1. Top 11 Questions to Verify Experience and Credentials Regarding Non Destructive Testing Under Water Welder (NDT U-:

Sometimes people want a job a little too bad - and they may fudge their credentials and experience a bit.

If you've run into this problem, are worried about it, or have credentials and experience that are absolutely essential, you may need to ask a few verification questions.

If you are a candidate, you should review your resume and make sure you know all the key points, and that nothing has been misconstrued.


1. What grades did you get in college?

2. What were your responsibilities when you worked in job x?

3. How many people were on your team at your last job?

4. What will your previous manager/supervisor say when I ask where you needed to improve?

5. What was your beginning and ending salary at job x?

6. What were your beginning and ending titles at job x?

7. Are you eligible for rehire at job x?

8. What tools are necessary for performing job x?

9. Describe to me how you would perform [x typical job task].

10. What was the focus of your thesis?

11. When did you leave company x?

2. What is the most irritating thing you've experienced about your co-workers?

This question is designed to find out if you get along well on team, with other and whether or not you'll be a fit with the interviewer's organization. It's a trap. Think real hard but fail to come up anything that irritated you about your co-workers. A short positive response is best.

3. How do you adapt to new working environments Regarding Non Destructive Testing Under Water Welder (NDT U-?

It's important that you demonstrate that you can adapt to changing environments quickly. You want to stress that you can manage change. The one thing in life that is constant after all, is change.

4. What is your typical way of dealing with conflict? Give me an example?

First, find out what the root of the problem is. Second, determine the best steps to remediation with the best possible outcome. Third, take action to put remediation plans in place.

5. Give me an example of how you handled pressure at work Regarding Non Destructive Testing Under Water Welder (NDT U-?

The company is looking to see if you can handle pressure well. Share with them an example where you were able to stay calm during a pressure filled situation (perhaps it was a deadline, or there was an emergency with a customer occurring). Discuss the situation, your reaction and steps you took to resolve it and the outcome.

6. Do you have any blind spots?

This question is often meant to trick candidates since acknowledgment of blind spots would indicate they were aware of them. Also, do not disclose bad habits or other personal concerns. Let the interviewer find out about your personal flaws through the course of the interview without directly stating these flaws.

7. Do you know anyone working with this organization?

It would be great if you did - then you could potentially use them as a referral if they thought highly of you.

8. What position do you prefer on a team working on a project?

Do not claim to be comfortable with a specific role if you in are in fact not comfortable with it. However, if you have no problem working in certain roles or situations, be sure to discuss this with the interviewer.

9. What do you consider ethical spending on an expense account?

It depends on the role - but the better way to answer this is to ask the interviewer what their expectations are with regards to what the role can expense and then simply state that you'll stay within those parameters

10. Your client is upset with you for a mistake you made, how do you react?

Acknowledge their pain - empathize with them. Then apologize and offer a solution to fix the mistake.

11. What have you done to improve your skills over the past year Regarding Non Destructive Testing Under Water Welder (NDT U-?

You'll want to be prepare with some very specific examples of what you've done over the last year and what you're currently doing to improve your professional knowledge and skill set as well as anything else you're doing the shows self improvement.

12. Do you know anyone that works with our company?

Sometimes companies have policies relating to the hiring of individuals related to current company employees. If you are related to anyone working for the company make sure you're aware of company policies before you enter the interview. If you have a friend or acquaintance working for the company make sure have good relationship with this individual before mentioning them.

13. If you were given more initiatives than you could handle, what would you do?

First prioritize the important activities that impact the business most. Then discuss the issue of having too many initiatives with the boss so that it can be offloaded. Work harder to get the initiatives done.

14. What is more important to you money or success?

First ask yourself that question before the interview - what are your priorities? Are money and success actual one in the same goal for you? If not, what's more important based on how do you define success?

15. Top 11 Interview Questions to Ask when Emotional Intelligence Matters Regarding Non Destructive Testing Under Water Welder (NDT U-:

Emotional intelligence, or EQ, has come into vogue as a good trait to hire for.

EQ is the ability to use emotional information to guide thinking and behavior, to recognize other people's emotions and your own, and to discriminate between different feelings and label them appropriately.

EQ is considered essential to help teams function well. Here are some of the top questions for help you get an idea of how candidates perceive their emotions and those of others.

