1. What is your philosophy towards work?

This is typically a straightforward question that merits a straightforward answer. Do you have strong worth ethic? Will you do whatever it takes to make sure the job gets done? Just say so in your response. Keep it short, direct and positive.

2. Explain yourself in one line?

When you respond, keep in mind the type of position you are interviewing for like Machine Cutter Metal Pipes based job, the company culture, and the work environment. Your answer should help show the interviewer why you're a match for the job and for the company.
Sample answers are:
☛ I'm a people person. I really enjoy meeting and working with a lot of different people.
☛ I'm a perfectionist. I pay attention to all the details, and like to be sure that everything is just right.
☛ I'm a creative thinker. I like to explore alternative solutions to problems and have an open mind about what will work best.
☛ I'm efficient and highly organized. This enables me to be as productive as possible on the job.
☛ I enjoy solving problems, troubleshooting issues, and coming up with solutions in a timely manner.

3. Do you have any blind spots?

This question is often meant to trick candidates since acknowledgment of blind spots would indicate they were aware of them. Also, do not disclose bad habits or other personal concerns. Let the interviewer find out about your personal flaws through the course of the interview without directly stating these flaws.

4. What is your biggest weakness As Machine Cutter Metal Pipes?

No one likes to answer this question because it requires a very delicate balance. You simply can't lie and say you don't have one; you can't trick the interviewer by offering up a personal weakness As Machine Cutter Metal Pipes that is really a strength (“Sometimes, I work too much and don't maintain a work-life balance.”); and you shouldn't be so honest that you throw yourself under the bus (“I'm not a morning person so I'm working on getting to the office on time.”)

5. Can you tell me a little about yourself?

This question seems simple, so many people fail to prepare for it, but it's crucial. Here's the deal: Don't give your complete employment (or personal) history As Machine Cutter Metal Pipes. Instead give a pitch-one that's concise and compelling and that shows exactly why you're the right fit for the job. Start off with the 2-3 specific accomplishments or experiences that you most want the interviewer to know about, then wrap up talking about how that prior experience has positioned you for this specific role.

6. Why do you want to leave your current company As Machine Cutter Metal Pipes?

Bad Answer: Complaining about or blaming their former job, boss or colleagues. Also, having no good reason.

Good answer: One that focuses on the positives about why the job they're applying for offers them better learning or career opportunities, chances for advancement, aligns more closely to their long term goals, or is a better fit for them.

7. What position do you prefer on a team working on a project?

Do not claim to be comfortable with a specific role if you in are in fact not comfortable with it. However, if you have no problem working in certain roles or situations, be sure to discuss this with the interviewer.

8. When were you most satisfied in your job As Machine Cutter Metal Pipes?

I'm a people person. I was always happiest and most satisfied when I was interacting with community residents, making sure I was able to meet their needs and giving them the best possible comfort in a tough situation. It was my favorite part of the job, and it showed. Part of the reason I'm interested in this job is that I know I'd have even more interaction with the public, on an even more critical level.

9. What motivates you at the work place?

Keep your answer simple, direct and positive. Some good answers may be the ability to achieve, recognition or challenging assignments.

10. Tell me about the most fun you have had on the job?

When answering this question, discuss situations where you completed tasks benefitting your previous employers.

11. How do you think you might fit this position As Machine Cutter Metal Pipes?

An important part of research before the interview is what the company does and how the job role relates to that. This includes the company philosophy and working methods. Questions such as this seek to find out how a candidate will fit into the organisation As Machine Cutter Metal Pipes. Answer positively; including practical examples of how you anticipate you would perform in the new role.

12. Tell me about a time you failed?

Everyone has failed, so don't play dumb or claim you've never messed up As Machine Cutter Metal Pipes. Think of a time when a work-related situation didn't turn out quite as you had hoped. An interviewer is interested in seeing how you took responsibility for your failure, what you learned from it, and how you would prevent similar failures from happening again.

