Fresh Scrap Metal Crusher Primary Metal Processing Interview Questions & Answers:
1. Why are you leaving last job?
Although this would seem like a simple question, it can easily become tricky. You shouldn't mention salary being a factor at this point As Scrap Metal Crusher Primary Metal Processing. If you're currently employed, your response can focus on developing and expanding your career and even yourself. If you're current employer is downsizing, remain positive and brief. If your employer fired you, prepare a solid reason. Under no circumstance should you discuss any drama or negativity, always remain positive.
This would be the first question asked in any interview. Therefore, it is important that you give a proper reply to the question regarding your education. You should have all the documents and certificates pertaining to your education and/or training, although time may not allow the interviewer to review all of them.
3. Why did you leave your last job As Scrap Metal Crusher Primary Metal Processing?
Regardless of why you left your last job make sure to stay positive. Always smile and focus on the positive reason such you were seeking the opportunity to expand your career opportunities, your interest in working with a new firm that provided greater opportunity, you desired to work in a new location, etc. Don't reference previous job problems or differences with management that caused you to leave. If you stay positive, your answer may help you. If you're negative, you will likely decrease your chances of getting the job for which you're interviewing.
4. Why do you think you'll do well at this job?
Provide several reasons including skills, experience and interest. If you can show how you've been successful in a similar career field or job position that will go along way to helping the interviewer believe you'll also be successful at this new job.
5. What would your previous employer say is your greatest strength?
Be prepared for this question. If you have to sit and think about it it's going to appear as if you're not sure or that you've never identified your own value in the work place - not good. You don't have to have a complex response. Keep it simple and honest. For example, several possibilities could be Leadership, Problem solving ability, Initiative, Energy, Work ethic, Innovative, etc., etc.
6. What has been your biggest professional disappointment?
When discussing a professional disappointment, make sure to discuss a scenario you could not control. Be positive about the experience and accept personal responsibility where applicable.
7. Why do you want this job As Scrap Metal Crusher Primary Metal Processing?
This question typically follows on from the previous one. Here is where your research will come in handy. You may want to say that you want to work for a company that is Global Guideline, (market leader, innovator, provides a vital service, whatever it may be). Put some thought into this beforehand, be specific, and link the company's values and mission statement to your own goals and career plans.
8. How long do you want to work for us if we hire you?
Here being specific is probably not the best approach. You may consider responding, “I hope a very long time.” Or “As long as we're both happy with my performance.”
9. Do you have any blind spots?
This question is often meant to trick candidates since acknowledgment of blind spots would indicate they were aware of them. Also, do not disclose bad habits or other personal concerns. Let the interviewer find out about your personal flaws through the course of the interview without directly stating these flaws.
Try to include improvement activities that relate to the job As Scrap Metal Crusher Primary Metal Processing. A wide variety of activities can be mentioned as positive self-improvement. Have some good ones handy to mention.
11. How would your boss and co-workers describe you?
First of all, be honest (remember, if you get this job, the hiring manager will be calling your former bosses and co-workers!). Then, try to pull out strengths and traits you haven't discussed in other aspects of the interview As Scrap Metal Crusher Primary Metal Processing, such as your strong work ethic or your willingness to pitch in on other projects when needed.
12. How do you think you might fit this position As Scrap Metal Crusher Primary Metal Processing?
An important part of research before the interview is what the company does and how the job role relates to that. This includes the company philosophy and working methods. Questions such as this seek to find out how a candidate will fit into the organisation As Scrap Metal Crusher Primary Metal Processing. Answer positively; including practical examples of how you anticipate you would perform in the new role.
There are some questions that your potential employer aren't allowed to ask (but trust me, they probably want to). For instance, they shouldn't really ask about your family or how far away you live from your potential place of employment. If you can find a way to answer these questions anyway (with the answers they want to hear), that will give them a little added info to help them make the (right) decision!
14. How did you handle meeting a tight deadline As Scrap Metal Crusher Primary Metal Processing?
Review every deadline you need to meet. Prioritize your projects by deadline and factor in how important each project is. Record your deadlines on a digital calendar or spreadsheet.
Be very thoughtful about your answer. This is a very serious matter for most companies and requires a very serious answer. You need to express that you will do it when it is the right thing to do but you don't want to give the impression that you're callus to the process. Don't forget that firing is not the same as laying someone off - it typically is for the direct benefit of the company.