1. If you started a company today, what would its top values be?

2. Who inspires you? Why?

3. How could you create more balance in your life?

4. What makes you angry?

5. How do you have fun?

6. How good are you at asking for help?

7. How did you deal with a bad day?

8. What's something you're really proud of? Why?

9. Tell me about a time when your mood altered your performance (positively or negatively).

10. Has there ever been a time when you felt you needed to change your behavior at work? How did you do it?

11. Did you create friendships that lasted while working at a previous job?

16. What do you think about Teamwork?

I enjoy teamwork and am used to shift work. I think I would adapt well to the role. I am looking for new challenges Regarding Non Destructive Testing Under Water Welder (NDT U- and I know I would learn a lot as cabin crew, not just about people and places, but skills like first aid too, how can I help others with in my limits.

17. What kind of car do you drive?

The only time this might matter is if the job requires a certain type of car because of the responsibilities. For example, if you need to load a lot of construction materials into your car, you'll probably need a truck.

18. How well do you perform under pressure?

This is a fair question, as potential employers want to know if you're going to be able to get the job done even when things get a little bit stressful. You may say that you thrive under pressure or that you're able to get the job done even when things get a little bit stressful, just make sure to provide some real world examples of your ability to work under pressure in a prior job.

19. What are the goals you've set for yourself?

You could discuss your goals with regards to these categories: Career goals, impact you want to leave on society, financial goals, academic goals, charitable goals.

20. Are you willing to work overtime or odd hours?

Be completely honest. You don't want to lie to get the job if you're not going to work the hours required.

21. If you were an animal, which one would you want to be?

Seemingly random personality-test type questions like these come up in interviews generally because hiring managers want to see how you can think on your feet. There's no wrong answer here, but you'll immediately gain bonus points if your answer helps you share your strengths or personality or connect with the hiring manager. Pro tip: Come up with a stalling tactic to buy yourself some thinking time, such as saying, “Now, that is a great question. I think I would have to say… ”

22. How many tennis balls can you fit into a limousine? 1,000? 10,000? 100,000? Seriously?

Well, seriously, you might get asked brainteaser questions like these, especially in quantitative jobs. But remember that the interviewer doesn't necessarily want an exact number-he wants to make sure that you understand what's being asked of you, and that you can set into motion a systematic and logical way to respond. So, just take a deep breath, and start thinking through the math. (Yes, it's OK to ask for a pen and paper!)

23. What do you think of your previous boss?

Do not belittle or talk badly of your last boss - it will come off as being petty. Instead, talk about the positive lessons you were able to learn from your last boss.

24. What other companies are you interviewing at?

Be open and share if you are indeed interviewing elsewhere, but do it in a humble way. This way you don't seem arrogant and the interviewer knows your skills are valued by other companies. This also tends to make them want you more as they know they are competing for your services.

25. How would your former employer describe you?

In all likelihood, the interviewer will actually speak with your former employer so honesty is key. Answer as confidently and positively as possible and list all of the positive things your past employer would recognize about you. Do not make the mistake of simply saying you are responsible, organized, and dependable. Instead, include traits that are directly related to your work as a medical assistant, such as the ability to handle stressful situations and difficult patients, the way you kept meticulous records, and more.

26. What qualities do you believe are important to have as a manager?

Great managers tend to empower their employees to be successful through strong coaching. They understand how to manage relationships - this is commonly referred to emotional intelligence. They have to be able to handle both client and staff situations that require them to be calm under pressure to clearly think of solutions to complex problems. Most importantly they must be able to articulate the vision to the team and inspire them to work together to collectively achieve that goal

27. How do you take "No" for an answer?

You want to be persistent enough to understand why someone is saying no so that you could potentially convince them otherwise with a sound reason. However, if they are still saying "no" to you, then you need to humbly accept their position and move on.

28. If hired, how do you intend on making a difference with our company?

Dedicate myself to learn everything about the new company that I can, look for ways and ideas that could improve, processes, safety, removing obstacles from the associates, I want to advance within the company.

29. How would you estimate the weight of the Chrysler building?

This is a process guesstimate where the interviewer wants to know if you know what to ask. First, you would find out the dimensions of the building (height, weight, depth). This will allow you to determine the volume of the building. Does it taper at the top? (Yes.) Then, you need to estimate the composition of the Chrysler building. Is it mostly steel? Concrete? How much would those components weigh per square inch? Remember the extra step: find out whether you're considering the building totally empty or with office furniture, people, etc. If you're including the contents, you might have to add 20 percent or so to the building's weight.

30. What do you aspire to be?

Discuss your aspirations for the near, immediate and long term. You want to show them you are thinking of making an impact now as well as the future.