13. Do you ever take work home with you?

Here are two great sample answers that might help get you started:

☛ I am an extremely organized person, so I tend to be able to get my work done at work. However, if the need arose I would not be against taking work home. I try not to make it a habit, since I do value my free time. I do realize though that the work we do is important, and sometimes you have to do what needs to be done.
☛ I do not shy away from taking work home with me. I know that meeting deadlines and doing outstanding work sometimes means taking a bit of it home. I do not have a problem doing that when the need arises.
☛ Make sure to give an honest answer. Lying about taking work home may turn out badly for you if it is required and you do not do it.

14. Basic 15 Interview Questions that Test Communication Skills As Machine Cutter Metal Pipes:

For most jobs, communication skills As Machine Cutter Metal Pipes are important. It's hard to work as a team if people aren't communicating well.

At some jobs, like customer service or sales, communication skills are an absolute essential.

These questions are meant to help gauge a candidate's ability to communicate.

1. How do you prefer to build rapport with others?

2. How would you go about simplifying a complex issue in order to explain it to a client or colleague?

3. How would you go about persuading someone to see things your way at work?

4. How would you go about explaining a complex idea/problem to a client who was already frustrated?

5. What would you do if you there was a breakdown in communication at work?

6. Talk about a successful presentation you gave and why you think it did well.

7. How would you explain a complicated technical problem to a colleague with less technical understanding?

8. Do you prefer written or verbal communication As Machine Cutter Metal Pipes?

9. Describe a time when you had to be careful talking about sensitive information. How did you do it?

10. What would you do if you misunderstood an important communication on the job?

11. Talk about a time when you made a point that you knew your colleagues would be resistant to.

12. Is it more important to be a good listener or a good communicator As Machine Cutter Metal Pipes?

13. Tell me about a time you had to relay bad news to a client or colleague.

14. Rate your communication skills on a scale of 1 to 10. Give examples of experiences that demonstrate the rating is accurate.

15. How have you handled working under someone you felt was not good at communicating?

15. What makes you right for this position?

This question can be tricky because you need to show your worth As Machine Cutter Metal Pipes without sounding cocky or arrogant. Research the business ahead of time and become familiar with its mission and values. Take the time to figure out how your personal qualities fit the needs of the business and use that fit to provide your answer.

16. Are you able to relocate if required?

Be completely honest and thoughtful with this one. You don't want to wake up one to find out that you're moving to a new city or state and it may be a major factor in your eligibility for employment. But again, if you don't want to move then the job probably isn't for you.

17. Are you good at working in a team As Machine Cutter Metal Pipes?

Before you answer, consider how you best contribute to a team:

☛ Do you get along easily with people?
☛ Are you an effective collaborator?
☛ Can you communicate with people from various backgrounds and with different personalities?
☛ Can you motivate people?
☛ Do you know how to push back tactfully?
☛ Can you mediate conflicts?
☛ Can you deal with difficult personalities?

18. What have you done to improve your knowledge As Machine Cutter Metal Pipes in the last year?

Try to include improvement activities that relate to the job As Machine Cutter Metal Pipes. A wide variety of activities can be mentioned as positive self-improvement. Have some good ones handy to mention.

19. Why do you want this job As Machine Cutter Metal Pipes?

This question typically follows on from the previous one. Here is where your research will come in handy. You may want to say that you want to work for a company that is Global Guideline, (market leader, innovator, provides a vital service, whatever it may be). Put some thought into this beforehand, be specific, and link the company's values and mission statement to your own goals and career plans.

20. What are you looking for in a new position As Machine Cutter Metal Pipes?

I've been honing my skills As Machine Cutter Metal Pipes for a few years now and, first and foremost, I'm looking for a position where I can continue to exercise those skills. Ideally the same things that this position has to offer. Be specific.

21. How did you handle meeting a tight deadline As Machine Cutter Metal Pipes?

Review every deadline you need to meet. Prioritize your projects by deadline and factor in how important each project is. Record your deadlines on a digital calendar or spreadsheet.

22. Would you like doing repetitive work?

Why not, I am not only doing a repetitive work but also earning but also getting a good salary by the company As Machine Cutter Metal Pipes. And second thing is that nothing is interesting in the life till we are not interested.

