1. What are the goals you've set for yourself?
You could discuss your goals with regards to these categories: Career goals, impact you want to leave on society, financial goals, academic goals, charitable goals.
2. How did you become interested in this field/industry?
Describe how you've come to develop a passion or interest in this industry and use variables like "culture, people, vision, career development, and the work itself" to define your choice
3. Why do you want to work for this company?
Again be honest. The interviewer will be able to sense very quickly if you're be disingenuous. Your answer should be base on your person reasons, career aspirations as well as research you've performed on the company. The most important thing you should do is make sure to relate your answer to your long-term career goals.
4. How well do you know our company?
Well, a developed company that is gradually building their reputation in the competitive world.
Have at least one person you consider a hero or role model. Be ready to explain why they are a hero to you and how they've inspired you to be a better person.
6. Are you willing to work in shifts?
If the job calls for shifts that vary, be ready to do that for your work. If you aren't open to that, then explain why and see if they can adjust it for you.
7. How do you think your colleagues at your last job would describe you?
While your CV will say a lot about your work history As Cutter Stock Woodworking, the interviewer will most likely look for greater detail with questions such as this. Be positive about previous experience, highlighting your own strengths.
8. Describe a time when you anticipated potential problems and developed preventive measures?
The key here is to show that you were proactive. How did you find out about the potential problems? How did you address it quickly?
9. Why do you think you'll do well at this job?
Provide several reasons including skills, experience and interest. If you can show how you've been successful in a similar career field or job position that will go along way to helping the interviewer believe you'll also be successful at this new job.
10. Top 11 Questions to Verify Experience and Credentials As Cutter Stock Woodworking:
Sometimes people want a job a little too bad - and they may fudge their credentials and experience a bit.
If you've run into this problem, are worried about it, or have credentials and experience that are absolutely essential, you may need to ask a few verification questions.
If you are a candidate, you should review your resume and make sure you know all the key points, and that nothing has been misconstrued.
1. What grades did you get in college?
2. What were your responsibilities when you worked in job x?
3. How many people were on your team at your last job?
4. What will your previous manager/supervisor say when I ask where you needed to improve?
5. What was your beginning and ending salary at job x?
6. What were your beginning and ending titles at job x?
7. Are you eligible for rehire at job x?
8. What tools are necessary for performing job x?
9. Describe to me how you would perform [x typical job task].
10. What was the focus of your thesis?
11. When did you leave company x?
11. What can you offer us that someone else can not?
Bad Answer: Going negative - if the candidate starts trash talking other candidates, it's a sure sign of a bad attitude. Also, if they can't provide a solid answer, it may show that they lack thorough knowledge of the skills the job requires, and an understanding of where they fit in.
Good answer: The candidate can name specific skills, abilities or understandings they have that apply directly to the job that other candidates are unlikely to have, or are in short supply.
12. What do you consider ethical spending on an expense account?
It depends on the role - but the better way to answer this is to ask the interviewer what their expectations are with regards to what the role can expense and then simply state that you'll stay within those parameters
13. Are you currently looking at other job opportunities?
Just answer this question honestly. Sometime an employer wants to know if there are other companies you're considering so that they can determine how serious you are about the industry, they're company and find out if you're in demand. Don't spend a lot of time on this question; just try to stay focused on the job you're interviewing for.
14. What do you ultimately want to become?
Do you want to be an entry level worker As Cutter Stock Woodworking? Do you want to be a leader? Do you want to be an entrepreneur? Do you want to be a philanthropist? Do you want to be in middle management? Ask yourself these questions to figure it out.
15. What did you like least about your last (or current) job As Cutter Stock Woodworking?
Don't vent or focus on the negative with brutally honest answers such as "My boss was a jerk," or "The company culture was too politically correct," or "They just weren't giving me the opportunity to take my career to the next level." Instead, keep the emphasis on the positive, even though there are sure to be things you weren't happy about.