31. Where do you see yourself in 5 years with your career?

Be sure to paint a clear picture of your career vision that demonstrates your aspirations and goals that are realistic. This could emphasize increased responsibility, the ability to manage people and so forth

32. Do you value recognition or pay more? Why?

Either preference is fine, but just remember you have to be able to explain why. If you say recognition, then back that up by describing how achievement really carries weight with you and how you like to feel valued in the work that you do because it validates that you're helping your teammates / customers and so forth. If you choose money, you can also explain that is important to you as validation and you can highlight how money is important to you because of your goals (financial security, providing for your family, and so forth). The key is to be authentic with your answer. However, if you say you value pay more because you're greedy - know that doesn't align usually to most company's values/vision.

33. Why were you fired?

OK, if you get the admittedly much tougher follow-up question as to why you were let go (and the truth isn't exactly pretty), your best bet is to be honest (the job-seeking world is small, after all). But it doesn't have to be a deal-breaker. Share how you've grown and how you approach your job and life now as a result. If you can position the learning experience as an advantage for this next job, even better.

34. How would you feel about working for someone who knows less than you Regarding Non Destructive Testing Under Water Welder (NDT U-?

The reality is, the majority of the time someone is in a management/leadership position is because of their experience and past success. So they probably possess at least a unique set of knowledge from you. So you'll want to learn from them as much as possible. If it's not the case, then discuss how you would look for mentors in different departments to help your personal career development.

35. What differentiates you from the competition?

Think about what you bring to the table that you truly believe is unique - the easiest way to do is to think of your own personal stories that demonstrate your work ethic, skills, and dedication. Most people have some or all of those skills, but the unique stories are what make people stand out in interviews.

36. What do you feel you deserve to be paid?

Do your research before answering this question - first, consider what the market average is for this job. You can find that by searching on Google (title followed by salary) and globalguideline.com and other websites. Then, consider this - based on your work experience and previous results, are you above average, if yes, by what % increase from your pay today from your perspective? Also - make sure if you aim high you can back it up with facts and your previous results so that you can make a strong case.

37. Describe what a bad work environment would look like to you Regarding Non Destructive Testing Under Water Welder (NDT U-?

There could be a multitude of things to discuss here: Business ethics (wrongdoing), inconsiderate teammates, non-supportive management, a product that does not do what you're promising customers and so forth.

38. What is your perception of taking on risk?

You answer depends on the type of company you're interviewing for. If it's a start up, you need to be much more open to taking on risk. If it's a more established company, calculated risks to increase / improve the business or minimal risks would typically be more in line.

39. What is your biggest fear?

Don't try to sugarcoat the answer by listing something ambitious as a fear, unless you truly mean it (for example: I fear being a great leader) - Share your real fears but discuss how you would overcome them.

40. How will you approach learning this "new" job Regarding Non Destructive Testing Under Water Welder (NDT U-?

Interview peers and leaders/managers, read industry news, practice the skill sets needed, absorb information on the job as much as possible.

41. If I were to give you this salary you requested but let you write your job description for the next year, what would it say?

It should say the same thing - after all - if you think this salary is fair then it should suit the responsibilities!

42. What's the least rewarding work you've ever done and why?

Describe work you've done that you feel doesn't take advantage of your full potential. For example, "I once had to make paper copies for my job and I feel it didn't take full advantage of my skills. However, it did teach me to be humble in my work and to appreciate a good opportunity when it arose to use my skills"

43. Explain an idea that you have had and have then implemented in practice?

Often an interview guide will outline the so-called ‘STAR' approach for answering such questions; Structure the answer as a situation, task, action, and result: what the context was, what you needed to achieve, what you did, and what the outcome was as a result of your actions.

44. What do you look for in terms of culture -- structured or entrepreneurial?

A good answer is to discuss the importance of having both elements in a company Regarding Non Destructive Testing Under Water Welder (NDT U-. Structure is good to maintain a focus on priorities and making sure people are productive but having an entrepreneurial spirit can help cultivate new ideas that can truly help the company.

45. What kind of salary do you need Regarding Non Destructive Testing Under Water Welder (NDT U-?

This is a loaded question and a nasty little game that you will probably lose if you answer first. So, do not answer it. Instead, say something like, that's a tough question. Can you tell me the range for this position? In most cases, the interviewer, taken off guard, will tell you. If not, say that it can depend on the details of the job. Then give a wide range.

46. How good are you at problem solving?

Describe the problem first and then discuss how you were able to fix it.