23. What have you learned from mistakes on the job?

Candidates without specific examples often do not seem credible. However, the example shared should be fairly inconsequential, unintentional, and a learned lesson should be gleaned from it. Moving ahead without group assistance while assigned to a group project meant to be collaborative is a good example.

24. What has disappointed you about a previous job?

Again, this question could get you in trouble so tread carefully. Some good answers might be that your previous job didn't provide any room for growth, that you were laid off due to a mandatory reduction in staff, that they closed their office in your state and required you to relocate, etc. Make sure not to mention anything negative about the people you worked with, the company in general or the job itself.

25. What is it about this position As Machine Cutter Metal Pipes that attracts you the most?

Use your knowledge of the job description to demonstrate how you are a suitable match for the role.

26. Why are you leaving the present company?

According to me we can not grow in the field without taking more responsibilities and risks and also we can't enhance our team leading capabilities, managerial skills without expose to wide range of people.

27. Do you like being around people?

People skills are a necessity for medical assistants. When answering this question, be sure to show that you enjoy interacting and working with others and that you also derive great enjoyment from helping others. This will show that you are a team player and that you would be a valuable team member As Machine Cutter Metal Pipes.

28. How do you imagine a typical day of an employee in our company As Machine Cutter Metal Pipes?

Just do not say that you imagine to only walk and watch what people do. Rather try to show them your attention to details and proactive attitude to job. Mention that you would try to observe the problems, weaknesses as well as opportunities to improve the results and take measures according to it.

29. What do you already know about our company?

Good reputation of a large home grown company that has various departments and product.

30. What is your greatest failure As Machine Cutter Metal Pipes, and what did you learn from it?

When I was in college, I took an art class to supplement my curriculum. I didn't take it very seriously, and assumed that, compared to my Engineering classes, it would be a walk in the park. My failing grades at midterm showed me otherwise. I'd even jeopardized my scholarship status. I knew I had to get my act together. I spent the rest of the semester making up for it, ended up getting a decent grade in the class. I learned that no matter what I'm doing, I should strive to do it to the best of my ability. Otherwise, it's not worth doing at all.

31. How would you describe your approach to Machine Cutter Metal Pipes?

In more general terms, a question such as this gives a candidate the opportunity to talk about their professional philosophy and skills. While the question is general in nature, the best answers are usually quite specific, picking one or two points and exemplifying them with instances from personal history.

32. What can you tell me about team work as part of the job As Machine Cutter Metal Pipes?

There is usually a team of staff nurses working in cooperation with each other. A team of nurses has to get along well and coordinate their actions, usually by dividing their responsibilities into sectors or specific activities. They help each other perform tasks requiring more than one person.

33. Explain a time when you did not get along with your coworker?

I used to lock heads with a fellows. We disagreed over a lot of things – from the care of civilians to who got what shifts to how to speak with a victim's family. Our personalities just didn't mesh. After three months of arguing, I pulled her aside and asked her to lunch. At lunch, we talked about our differences and why we weren't getting along. It turns out, it was all about communication. We communicated differently and once we knew that, we began to work well together. I really believe that talking a problem through with someone can help solve any issue.

34. Why should I hire you As Machine Cutter Metal Pipes?

To close the deal on a job offer, you MUST be prepared with a concise summary of the top reasons to choose you. Even if your interviewer doesn't ask one of these question in so many words, you should have an answer prepared and be looking for ways to communicate your top reasons throughout the interview process.

35. What's a time you disagreed with a decision that was made at work?

Everyone disagrees with the boss from time to time, but in asking this interview question As Machine Cutter Metal Pipes, hiring managers want to know that you can do so in a productive, professional way. “You don't want to tell the story about the time when you disagreed but your boss was being a jerk and you just gave in to keep the peace. And you don't want to tell the one where you realized you were wrong,”. Tell the one where your actions made a positive difference on the outcome of the situation, whether it was a work-related outcome or a more effective and productive working relationship.

