1. Explain yourself in one line?

When you respond, keep in mind the type of position you are interviewing for like Operator Engine Lathe Setup based job, the company culture, and the work environment. Your answer should help show the interviewer why you're a match for the job and for the company.
Sample answers are:
☛ I'm a people person. I really enjoy meeting and working with a lot of different people.
☛ I'm a perfectionist. I pay attention to all the details, and like to be sure that everything is just right.
☛ I'm a creative thinker. I like to explore alternative solutions to problems and have an open mind about what will work best.
☛ I'm efficient and highly organized. This enables me to be as productive as possible on the job.
☛ I enjoy solving problems, troubleshooting issues, and coming up with solutions in a timely manner.

2. How well do you perform under pressure?

This is a fair question, as potential employers want to know if you're going to be able to get the job done even when things get a little bit stressful. You may say that you thrive under pressure or that you're able to get the job done even when things get a little bit stressful, just make sure to provide some real world examples of your ability to work under pressure in a prior job.

3. What is the difference between a big ego and a healthy ego?

"Ego" should be replaced by confidence. It's good to be confident as it shows that you know what you're doing. However, a big ego is when confidence spirals out of control and you become arrogant.

4. Top 13 Situational Interview Questions As Operator Engine Lathe Setup:

Situational interviews As Operator Engine Lathe Setup are similar to behavioral interview questions - but they are focused on the future, and ask hypothetical questions, whereas behavioral interview questions look at the past.

The advantage is that employers can put all candidates in the same hypothetical situations, and compare their answers.


1. What would you do if you made a strong recommendation in a meeting, but your colleagues decided against it?

2. How you would handle it if your team resisted a new idea or policy you introduced?

3. How would you handle it if the priorities for a project you were working on were suddenly changed?

4. What would you do if the work of an employee you managed didn't meet expectations?

5. What would you do if an important task was not up to standard, but the deadline to complete it had passed?

6. What steps would you take to make an important decision on the job As Operator Engine Lathe Setup?

7. How would you handle a colleague you were unable to form a positive relationship with?

8. What would you do if you disagreed with the way a manager wanted you to handle a problem?

9. What would you do if you were assigned to work with a difficult client As Operator Engine Lathe Setup?

10. What would you do if you worked hard on a solution to a problem, and your solution was criticized by your team?

11. How would you handle working closely with a colleague who was very different from you?

12. You're working on a key project that you can't complete, because you're waiting on work from a colleague. What do you do?

13. You realize that an early mistake in a project is going to put you behind deadline. What do you do?

5. How have you made an impact on your team in the past?

I would explain and show to him or her best way possible and if they have a better way then I will encourage him or her to let me know then we can see if it works or not As Operator Engine Lathe Setup.

6. If you were interviewing someone for this position As Operator Engine Lathe Setup, what traits would you look for?

This is where the interviewer tries to turn the tables on you. Answer confidently by stating 3 specific traits that are applicable to that job role. For example, a consulting job would likely look for someone who can think outside of the box.

After answering, ask them, "Am I spot on here and if not, what traits would you look for?"

7. You are not given the tools you need to be successful. How would you change that As Operator Engine Lathe Setup?

State a business case to your manager / leader as to why you need the tools and make the request for them.

8. What have you done to improve yourself in the last year As Operator Engine Lathe Setup?

Discuss how you've improved yourself through work experiences, books you've read, classes, club(s) / extracurricular activities and describe the process on how it's happened. For example: I've improved my presentation skills tremendously because I've had to do 2 presentations this year for my communications class.

9. What have you done to improve your knowledge As Operator Engine Lathe Setup in the last year?

Try to include improvement activities that relate to the job As Operator Engine Lathe Setup. A wide variety of activities can be mentioned as positive self-improvement. Have some good ones handy to mention.

10. What motivates you the most?

Is it money? Is it career development? Is it recognition? Is it a sense of achievement? Is it to impress your peers? Is it for fame?

