary is, if they receive any bonus, the average bonus amount, and any additional compensation or perks, such as 500k matching, stock grants or stock options, paid time off and how much they are required to pay towards their medical premiums.

50. How much do you expect to get paid As Lathe Operator Metal Machining?

For this be prepared and research salary to find out what similar positions are paying in your area before you go to the interview. Try to find this information out before giving your salary expectations. You can and should provide a range instead of an exact number. But again, don't say any numbers you're not comfortable with because if the employer offers you a salary at the lowest end of your range, you don't have much to negotiate with when it comes to getting a higher salary.

51. How do you act when you encounter competition?

This question is designed to see if you can rise the occasion. You want to discuss how you are the type to battle competition strongly and then you need to cite an example if possible of your past work experience where you were able to do so.

52. How would you motivate your team members to produce the best possible results?

Trying to create competitive atmosphere, trying to motivate the team as a whole, organizing team building activities, building good relationships amongst people.

53. Give me an example of an emergency situation that you faced. How did you handle it?

There was a time when one of my employers faced the quitting of a manager in another country. I was asked to go fill in for him while they found a replacement and stay to train that person. I would be at least 30 days. I quickly accepted because I knew that my department couldn't function without me.

54. What would you like to have accomplished by the end of your career?

Think of 3 major achievements that you'd like to accomplish in your job when all is said and done - and think BIG. You want to show you expect to be a major contributor at the company. It could be creating a revolutionary new product, it could be implementing a new effective way of marketing, etc.

55. What are your salary expectations As Lathe Operator Metal Machining?

This question is like a loaded gun, tricky and dangerous if you're not sure what you are doing. It's not uncommon for people to end up talking salary before really selling their skills, but knowledge is power as this is a negotiation after all. Again, this is an area where doing your research will be helpful as you will have an understanding of average salary.
One approach is asking the interviewer about the salary range, but to avoid the question entirely, you can respond that money isn't a key factor and you're goal is to advance in your career. However, if you have a minimum figure in mind and you believe you're able to get it, you may find it worth trying.

56. Why should the we hire you as this position As Lathe Operator Metal Machining?

This is the part where you link your skills, experience, education and your personality to the job itself. This is why you need to be utterly familiar with the job description as well as the company culture. Remember though, it's best to back them up with actual examples of say, how you are a good team player.

57. What is your desired salary As Lathe Operator Metal Machining?

Bad Answer: Candidates who are unable to answer the question, or give an answer that is far above market. Shows that they have not done research on the market rate, or have unreasonable expectations.

Good answer: A number or range that falls within the market rate and matches their level of mastery of skills required to do the job.

58. How would you observe the level of motivation of your subordinates?

Choosing the right metrics and comparing productivity of everyone on daily basis is a good answer, doesn't matter in which company you apply for a supervisory role.

59. What would your first 30, 60, or 90 days look like in this role As Lathe Operator Metal Machining?

Start by explaining what you'd need to do to get ramped up. What information would you need? What parts of the company would you need to familiarize yourself with? What other employees would you want to sit down with? Next, choose a couple of areas where you think you can make meaningful contributions right away. (e.g., “I think a great starter project would be diving into your email marketing campaigns and setting up a tracking system for them.”) Sure, if you get the job, you (or your new employer) might decide there's a better starting place, but having an answer prepared will show the interviewer where you can add immediate impact-and that you're excited to get started.

60. Explain an idea that you have had and have then implemented in practice?

Often an interview guide will outline the so-called ‘STAR' approach for answering such questions; Structure the answer as a situation, task, action, and result: what the context was, what you needed to achieve, what you did, and what the outcome was as a result of your actions.

61. What do you know about the company?

Any candidate can read and regurgitate the company's “About” page. So, when interviewers ask this, they aren't necessarily trying to gauge whether you understand the mission-they want to know whether you care about it. Start with one line that shows you understand the company's goals, using a couple key words and phrases from the website, but then go on to make it personal. Say, “I'm personally drawn to this mission because…” or “I really believe in this approach because…” and share a personal example or two.

62. Explain me about a time when you reached a goal within a tight deadline?

I work well under pressure to meet deadlines without jeopardizing the quality of my work. I have always worked in a fast pace environment where we are constantly under pressure to achieve best results within a time frame.

63. Do you have good computer skills?

It is becoming increasingly important for medical assistants to be knowledgeable about computers. If you are a long-time computer user with experience with different software applications, mention it. It is also a good idea to mention any other computer skills you have, such as a high typing rate, website creation, and more.

64. How would you define success?

Success is defined differently for everybody. Just make sure the parameters are defined by you with regards to work life balance, financial gain, career growth, achievements, creating meaningful work / products and so forth. If you can clearly articulate what it means to you that is a strong answer.

65. Do you think you have enough experience As Lathe Operator Metal Machining?

If you do not have the experience they need, you need to show the employer that you have the skills, qualities and knowledge that will make you equal to people with experience but not necessary the skills. It is also good to add how quick you can pick up the routine of a new job role.

66. How do you handle stressful situations?

By remaining calm, weighing out all my options and executing a plan to get the situation resolve .

67. Have you got any questions?

This is your final opportunity to persuade the interviewer that you are the right candidate for the job. Now is not the time to ask questions about holidays, pay or pensions – all these things can be asked later when you get an offer of employment. Now is the time to ask about any reservations that the interviewer may have about your suitability for the role. You will then give yourself one last chance to persuade the interviewer that you are the right candidate for the job.
Example Thank you. I think we have covered everything. Before we finish the interview I would like to take the opportunity to ask if you have any reservations about my suitability for this role?

68. Are you planning to continue your studies and training As Lathe Operator Metal Machining?

If asked about plans for continued education, companies typically look for applicants to tie independent goals with the aims of the employer. Interviewers consistently want to see motivation to learn and improve. Continuing education shows such desires, especially when potentials display interests in academia potentially benefiting the company.
Answering in terms of “I plan on continuing my studies in the technology field,” when offered a question from a technology firm makes sense. Tailor answers about continued studies specific to desired job fields. Show interest in the industry and a desire to work long-term in said industry. Keep answers short and to the point, avoiding diatribes causing candidates to appear insincere.

69. Explain me about your experience working in this field As Lathe Operator Metal Machining?

I am dedicated, hardworking and great team player for the common goal of the company I work with. I am fast learner and quickly adopt to fast pace and dynamic area. I am well organized, detail oriented and punctual person.