36. What do you like to do outside of work?

Interviewers ask personal questions in an interview to “see if candidates will fit in with the culture [and] give them the opportunity to open up and display their personality, too,”. In other words, if someone asks about your hobbies outside of work, it's totally OK to open up and share what really makes you tick. (Do keep it semi-professional, though: Saying you like to have a few beers at the local hot spot on Saturday night is fine. Telling them that Monday is usually a rough day for you because you're always hungover is not.)

37. Did you get on well with your last manager?

A dreaded question for many! When answering this question never give a negative answer. “I did not get on with my manager” or “The management did not run the business well” will show you in a negative light and reduce your chance of a job offer. Answer the question positively, emphasizing that you have been looking for a career progression. Start by telling the interviewer what you gained from your last job As Machine Cutter Metal Pipes

38. Suppose there are three light switches outside a room. Inside is a single light bulb, controlled by one of the three switches. You need to determine which switch operates the bulb. You can turn the switches on and off as many times as you wish (they are all off to begin with), but may only enter the room once. There is no one there to help you. The door to the room is closed, and there are no windows, so you cannot see inside. How can you discover which switch operates the bulb?

Do the following steps:
☛ 1. Turn ON two switches, and leave one OFF.
☛ 2. Wait a few minutes.
☛ 3. Turn one switch from ON to OFF. One is now ON and two are OFF
☛ 4. Enter the room. - If the light is ON, it is controlled by the switch you left ON. - If the light bulb is OFF, touch it. If it is warm it is controlled by the switch you turned ON and OFF. If it is cold, it is controlled by the switch you never turned on.

39. Did the salary we offer attract you to this job?

The interviewer could be asking you this question for a number of reasons. Obviously, the salary is an important factor to your interest in this job, but it should not be the overriding reason for your interest. A good answer to this question is, “The salary was very attractive, but the job itself is what was most attractive to me.”

40. What do you consider to be your weaknesses?

What your interviewer is really trying to do with this question-beyond identifying any major red flags-is to gauge your self-awareness and honesty. So, “I can't meet a deadline to save my life As Machine Cutter Metal Pipes” is not an option-but neither is “Nothing! I'm perfect!” Strike a balance by thinking of something that you struggle with but that you're working to improve. For example, maybe you've never been strong at public speaking, but you've recently volunteered to run meetings to help you be more comfortable when addressing a crowd.

41. If you look at a clock and the time is 3:15, what's the angle between the hour and the minute hands?

Usually, if the answer to a brainteaser seems too easy, chances are the answer's wrong. And in this case, the answer is not zero degrees. The hour hand, remember, moves as well. That is, in addition to the minute hand. And so, at 3:15, the hour hand and the minute hand are not on top of each other. In fact, the hour hand has moved a quarter of the way between the 3 and 4. This means it's moved a quarter of 30 degrees (360 degrees divided by 12 equals 30). So the answer, to be exact, is seven and a half degrees (30 divided by four).

42. What is your greatest strength? How does it help you As Machine Cutter Metal Pipes?

One of my greatest strengths, and that I am a diligent worker... I care about the work getting done.. I am always willing to help others in the team.. Being patient helps me not jump to conclusions... Patience helps me stay calm when I have to work under pressure.. Being a diligent worker.. It ensures that the team has the same goals in accomplishing certain things.

43. How would you be an asset to us As Machine Cutter Metal Pipes?

Think again about the job specification and the skills needed for this role As Machine Cutter Metal Pipes. Have a paragraph prepared highlighting how you will be able to do the job and what you can bring to the team. It goes without saying that this paragraph should be positive.

44. If you have seven white socks and nine black socks in a drawer, how many socks do you have to pull out blindly in order to ensure that you have a matching pair?

if the first one is one color (say, white), and the second one is the other color (black), then the third one, no matter what the color, will make a matching pair. (Sometimes you're not supposed to think that hard.)

45. How many tennis balls can you fit into a limousine? 1,000? 10,000? 100,000? Seriously?

Well, seriously, you might get asked brainteaser questions like these, especially in quantitative jobs. But remember that the interviewer doesn't necessarily want an exact number-he wants to make sure that you understand what's being asked of you, and that you can set into motion a systematic and logical way to respond. So, just take a deep breath, and start thinking through the math. (Yes, it's OK to ask for a pen and paper!)

