Top Extruding Department Supervisor Interview Questions & Answers:

1. If you were interviewing someone for this position As Extruding Department Supervisor, what traits would you look for?

This is where the interviewer tries to turn the tables on you. Answer confidently by stating 3 specific traits that are applicable to that job role. For example, a consulting job would likely look for someone who can think outside of the box.

After answering, ask them, "Am I spot on here and if not, what traits would you look for?"

2. Do you work well within a team?

Some people are thrown when they are asked this Extruding Department Supervisor question when they are applying for a position to work alone. Every company works as a team, so you are a good team player, give an example of when you have worked well within a team.

3. Top 12 Stress Based Interview Questions As Extruding Department Supervisor:

Some jobs require employees to work under stress, and some interviewers just like to see how applicants handle stressful questions.

There are many questions designed for putting the interviewee into an awkward situation, or throwing them off, to see how they do under stress. Here are some samples.

1. How do you feel this interview is going As Extruding Department Supervisor?

2. How would you handle undeserved criticism from a superior?

3. How many other jobs are you applying for?

4. What would you do if you saw a colleague stealing supplies or equipment?

5. What did you do when you had a boss you didn't get along with?

6. What would you do if a colleague took credit for your idea, and got a promotion?

7. Was the stress of your previous job too much for you?

8. What would you do if a colleague admitted to lying on their resume to get the job?

9. What would you do if a customer verbally insulted you in front of co-workers?

10. What would you change about the design of a baseball hat?

11. Why were you fired from your previous job As Extruding Department Supervisor?

12. How successful do you think you've been so far?

4. Tell us about a typical day at work. How does it start? What do you do?

At the beginning of each day, I inspect the work site to make sure that it is hazard-free. Once the work site is secured, I verify that all tools and equipment are adequate in supply. As soon as the work orders are delivered, I provide workers with security guidelines and carry out drills. During the workday, it is my duty to monitor workers to ensure that they are working according to the enforced safety policies and that any problems or accidents are quickly addressed.

5. Why did you select the University _______?

Discuss the academic program, the extracurricular program(s), the school spirit, the quality of your peers, and the professors.

6. What is the most irritating thing you've experienced about your co-workers?

This question is designed to find out if you get along well on team, with other and whether or not you'll be a fit with the interviewer's organization. It's a trap. Think real hard but fail to come up anything that irritated you about your co-workers. A short positive response is best.

7. If you felt like you were hitting the proverbial "wall" and getting burned out, what would you do to re-energize yourself?

Take a break to rest. Work in smaller increments of time to increase focus with breaks in between. Delegate tasks to those that are willing to help.

8. How well do you know our company?

Well, a developed company that is gradually building their reputation in the competitive world.

9. Tell me about yourself?

There are some questions that your potential employer aren't allowed to ask (but trust me, they probably want to). For instance, they shouldn't really ask about your family or how far away you live from your potential place of employment. If you can find a way to answer these questions anyway (with the answers they want to hear), that will give them a little added info to help them make the (right) decision!

10. Where do you see your career in five years As Extruding Department Supervisor?

I would like to retire from this company. I would like to make a difference in the company whether in the company or any other position or area of the company As Extruding Department Supervisor.

11. Why did you leave your last job As Extruding Department Supervisor?

Regardless of why you left your last job make sure to stay positive. Always smile and focus on the positive reason such you were seeking the opportunity to expand your career opportunities, your interest in working with a new firm that provided greater opportunity, you desired to work in a new location, etc. Don't reference previous job problems or differences with management that caused you to leave. If you stay positive, your answer may help you. If you're negative, you will likely decrease your chances of getting the job for which you're interviewing.

12. What critical component of this position As Extruding Department Supervisor makes the work challenging?

Heading information: This should include job title, pay grade or range, reporting relationship (by position, not individual), hours or shifts, and the likelihood of overtime or weekend work.
Summary objective of the job: List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees.
Qualifications: State the education, experience, training, and technical skills necessary for entry into this job.
Special demands: This should include any extraordinary conditions applicable to the job As Extruding Department Supervisor (for example, heavy lifting, exposure to temperature extremes, prolonged standing, or travel).
Job duties and responsibilities: Only two features of job responsibility are important: identifying tasks that comprise about 90 to 95 percent of the work done and listing tasks in order of the time consumed (or, sometimes, in order of importance).

13. If the company you worked for was doing something unethical or illegal, what would you do?

Report it to the leaders within the company. True leaders understand business ethics are important to the company's longevity

14. What is your philosophy towards work?

This is typically a straightforward question that merits a straightforward answer. Do you have strong worth ethic? Will you do whatever it takes to make sure the job gets done? Just say so in your response. Keep it short, direct and positive.

15. Top 11 Questions to Verify Experience and Credentials As Extruding Department Supervisor:

Sometimes people want a job a little too bad - and they may fudge their credentials and experience a bit.

If you've run into this problem, are worried about it, or have credentials and experience that are absolutely essential, you may need to ask a few verification questions.

If you are a candidate, you should review your resume and make sure you know all the key points, and that nothing has been misconstrued.