11. What three character traits would your friends use to describe you?

Friends would typically use attributes like (assuming you have these): Trustworthy, honest, hardworking, friendly, courageous, nice, diligent, organized and so forth. Not saying you have all of these, but the best way for you to find out is to survey your friends by asking them what they consider your brand to be.

12. What did you like least about your last (or current) job As Operator Engine Lathe Setup?

Don't vent or focus on the negative with brutally honest answers such as "My boss was a jerk," or "The company culture was too politically correct," or "They just weren't giving me the opportunity to take my career to the next level." Instead, keep the emphasis on the positive, even though there are sure to be things you weren't happy about.

13. What is your greatest fear?

We all have fears. It's okay to discuss them. Just don't dive too deeply into them. Discuss how you would work to overcome your fears. You don't want to seem weak. You want to acknowledge it's out there but that you'll be able to work through it.

14. What are your weaknesses for Operator Engine Lathe Setup position?

Try not to be too critical when answering this question. Instead, pick one of your weaknesses and try to turn it into a positive.
For example, you could be a perfectionist, which means that you sometimes take longer on tasks, but you make sure that they are completed to a high quality. It is important to make a negative into a positive as it doesn't make you appear overly critical and shows you can reflect on your own performance.

15. What are your strengths As Operator Engine Lathe Setup?

This is one of the most common questions you will be asked. Give an answer relevant to the skills and qualities relevant to the position you are applying to. The interviewer is trying to find if your strengths match the job. For example, if you are applying for a job As Operator Engine Lathe Setup where accuracy is an important issue, one of your strengths could be that you have an eye for detail. It may useful to find different words to describe similar attributes and qualities in order to avoid repetition.

16. If you have multiple projects on your plate, how do you handle completing them on time?

Prioritize based on business importance. Set clear timelines for each so that you know which ones to knock out first. Get your teammates to help if necessary.

17. What would your previous employer say is your greatest strength?

Be prepared for this question. If you have to sit and think about it it's going to appear as if you're not sure or that you've never identified your own value in the work place - not good. You don't have to have a complex response. Keep it simple and honest. For example, several possibilities could be Leadership, Problem solving ability, Initiative, Energy, Work ethic, Innovative, etc., etc.

18. What is your biggest weakness As Operator Engine Lathe Setup?

No one likes to answer this question because it requires a very delicate balance. You simply can't lie and say you don't have one; you can't trick the interviewer by offering up a personal weakness As Operator Engine Lathe Setup that is really a strength (“Sometimes, I work too much and don't maintain a work-life balance.”); and you shouldn't be so honest that you throw yourself under the bus (“I'm not a morning person so I'm working on getting to the office on time.”)

19. Tell me about a time you had to fire a friend?

Hopefully you've never had to do this, but if you did, talk about how hard it was personally to fire anyone but that you did it objectively.

20. What do you know about our company?

You always want to make sure that you're pretty familiar with the company that you're interviewing with. Nothing looks worse than a candidate who knows nothing about the company they say they're interested in working for. Find out everything you can about the company, its culture and its goals. You will also want to know how the company is positioned in its market as well as who its major competitors are.

21. What is your perception of taking on risk?

You answer depends on the type of company you're interviewing for. If it's a start up, you need to be much more open to taking on risk. If it's a more established company, calculated risks to increase / improve the business or minimal risks would typically be more in line.

22. How do you feel about this company's vision?

First find out where the company envisions itself in 3-5 years. If you can't find the vision of the company, that's probably a big question mark on the company itself. Once you do, identify how those company's visions align to your personal values and goals and then articulate how tightly correlated that is to the interviewer. For example - this company wants to be the #1 provider of green technology in the world and I feel strongly about that vision because we've got a chance to collectively impact the world to become a greener society and save our clients at the same time!

23. What's been your biggest success to date?

Talk about a story / experience about how you achieved success and be sure to share details on the results and outcome. Have it highlight a strong characteristic such as leadership, work ethic and so forth.