16. You notice there are too many non productive internal meetings being held, what do you do?
Reach out to your boss and let him know that first you value his leadership and organization but that you are being overwhelmed with the amount of non productive internal meetings.
17. What have you done to improve your skills over the past year As Cutter Stock Woodworking?
You'll want to be prepare with some very specific examples of what you've done over the last year and what you're currently doing to improve your professional knowledge and skill set as well as anything else you're doing the shows self improvement.
18. Do you work well within a team?
Some people are thrown when they are asked this Cutter Stock Woodworking question when they are applying for a position to work alone. Every company works as a team, so you are a good team player, give an example of when you have worked well within a team.
19. What motivates you the most?
Is it money? Is it career development? Is it recognition? Is it a sense of achievement? Is it to impress your peers? Is it for fame?
20. What is your philosophy towards work?
This is typically a straightforward question that merits a straightforward answer. Do you have strong worth ethic? Will you do whatever it takes to make sure the job gets done? Just say so in your response. Keep it short, direct and positive.
21. Tell me a difficult situation you have overcome in the workplace?
Conflict resolution, problem solving, communication and coping under pressure are transferable skills desired by many employers As Cutter Stock Woodworking.
Answering this question right can help you demonstrate all of these traits.
☛ Use real-life examples from your previous roles that you are comfortable explaining
☛ Choose an example that demonstrates the role you played in resolving the situation clearly
☛ Remain professional at all times – you need to demonstrate that you can keep a cool head and know how to communicate with people
22. What will your ramp time be before you become a meaningful contributor?
Companies want staff that can ramp quickly, but also want people who are realistic. So take into consideration how intense the job is and then give a good answer. For example, if you have simple responsibilities that don't require a huge development curve, then your ramp time will probably be shorter. If it's a complex set of skills that you need to develop, then your ramp time could be longer - the key is you have to explain why you believe that ramp time should be.
23. What do you feel you deserve to be paid?
Do your research before answering this question - first, consider what the market average is for this job. You can find that by searching on Google (title followed by salary) and globalguideline.com and other websites. Then, consider this - based on your work experience and previous results, are you above average, if yes, by what % increase from your pay today from your perspective? Also - make sure if you aim high you can back it up with facts and your previous results so that you can make a strong case.
24. Tell me about a time when you were held accountable for a problem that you hadn't caused?
If someone puts the blame on you (incorrectly), the best thing you can do is NOT to retaliate. You want to make it known that you were not to blame (explain all the facts) and then focus on fixing the problem in the best way possible.
25. What other companies are you interviewing with?
Companies ask this for a number of reasons, from wanting to see what the competition is for you to sniffing out whether you're serious about the industry. “Often the best approach is to mention that you are exploring a number of other similar options in the company's industry,”. It can be helpful to mention that a common characteristic of all the jobs you are applying to is the opportunity to apply some critical abilities and skills that you possess. For example, you might say 'I am applying for several positions with IT consulting firms where I can analyze client needs and translate them to development teams in order to find solutions to technology problems.'
26. How do you feel about technology at the workplace in general?
It's a great enabler for us to collaborate better as a team, for us to reach customers more efficiently and frequently and I believe it can help any company become more efficient, leaner, and more productive.
27. What classes did you enjoy most in college and why?
Think back to the classes that either resonated with your passion or truly helped you to develop skills that you believe will help you in your career. Talk about those.
28. How many basketballs would fit in this room?
One. You did not ask what is the maximum number of basketballs you can fit in the room.
29. How do you handle repetitive tasks?
Some people enjoy it, others don't. Which are you? If you don't like it, can you at least do it well? And if you don't like it, be ready to explain why in a positive way (i.e. your potential is to do much more than simply be repetitive)
30. What is it about this position As Cutter Stock Woodworking that attracts you the most?
Use your knowledge of the job description to demonstrate how you are a suitable match for the role.
31. What do you think of your previous boss?
Do not belittle or talk badly of your last boss - it will come off as being petty. Instead, talk about the positive lessons you were able to learn from your last boss.