47. What features of your previous jobs have you disliked?

It's easy to talk about what you liked about your job in an interview, but you need to be careful when responding to questions about the downsides of your last position. When you're asked at a job interview about what you didn't like about your previous job, try not to be too negative. You don't want the interviewer to think that you'll speak negatively about this job or the company should you eventually decide to move on after they have hired you.

48. What do you expect to be earning in 5 years Regarding Non Destructive Testing Under Water Welder (NDT U-?

Discuss how you expect yourself to be excellent at your job. Thus, it would be reasonable to expect pay that is based on the merit of your work.

49. Tell me one thing about yourself you wouldn't want me to know?

Talk about a trait that you would consider a weakness. No need to talk about your deepest darkest secrets here.

50. How much do you expect to get paid Regarding Non Destructive Testing Under Water Welder (NDT U-?

For this be prepared and research salary to find out what similar positions are paying in your area before you go to the interview. Try to find this information out before giving your salary expectations. You can and should provide a range instead of an exact number. But again, don't say any numbers you're not comfortable with because if the employer offers you a salary at the lowest end of your range, you don't have much to negotiate with when it comes to getting a higher salary.

51. Have you got any questions?

This is your final opportunity to persuade the interviewer that you are the right candidate for the job. Now is not the time to ask questions about holidays, pay or pensions – all these things can be asked later when you get an offer of employment. Now is the time to ask about any reservations that the interviewer may have about your suitability for the role. You will then give yourself one last chance to persuade the interviewer that you are the right candidate for the job.
Example Thank you. I think we have covered everything. Before we finish the interview I would like to take the opportunity to ask if you have any reservations about my suitability for this role?

52. Rate yourself on a scale of 10?

If you truly believe you're a 10, you better be able to explain why with examples / stories. If you believe you're a great contributor and have room to grow, say 8 or 9. If you're below that, explain what you would do to improve yourself to get the ranking you believe you can be.

53. What was the biggest professional risk you have taken and what was the outcome?

First discuss how you weighed the pros and cons of the risk and the results you'd believe you could achieve. Then discuss the action plan you put into place for it and outline that step by step. Then discuss the outcome and if it wasn't optimal talk about what you would do differently in hindsight.

54. What types of personalities do you work with best?

In the past, I have found it difficult to work with others who see themselves as better than others, who can take criticism, and who refuse to work with others. I have found it challenging to work with them b/c I am a team oriented person who feels the importance of working together over the needs of the individual especially in a learning environment.

55. How long will it take for you to make a significant contribution?

First define significant contribution - once you do that - lay out a timeline plan in which you think you can achieve that.

56. How would you define success?

Success is defined differently for everybody. Just make sure the parameters are defined by you with regards to work life balance, financial gain, career growth, achievements, creating meaningful work / products and so forth. If you can clearly articulate what it means to you that is a strong answer.

57. Do you have any questions for me?

Good interview questions to ask interviewers at the end of the job interview include questions on the company growth or expansion, questions on personal development and training and questions on company values, staff retention and company achievements.

58. What general trends do you see in our industry?

Examine what's happened in the industry in the last 5 - 10 years and how it's evolved and then look at what both the company and analysts are saying about the future of that industry in which that company competes in. Read trade magazines / online sources in that industry as well to make sure you stay up to date on trends.

59. If you had to choose one, would you consider yourself a big-picture person or a detail-oriented person?

Both are important. You need to stress that. However, if you could only choose one, ask yourself Regarding Non Destructive Testing Under Water Welder (NDT U- - do you like to be "in the weeds" with your work, or do you want to be the one painting the vision?

60. How would you rate your communication and interpersonal skills for this job Regarding Non Destructive Testing Under Water Welder (NDT U-?

These are important for support workers. But they differ from the communication skills of a CEO or a desktop support technician. Communication must be adapted to the special ways and needs of the clients. Workers must be able to not only understand and help their clients, but must project empathy and be a warm, humane presence in their lives.

61. What techniques and tools do you use to keep yourself organized Regarding Non Destructive Testing Under Water Welder (NDT U-?

Utilizing a calendar, having a notebook with your "to do" list, focusing on your top 3 priorities each and every day, utilizing a systematic way of storing documents on your computer (like box.net)

62. What do you know about this department?

One good way to find out about the department is to try to "informally" interview the existing employees over coffee (outside of the office) if possible. It's hard if you don't have any connections there, but if you do a great way to learn about it. Other than that, it's often hard to learn about the department so you can turn the table back on them by asking questions to learn about it.