24. Have you ever been fired and if yes, why?

Answer this as positively as possible and try to avoid disparaging the company you had previously worked for. The key is to accept the fact that yes, you were fired, but you've learned from the mistakes that got you there and you're better now because of it. If you haven't been fired, well, then this question's a piece of cake isn't it?

25. What other jobs are you applying for As Operator Engine Lathe Setup?

If you're applying with other similar companies in a similar or the same industry, it's actually okay to state that as it shows you're valued and wanted.

26. In what areas do you think you will need guidance?

Think about what you need to learn going into the job. Skill sets, industry knowledge, relationship building, team dynamics. Which areas are ones you're lacking?

27. Describe yourself in three words?

Pick three adjectives but then back up each with a real life story that demonstrates those characteristics.

28. Where do you see yourself in 5 years with your career?

Be sure to paint a clear picture of your career vision that demonstrates your aspirations and goals that are realistic. This could emphasize increased responsibility, the ability to manage people and so forth

29. How do you handle repetitive tasks?

Some people enjoy it, others don't. Which are you? If you don't like it, can you at least do it well? And if you don't like it, be ready to explain why in a positive way (i.e. your potential is to do much more than simply be repetitive)

30. How do you imagine a typical day of an employee in our company As Operator Engine Lathe Setup?

Just do not say that you imagine to only walk and watch what people do. Rather try to show them your attention to details and proactive attitude to job. Mention that you would try to observe the problems, weaknesses as well as opportunities to improve the results and take measures according to it.

31. How long do you envision yourself staying with this company?

Understand that companies invest a lot of money into hiring the right staff. You want to emphasize that you are in it for the long run and you want to develop a career there and that it's not just a "5 month stepping stone" type of a job. You should be thinking how you're going to grow with that company. After all, don't you want to invest your energy and time with a company that is going to continue to be successful and one that will help you grow?

32. Describe a time when you've been overwhelmed with work?

Show how you were able to over the "overwhelmed" feeling - by delegating tasks, getting people on your team to help you out, or by prioritizing your work and focusing on the most important issues first As Operator Engine Lathe Setup.

33. Describe to me a time where you had to make a hard decision As Operator Engine Lathe Setup?

Hard decisions are hard for a reason. It could dramatically effect the company. It could affect other workers. So if you have a story about how you made a hard decision and had a good outcome, share that. If you have one where the outcome wasn't great, explain how you would have changed the way you approached the decision to show you learned how to improve.

34. How would you be an asset to us As Operator Engine Lathe Setup?

Think again about the job specification and the skills needed for this role As Operator Engine Lathe Setup. Have a paragraph prepared highlighting how you will be able to do the job and what you can bring to the team. It goes without saying that this paragraph should be positive.

35. Why are manhole covers round?

This is a classic brainteaser, which was reportedly first asked by a Microsoft interviewer. Here's how to ""solve"" this brainteaser (remember to speak and reason out loud while solving this brainteaser): Why are manhole covers round? Could there be a structural reason? Why aren't manhole covers square? It would make it harder to fit with a cover. You'd have to rotate it exactly the right way.
The pipes below are also round, so fitting them might be easier, as might be making them. So many manhole covers are round because they don't need to be rotated. There are no corners to deal with. Also, a round manhole cover won't fall into a hole because it was rotated the wrong way, so it's safer. Looking at this, it seems corners are a problem. You can't cut yourself on a round manhole cover. And because it's round, it can be more easily transported. One person can roll it.

36. Did the salary we offer attract you to this job?

The interviewer could be asking you this question for a number of reasons. Obviously, the salary is an important factor to your interest in this job, but it should not be the overriding reason for your interest. A good answer to this question is, “The salary was very attractive, but the job itself is what was most attractive to me.”