46. Explain me about a challenge or conflict you've faced at work As Machine Cutter Metal Pipes, and how you dealt with it?

In asking this interview question, your interviewer wants to get a sense of how you will respond to conflict. Anyone can seem nice and pleasant in a job interview, but what will happen if you're hired?. Again, you'll want to use the S-T-A-R method, being sure to focus on how you handled the situation professionally and productively, and ideally closing with a happy ending, like how you came to a resolution or compromise.

47. What are your personal skills which make you a candidate for the position As Machine Cutter Metal Pipes?

The list of crucial character traits includes patience, tact, and poise, with personal and cultural sensitivity. One needs the ability to work long hours, with much walking and some physical tasks. But the most important trait of all is to love people and to have the desire to care for them.

48. Why should we select you not others?

Here you need to give strong reasons to your interviewer to select you not others. Sell yourself to your interviewer in interview in every possible best way. You may say like I think I am really qualified for the position. I am a hard worker and a fast learner, and though I may not have all of the qualifications that you need, I know I can learn the job and do it well.”

49. Do you have any questions for me?

Good interview questions to ask interviewers at the end of the job interview include questions on the company growth or expansion, questions on personal development and training and questions on company values, staff retention and company achievements.

50. Do you have good computer skills?

It is becoming increasingly important for medical assistants to be knowledgeable about computers. If you are a long-time computer user with experience with different software applications, mention it. It is also a good idea to mention any other computer skills you have, such as a high typing rate, website creation, and more.

51. Where do you see yourself professionally five years from now As Machine Cutter Metal Pipes?

Demonstrate both loyalty and ambition in the answer to this question. After sharing your personal ambition, it may be a good time to ask the interviewer if your ambitions match those of the company.

52. How would your friends describe you?

My friends would probably say that I'm extremely persistent – I've never been afraid to keep going back until I get what I want. When I worked as a program developer, recruiting keynote speakers for a major tech conference, I got one rejection after another – this was just the nature of the job. But I really wanted the big players – so I wouldn't take no for an answer. I kept going back to them every time there was a new company on board, or some new value proposition. Eventually, many of them actually said "yes" – the program turned out to be so great that we doubled our attendees from the year before. A lot of people might have given up after the first rejection, but it's just not in my nature. If I know something is possible, I have to keep trying until I get it.

53. Explain me about a time when you reached a goal within a tight deadline?

I work well under pressure to meet deadlines without jeopardizing the quality of my work. I have always worked in a fast pace environment where we are constantly under pressure to achieve best results within a time frame.

54. How would you motivate your team members to produce the best possible results?

Trying to create competitive atmosphere, trying to motivate the team as a whole, organizing team building activities, building good relationships amongst people.

55. What was the most important task you ever had?

There are two common answers to this question that do little to impress recruiters:
☛ ‘I got a 2.1'
☛ ‘I passed my driving test'
No matter how proud you are of these achievements, they don't say anything exciting about you. When you're going for a graduate job, having a degree is hardly going to make you stand out from the crowd and neither is having a driving licence, which is a requirement of many jobs.

56. Why are you leaving your current job?

This is a toughie, but one you can be sure you'll be asked. Definitely keep things positive-you have nothing to gain by being negative about your past employers. Instead, frame things in a way that shows that you're eager to take on new opportunities and that the role you're interviewing for is a better fit for you than your current or last position. For example, “I'd really love to be part of product development from beginning to end, and I know I'd have that opportunity here.” And if you were let go? Keep it simple: “Unfortunately, I was let go,” is a totally OK answer.

57. How do you handle stressful situations?

By remaining calm, weighing out all my options and executing a plan to get the situation resolve .

58. Have you got any questions?

This is your final opportunity to persuade the interviewer that you are the right candidate for the job. Now is not the time to ask questions about holidays, pay or pensions – all these things can be asked later when you get an offer of employment. Now is the time to ask about any reservations that the interviewer may have about your suitability for the role. You will then give yourself one last chance to persuade the interviewer that you are the right candidate for the job.
Example Thank you. I think we have covered everything. Before we finish the interview I would like to take the opportunity to ask if you have any reservations about my suitability for this role?