You'll want to be prepare with some very specific examples of what you've done over the last year and what you're currently doing to improve your professional knowledge and skill set as well as anything else you're doing the shows self improvement.
17. What type of people do you not work well with?
Be very careful answering this question as most organization employ professionals with an array of personalities and characteristics. You don't want to give the impression that you're going to have problems working with anyone currently employed at the organization. If you through out anything trivial you're going to look like a whiner. Only disloyalty to the organization or lawbreaking should be on your list of personal characteristics of people you can't work with.
18. What do you think about Teamwork?
I enjoy teamwork and am used to shift work. I think I would adapt well to the role. I am looking for new challenges As Scrap Metal Crusher Primary Metal Processing and I know I would learn a lot as cabin crew, not just about people and places, but skills like first aid too, how can I help others with in my limits.
19. Do you consider yourself successful?
You should always answer yes to this question. Briefly explain why without going on and on. If you communicate that you're more successful than you really are you may come off as arrogant or unrealistic. A goof explanation is that you have set professional goals and that you have met some of these goals and are on track to meet more in the near future.
20. What is your greatest professional achievement?
Nothing says “hire me” better than a track record of achieving amazing results in past jobs As Scrap Metal Crusher Primary Metal Processing, so don't be shy when answering this interview question! A great way to do so is by using the S-T-A-R method: Set up the situation and the task that you were required to complete to provide the interviewer with background context (e.g., “In my last job as a Scrap Metal Crusher Primary Metal Processing, it was my role to manage the invoicing process”), but spend the bulk of your time describing what you actually did (the action) and what you achieved (the result). For example, “In one month, I streamlined the process, which saved my group 10 man-hours each month and reduced errors on invoices by 25%.”
21. Are you willing to work overtime or odd hours?
Be completely honest. You don't want to lie to get the job if you're not going to work the hours required.
22. When were you most satisfied in your job As Scrap Metal Crusher Primary Metal Processing?
I'm a people person. I was always happiest and most satisfied when I was interacting with community residents, making sure I was able to meet their needs and giving them the best possible comfort in a tough situation. It was my favorite part of the job, and it showed. Part of the reason I'm interested in this job is that I know I'd have even more interaction with the public, on an even more critical level.
23. Are you able to relocate if required?
Be completely honest and thoughtful with this one. You don't want to wake up one to find out that you're moving to a new city or state and it may be a major factor in your eligibility for employment. But again, if you don't want to move then the job probably isn't for you.
No matter your previous job experience or educational background, be sure to tell the interviewer you have the knowledge and skills to successfully execute the job responsibilities.
25. What have you learned from mistakes on the job?
Candidates without specific examples often do not seem credible. However, the example shared should be fairly inconsequential, unintentional, and a learned lesson should be gleaned from it. Moving ahead without group assistance while assigned to a group project meant to be collaborative is a good example.
One of employees was conflicting with other and colleague who was prove his was wrong hi denied and was invite union to defend him but we have prove his wrong and I was facing disciplinary action.
When I was in college, I took an art class to supplement my curriculum. I didn't take it very seriously, and assumed that, compared to my Engineering classes, it would be a walk in the park. My failing grades at midterm showed me otherwise. I'd even jeopardized my scholarship status. I knew I had to get my act together. I spent the rest of the semester making up for it, ended up getting a decent grade in the class. I learned that no matter what I'm doing, I should strive to do it to the best of my ability. Otherwise, it's not worth doing at all.
28. How many tennis balls can you fit into a limousine? 1,000? 10,000? 100,000? Seriously?
Well, seriously, you might get asked brainteaser questions like these, especially in quantitative jobs. But remember that the interviewer doesn't necessarily want an exact number-he wants to make sure that you understand what's being asked of you, and that you can set into motion a systematic and logical way to respond. So, just take a deep breath, and start thinking through the math. (Yes, it's OK to ask for a pen and paper!)
Do the following steps:
☛ 1. Turn ON two switches, and leave one OFF.
☛ 2. Wait a few minutes.
☛ 3. Turn one switch from ON to OFF. One is now ON and two are OFF
☛ 4. Enter the room. - If the light is ON, it is controlled by the switch you left ON. - If the light bulb is OFF, touch it. If it is warm it is controlled by the switch you turned ON and OFF. If it is cold, it is controlled by the switch you never turned on.
Use your knowledge of the job description to demonstrate how you are a suitable match for the role.
https://InterviewQuestionsAnswers.ORG.