37. What do you consider to be your weaknesses?

What your interviewer is really trying to do with this question-beyond identifying any major red flags-is to gauge your self-awareness and honesty. So, “I can't meet a deadline to save my life As Operator Engine Lathe Setup” is not an option-but neither is “Nothing! I'm perfect!” Strike a balance by thinking of something that you struggle with but that you're working to improve. For example, maybe you've never been strong at public speaking, but you've recently volunteered to run meetings to help you be more comfortable when addressing a crowd.

38. Where do you see yourself in five years As Operator Engine Lathe Setup?

If asked this question, be honest and specific about your future goals, but consider this:
A hiring manager wants to know
☛ a) if you've set realistic expectations for your career,
☛ b) if you have ambition (a.k.a., this interview isn't the first time you're considering the question), and
☛ c) if the position aligns with your goals and growth. Your best bet is to think realistically about where this position could take you and answer along those lines. And if the position isn't necessarily a one-way ticket to your aspirations?
It's OK to say that you're not quite sure what the future holds, but that you see this experience playing an important role in helping you make that decision.

39. How many basketballs would fit in this room?

One. You did not ask what is the maximum number of basketballs you can fit in the room.

40. What can you tell me about team work as part of the job As Operator Engine Lathe Setup?

There is usually a team of staff nurses working in cooperation with each other. A team of nurses has to get along well and coordinate their actions, usually by dividing their responsibilities into sectors or specific activities. They help each other perform tasks requiring more than one person.

41. Do you like to start personal relationships with other employees?

Well, the right answer is yes and no. Good personal relations can improve the overall performance of a team. But on the other hand, you should not let your emotions to affect your decisions in work.

42. Give me an example of an emergency situation that you faced. How did you handle it?

There was a time when one of my employers faced the quitting of a manager in another country. I was asked to go fill in for him while they found a replacement and stay to train that person. I would be at least 30 days. I quickly accepted because I knew that my department couldn't function without me.

43. How would you go about establishing your credibility quickly As Operator Engine Lathe Setup with the team?

Fully understand my responsibilities, work hard and exceed expectations, learn as much as possible, help others as much as possible, understand what my teammates' goals and needs are, be on time, and gain a mentor.

44. Tell me one thing about yourself you wouldn't want me to know?

Talk about a trait that you would consider a weakness. No need to talk about your deepest darkest secrets here.

45. What techniques and tools do you use to keep yourself organized As Operator Engine Lathe Setup?

Utilizing a calendar, having a notebook with your "to do" list, focusing on your top 3 priorities each and every day, utilizing a systematic way of storing documents on your computer (like box.net)

46. How do you ensure all of your work gets accomplished in a productive manner?

The key is to prioritize what's important in your work and to stay organized to accomplish the tasks. A strong work ethic also helps.

47. What do you think we could do better or differently?

This is a common one at startups. Hiring managers want to know that you not only have some background on the company, but that you're able to think critically about it and come to the table with new ideas. So, come with new ideas! What new features would you love to see? How could the company increase conversions? How could customer service be improved? You don't need to have the company's four-year strategy figured out, but do share your thoughts, and more importantly, show how your interests and expertise would lend themselves to the job.

48. What does "thinking outside the box" mean to you?

It means not doing things exactly the same way as everyone else. You've got to challenge the status quo and bring something new to the business.

49. What do you think is your greatest weakness?

Don't say anything that could eliminate you from consideration for the job. For instance, "I'm slow in adapting to change" is not a wise answer, since change is par for the course in most work environments. Avoid calling attention to any weakness that's one of the critical qualities the hiring manager is looking for. And don't try the old "I'm a workaholic," or "I'm a perfectionist.

50. Are you planning to continue your studies and training As Operator Engine Lathe Setup?

If asked about plans for continued education, companies typically look for applicants to tie independent goals with the aims of the employer. Interviewers consistently want to see motivation to learn and improve. Continuing education shows such desires, especially when potentials display interests in academia potentially benefiting the company.
Answering in terms of “I plan on continuing my studies in the technology field,” when offered a question from a technology firm makes sense. Tailor answers about continued studies specific to desired job fields. Show interest in the industry and a desire to work long-term in said industry. Keep answers short and to the point, avoiding diatribes causing candidates to appear insincere.