59. What do you think is your greatest weakness?

Don't say anything that could eliminate you from consideration for the job. For instance, "I'm slow in adapting to change" is not a wise answer, since change is par for the course in most work environments. Avoid calling attention to any weakness that's one of the critical qualities the hiring manager is looking for. And don't try the old "I'm a workaholic," or "I'm a perfectionist.

60. How would you rate your communication and interpersonal skills for this job As Machine Cutter Metal Pipes?

These are important for support workers. But they differ from the communication skills of a CEO or a desktop support technician. Communication must be adapted to the special ways and needs of the clients. Workers must be able to not only understand and help their clients, but must project empathy and be a warm, humane presence in their lives.

61. How do you plan to go by an example for your subordinates?

Sticking to the rules by yourself, working hard and not mind participating on basic tasks is a good answer.

62. How do you evaluate your ability to handle conflict?

I pride myself on being a good problem solver. Through my previous job and management positions I have faced numerous conflicts in different situations, and my experiences have helped me to hone my issue resolution skills. I believe that it is important to get to and address the root of the issue, in a respectable manner.

63. Give me an example of an emergency situation that you faced. How did you handle it?

There was a time when one of my employers faced the quitting of a manager in another country. I was asked to go fill in for him while they found a replacement and stay to train that person. I would be at least 30 days. I quickly accepted because I knew that my department couldn't function without me.

64. How much do you expect to get paid As Machine Cutter Metal Pipes?

For this be prepared and research salary to find out what similar positions are paying in your area before you go to the interview. Try to find this information out before giving your salary expectations. You can and should provide a range instead of an exact number. But again, don't say any numbers you're not comfortable with because if the employer offers you a salary at the lowest end of your range, you don't have much to negotiate with when it comes to getting a higher salary.

65. Why should the we hire you as this position As Machine Cutter Metal Pipes?

This is the part where you link your skills, experience, education and your personality to the job itself. This is why you need to be utterly familiar with the job description as well as the company culture. Remember though, it's best to back them up with actual examples of say, how you are a good team player.

66. What schedule do you hope to work? Are you willing to work extra hours?

Be honest. If you really want the job and are willing to work any schedule needed, say so. If, however, you have no intention of working late hours or weekends, simply let the interviewer know the hours that you are available to work. The same applies to extra hours. You are more likely to be hired if you are willing to work any time you are needed. However, saying that you are willing and then complaining about the hours once you start working is a recipe for disaster.

67. What do you think we could do better or differently?

This is a common one at startups. Hiring managers want to know that you not only have some background on the company, but that you're able to think critically about it and come to the table with new ideas. So, come with new ideas! What new features would you love to see? How could the company increase conversions? How could customer service be improved? You don't need to have the company's four-year strategy figured out, but do share your thoughts, and more importantly, show how your interests and expertise would lend themselves to the job.

68. Describe a typical work week for this position As Machine Cutter Metal Pipes?

Interviewers expect a candidate for employment to discuss what they do while they are working in detail. Before you answer, consider the position As Machine Cutter Metal Pipes you are applying for and how your current or past positions relate to it. The more you can connect your past experience with the job opening, the more successful you will be at answering the questions.

69. Explain an idea that you have had and have then implemented in practice?

Often an interview guide will outline the so-called ‘STAR' approach for answering such questions; Structure the answer as a situation, task, action, and result: what the context was, what you needed to achieve, what you did, and what the outcome was as a result of your actions.

70. Do you like to start personal relationships with other employees?

Well, the right answer is yes and no. Good personal relations can improve the overall performance of a team. But on the other hand, you should not let your emotions to affect your decisions in work.

71. What types of personalities do you work with best?

In the past, I have found it difficult to work with others who see themselves as better than others, who can take criticism, and who refuse to work with others. I have found it challenging to work with them b/c I am a team oriented person who feels the importance of working together over the needs of the individual especially in a learning environment.

72. What type of work environment do you prefer?

Ideally one that's similar to the environment of the company you're applying to. Be specific.