Discuss your aspirations for the near, immediate and long term. You want to show them you are thinking of making an impact now as well as the future.
33. How do you handle conflicts with people you supervise?
At first place, you try to avoid conflicts if you can. But once it happens and there's no way to avoid it, you try to understand the point of view of the other person and find the solution good for everyone. But you always keep the authority of your position.
34. How will you approach learning this "new" job As Cutter Stock Woodworking?
Interview peers and leaders/managers, read industry news, practice the skill sets needed, absorb information on the job as much as possible.
35. Do you value recognition or pay more? Why?
Either preference is fine, but just remember you have to be able to explain why. If you say recognition, then back that up by describing how achievement really carries weight with you and how you like to feel valued in the work that you do because it validates that you're helping your teammates / customers and so forth. If you choose money, you can also explain that is important to you as validation and you can highlight how money is important to you because of your goals (financial security, providing for your family, and so forth). The key is to be authentic with your answer. However, if you say you value pay more because you're greedy - know that doesn't align usually to most company's values/vision.
36. Describe a time where you've failed and bounced back?
Share a story to describe this. For example: "I accidentally made the mistake of telling a customer I could deliver on a solution set on a certain date and then later found out our business partner couldn't do it on that time. I learned that I shouldn't rush into important decisions and promises like this and that I should always check with my counterparts first before committing to a statement of work."
37. What are your lifelong dreams?
If your dreams don't relate to the job closely, make sure you highlight aspects of the job that will help develop the skills that will help you with your dreams. Ideally, you want your dreams to relate strongly to the career path you're interviewing for though.
The key is that you openly communicate your thoughts to your supervisor to explain your position and try to come to a mutual decision together. Also be sure to listen to his/her thoughts so that you can potentially compromise. When you're pressed for a decision, make sure you've put thought into the reasons as to how you arrived at it and then decisively make it.
39. What other jobs are you applying for As Cutter Stock Woodworking?
If you're applying with other similar companies in a similar or the same industry, it's actually okay to state that as it shows you're valued and wanted.
40. What do you already know about our company?
Good reputation of a large home grown company that has various departments and product.
41. How do you feel about taking no for an answer?
It's good to be persistent, but not overbearing. Everyone will face rejection at some point in their life, so at some point you'll have to take no for an answer but then learn why you were turned down.
42. What are your presentation skills like As Cutter Stock Woodworking?
Make sure you share a story that demonstrates your presentation skills in front of many people. If you are really brave, offer to give a snippet of that presentation to the interviewer. This will definitely be different from what most people do.
43. How do you ensure all of your work gets accomplished in a productive manner?
The key is to prioritize what's important in your work and to stay organized to accomplish the tasks. A strong work ethic also helps.
44. What problems have you encountered at work?
Wow, do we have problems! Where do I begin? Well, most of the problems are internal, just people not working well with each other. I have one person on our team who is a real problem, but it seems like management is afraid to do anything about it. So we all end up having to do extra work to cover for this person, who just doesn't work. We all say that he's retired in place. I think he's just holding on until retirement in a couple years. But he's a real problem. I complain about it--a lot--but nothing ever seems to get done. I've even written negative reviews about the person, hoping he will get canned, but it doesn't happen. I can't wait for him to retire.
Show that you were communicative with that person and that you were able to collaborate effectively in sharing ideas and work tasks. They want to see that you can be a team player.
46. What is your greatest weakness As Cutter Stock Woodworking? What are you doing to improve it?
I believe my biggest weakness As Cutter Stock Woodworking is wanting to help anyone I can help. What I mean is I am willing to take on task that are not my job. I want to learn all I can. However, that has helped me get promoted or even asked to help in times of need in other department. I have been know as the "go to person" when help is needed.