51. When was the last time something upset you at work? What did you do?

Almost everyone has an emotional moment related to work at some point - you're not alone. The key is to learn why you reacted that way and to focus not on the problem but HOW to resolve it. Another key component is to be aware of your emotional response so that you can learn to control it in the future in a calm way.

52. What do you know about the company?

Any candidate can read and regurgitate the company's “About” page. So, when interviewers ask this, they aren't necessarily trying to gauge whether you understand the mission-they want to know whether you care about it. Start with one line that shows you understand the company's goals, using a couple key words and phrases from the website, but then go on to make it personal. Say, “I'm personally drawn to this mission because…” or “I really believe in this approach because…” and share a personal example or two.

53. What do you look for in terms of culture -- structured or entrepreneurial?

A good answer is to discuss the importance of having both elements in a company As Operator Engine Lathe Setup. Structure is good to maintain a focus on priorities and making sure people are productive but having an entrepreneurial spirit can help cultivate new ideas that can truly help the company.

54. How good are you at problem solving?

Describe the problem first and then discuss how you were able to fix it.

55. What general trends do you see in our industry?

Examine what's happened in the industry in the last 5 - 10 years and how it's evolved and then look at what both the company and analysts are saying about the future of that industry in which that company competes in. Read trade magazines / online sources in that industry as well to make sure you stay up to date on trends.

56. What is your greatest weakness As Operator Engine Lathe Setup? What are you doing to improve it?

I believe my biggest weakness As Operator Engine Lathe Setup is wanting to help anyone I can help. What I mean is I am willing to take on task that are not my job. I want to learn all I can. However, that has helped me get promoted or even asked to help in times of need in other department. I have been know as the "go to person" when help is needed.

57. What would you do if our competitor offered you a position As Operator Engine Lathe Setup?

I would weigh the offer and consider it, however, this company and this role is my first choice.

58. How would you rate your communication and interpersonal skills for this job As Operator Engine Lathe Setup?

These are important for support workers. But they differ from the communication skills of a CEO or a desktop support technician. Communication must be adapted to the special ways and needs of the clients. Workers must be able to not only understand and help their clients, but must project empathy and be a warm, humane presence in their lives.

59. Do you have good computer skills?

It is becoming increasingly important for medical assistants to be knowledgeable about computers. If you are a long-time computer user with experience with different software applications, mention it. It is also a good idea to mention any other computer skills you have, such as a high typing rate, website creation, and more.

60. How would your friends describe you?

My friends would probably say that I'm extremely persistent – I've never been afraid to keep going back until I get what I want. When I worked as a program developer, recruiting keynote speakers for a major tech conference, I got one rejection after another – this was just the nature of the job. But I really wanted the big players – so I wouldn't take no for an answer. I kept going back to them every time there was a new company on board, or some new value proposition. Eventually, many of them actually said "yes" – the program turned out to be so great that we doubled our attendees from the year before. A lot of people might have given up after the first rejection, but it's just not in my nature. If I know something is possible, I have to keep trying until I get it.

61. What kind of salary do you need As Operator Engine Lathe Setup?

This is a loaded question and a nasty little game that you will probably lose if you answer first. So, do not answer it. Instead, say something like, that's a tough question. Can you tell me the range for this position? In most cases, the interviewer, taken off guard, will tell you. If not, say that it can depend on the details of the job. Then give a wide range.

62. Describe to me the position As Operator Engine Lathe Setup you're applying for?

This is a “homework” question, too, but it also gives some clues as to the perspective the person brings to the table. The best preparation you can do is to read the job description and repeat it to yourself in your own words so that you can do this smoothly at the interview.