1. What grades did you get in college?

2. What were your responsibilities when you worked in job x?

3. How many people were on your team at your last job?

4. What will your previous manager/supervisor say when I ask where you needed to improve?

5. What was your beginning and ending salary at job x?

6. What were your beginning and ending titles at job x?

7. Are you eligible for rehire at job x?

8. What tools are necessary for performing job x?

9. Describe to me how you would perform [x typical job task].

10. What was the focus of your thesis?

11. When did you leave company x?

16. What type of salary are you looking for?

This can be a very tricky question as the individual asking it is probably digging for something other than a simple answer to the question. We recommend that you don't immediately respond to the question directly. Instead, say something like, “That a difficult question. What is range for this position?” More often than not the interviewer will tell you. If the interviewer insists on direct answer you may want say that it depends on the details of the job - then give a wide salary range.

17. If you could do it all over again, how would you plan your academic studies differently?

Whatever you do, just don't act bitter. A lot of times we wish we could change the past, but focus on the positive reasons and results of the decisions you already made.

18. What's your management style?

The best managers are strong but flexible, and that's exactly what you want to show off in your answer. (Think something like, “While every situation and every team member requires a bit of a different strategy, I tend to approach my employee relationships as a coach...”) Then, share a couple of your best managerial moments, like when you grew your team from five to 15 or coached an underperforming employee to become the company's top employee.

19. Tell me about a time when you had to make a decision without all the information you needed. How did you handle it As Extruding Department Supervisor? Why? Were you happy with the outcome?

In many scenarios, you will not have all the information needed. The key is to make the best possible decision based on what you deem to be a sufficient amount of information.

20. How do you propose to compensate for your lack of experience?

The first thing you should do is discuss experience you have the interviewer is unfamiliar with. Once that is detailed, tell the person conducting the interview that you are able to learn new tasks and information in a reasonable period of time and possess a strong work ethic. However, only state this if you can live up to these expectations.

21. Give me an example of a time when you were able to successfully communicate with another person even when that individual may not have personally liked you (or vice versa). How did you handle the situation? What obstacles or difficulties did you face? How did you deal with them?

First, the key is to state the differences in personality to give the interviewer some background. Second, you want to discuss how that was affecting the situation. Third, show how you were able to adapt to the way the person wanted to be communicated with to achieve your goals

22. If you have multiple projects on your plate, how do you handle completing them on time?

Prioritize based on business importance. Set clear timelines for each so that you know which ones to knock out first. Get your teammates to help if necessary.

23. Why are you interested in working As Extruding Department Supervisor for [insert company name here]?

Bad Answer: They don't have a good reason, or provide a generic answer, "I think it represents a great opportunity."

Good answer: One that shows they've done research on the company, and are truly excited about specific things they can do at the job. This not only shows enthusiasm for the work and basic preparation skills, gives you clues about the cultural fit.

24. Would you like doing repetitive work?

Why not, I am not only doing a repetitive work but also earning but also getting a good salary by the company As Extruding Department Supervisor. And second thing is that nothing is interesting in the life till we are not interested.

25. How would you estimate the weight of the Chrysler building?

This is a process guesstimate where the interviewer wants to know if you know what to ask. First, you would find out the dimensions of the building (height, weight, depth). This will allow you to determine the volume of the building. Does it taper at the top? (Yes.) Then, you need to estimate the composition of the Chrysler building. Is it mostly steel? Concrete? How much would those components weigh per square inch? Remember the extra step: find out whether you're considering the building totally empty or with office furniture, people, etc. If you're including the contents, you might have to add 20 percent or so to the building's weight.

26. What motivates you to succeed?

Your interviewer will likely want to know the reasons why you will remain motivated to do your best during your employment with the company As Extruding Department Supervisor. Perhaps you are interested in being challenged, but you may also have interest in being recognized for your hard work in the form of the number of sales you can attain. A great example answer for this question is “I always do my best in everything, including my job. I take pride in my success, and I also want the company for which I work to be successful. Being affiliated with a company that is known for its excellence is very important to me.”

27. How do you prioritize your work initiatives As Extruding Department Supervisor?

Discuss how you prioritize your work initiatives based on the company initiatives. For example, if you're in customer service discuss how you're focused on providing the best customer experience.

28. What do you consider to be your weaknesses?

What your interviewer is really trying to do with this question-beyond identifying any major red flags-is to gauge your self-awareness and honesty. So, “I can't meet a deadline to save my life As Extruding Department Supervisor” is not an option-but neither is “Nothing! I'm perfect!” Strike a balance by thinking of something that you struggle with but that you're working to improve. For example, maybe you've never been strong at public speaking, but you've recently volunteered to run meetings to help you be more comfortable when addressing a crowd.

29. What makes you a good manager?

Describe how you manage people, time, money and energy in the most effective manner to achieve the best return of that investment.

30. Describe a time when you've been overwhelmed with work?

Show how you were able to over the "overwhelmed" feeling - by delegating tasks, getting people on your team to help you out, or by prioritizing your work and focusing on the most important issues first As Extruding Department Supervisor.