47. What would your first 30, 60, or 90 days look like in this role As Cutter Stock Woodworking?
Start by explaining what you'd need to do to get ramped up. What information would you need? What parts of the company would you need to familiarize yourself with? What other employees would you want to sit down with? Next, choose a couple of areas where you think you can make meaningful contributions right away. (e.g., “I think a great starter project would be diving into your email marketing campaigns and setting up a tracking system for them.”) Sure, if you get the job, you (or your new employer) might decide there's a better starting place, but having an answer prepared will show the interviewer where you can add immediate impact-and that you're excited to get started.
48. Explain an idea that you have had and have then implemented in practice?
Often an interview guide will outline the so-called ‘STAR' approach for answering such questions; Structure the answer as a situation, task, action, and result: what the context was, what you needed to achieve, what you did, and what the outcome was as a result of your actions.
49. When was the last time something upset you at work? What did you do?
Almost everyone has an emotional moment related to work at some point - you're not alone. The key is to learn why you reacted that way and to focus not on the problem but HOW to resolve it. Another key component is to be aware of your emotional response so that you can learn to control it in the future in a calm way.
50. Give me an example of when you competed hard and won?
You can reference many different areas here when discussing a story of where you won in competition: Work experience (ideal), sports, clubs, classes, projects.
51. What techniques and tools do you use to keep yourself organized As Cutter Stock Woodworking?
Utilizing a calendar, having a notebook with your "to do" list, focusing on your top 3 priorities each and every day, utilizing a systematic way of storing documents on your computer (like box.net)
52. Do you have good computer skills?
It is becoming increasingly important for medical assistants to be knowledgeable about computers. If you are a long-time computer user with experience with different software applications, mention it. It is also a good idea to mention any other computer skills you have, such as a high typing rate, website creation, and more.
53. How do you plan to go by an example for your subordinates?
Sticking to the rules by yourself, working hard and not mind participating on basic tasks is a good answer.
54. Rate yourself on a scale of 10?
If you truly believe you're a 10, you better be able to explain why with examples / stories. If you believe you're a great contributor and have room to grow, say 8 or 9. If you're below that, explain what you would do to improve yourself to get the ranking you believe you can be.
55. What type of work environment do you prefer?
Ideally one that's similar to the environment of the company you're applying to. Be specific.
56. What do you expect to be earning in 5 years As Cutter Stock Woodworking?
Discuss how you expect yourself to be excellent at your job. Thus, it would be reasonable to expect pay that is based on the merit of your work.
57. What is your biggest achievement?
Quality work to be is about doing work to the require or set standard, which is very important when it comes to warehouse operations.
58. Do you work well under pressure?
Yes.. When it comes down to the wire, the best thing I can to remain focused, have some flexibility, and understand priorities.. Giving them attention in the order they are needed.
59. How good are you at problem solving?
Describe the problem first and then discuss how you were able to fix it.
60. How do you decide what to delegate and to whom?
Identify the strengths of your team members and their availability based on the priorities they have on their plate. From there, invest the tasks upon each member based on where you think you'll get the best return.
61. How do you act when you encounter competition?
This question is designed to see if you can rise the occasion. You want to discuss how you are the type to battle competition strongly and then you need to cite an example if possible of your past work experience where you were able to do so.
Fully understand my responsibilities, work hard and exceed expectations, learn as much as possible, help others as much as possible, understand what my teammates' goals and needs are, be on time, and gain a mentor.
63. What's the least rewarding work you've ever done and why?
Describe work you've done that you feel doesn't take advantage of your full potential. For example, "I once had to make paper copies for my job and I feel it didn't take full advantage of my skills. However, it did teach me to be humble in my work and to appreciate a good opportunity when it arose to use my skills"
64. What's your salary history?
When you are interviewing for a new job, it is common practice for the company to ask you about your salary history. I typically want to know what the candidate's base salary is, if they receive any bonus, the average bonus amount, and any additional compensation or perks, such as 500k matching, stock grants or stock options, paid time off and how much they are required to pay towards their medical premiums.
