1. What has disappointed you about a previous job?

Again, this question could get you in trouble so tread carefully. Some good answers might be that your previous job didn't provide any room for growth, that you were laid off due to a mandatory reduction in staff, that they closed their office in your state and required you to relocate, etc. Make sure not to mention anything negative about the people you worked with, the company in general or the job itself.

2. Top 12 Stress Based Interview Questions As Pre-Assembly Printed Circuit Board Component Teste:

Some jobs require employees to work under stress, and some interviewers just like to see how applicants handle stressful questions.

There are many questions designed for putting the interviewee into an awkward situation, or throwing them off, to see how they do under stress. Here are some samples.

1. How do you feel this interview is going As Pre-Assembly Printed Circuit Board Component Teste?

2. How would you handle undeserved criticism from a superior?

3. How many other jobs are you applying for?

4. What would you do if you saw a colleague stealing supplies or equipment?

5. What did you do when you had a boss you didn't get along with?

6. What would you do if a colleague took credit for your idea, and got a promotion?

7. Was the stress of your previous job too much for you?

8. What would you do if a colleague admitted to lying on their resume to get the job?

9. What would you do if a customer verbally insulted you in front of co-workers?

10. What would you change about the design of a baseball hat?

11. Why were you fired from your previous job As Pre-Assembly Printed Circuit Board Component Teste?

12. How successful do you think you've been so far?

3. What do you know about our company?

You always want to make sure that you're pretty familiar with the company that you're interviewing with. Nothing looks worse than a candidate who knows nothing about the company they say they're interested in working for. Find out everything you can about the company, its culture and its goals. You will also want to know how the company is positioned in its market as well as who its major competitors are.

4. How would your boss and co-workers describe you?

First of all, be honest (remember, if you get this job, the hiring manager will be calling your former bosses and co-workers!). Then, try to pull out strengths and traits you haven't discussed in other aspects of the interview As Pre-Assembly Printed Circuit Board Component Teste, such as your strong work ethic or your willingness to pitch in on other projects when needed.

5. What is your philosophy towards work?

This is typically a straightforward question that merits a straightforward answer. Do you have strong worth ethic? Will you do whatever it takes to make sure the job gets done? Just say so in your response. Keep it short, direct and positive.

6. Are you able to relocate if required?

Be completely honest and thoughtful with this one. You don't want to wake up one to find out that you're moving to a new city or state and it may be a major factor in your eligibility for employment. But again, if you don't want to move then the job probably isn't for you.

7. If you were hiring a person for this job As Pre-Assembly Printed Circuit Board Component Teste, what would you look for?

Discuss qualities you possess required to successfully complete the job duties.

8. What are you looking for in a new position As Pre-Assembly Printed Circuit Board Component Teste?

I've been honing my skills As Pre-Assembly Printed Circuit Board Component Teste for a few years now and, first and foremost, I'm looking for a position where I can continue to exercise those skills. Ideally the same things that this position has to offer. Be specific.

9. What are your greatest professional strengths As Pre-Assembly Printed Circuit Board Component Teste?

When answering this question, we recommends being accurate (share your true strengths, not those you think the interviewer wants to hear); relevant (choose your strengths that are most targeted to this particular position As Pre-Assembly Printed Circuit Board Component Teste); and specific (for example, instead of “people skills,” choose “persuasive communication” or “relationship building”). Then, follow up with an example of how you've demonstrated these traits in a professional setting.

10. Why did you leave your last job As Pre-Assembly Printed Circuit Board Component Teste?

Regardless of why you left your last job make sure to stay positive. Always smile and focus on the positive reason such you were seeking the opportunity to expand your career opportunities, your interest in working with a new firm that provided greater opportunity, you desired to work in a new location, etc. Don't reference previous job problems or differences with management that caused you to leave. If you stay positive, your answer may help you. If you're negative, you will likely decrease your chances of getting the job for which you're interviewing.

11. Tell us about a typical day at work. How does it start? What do you do?

At the beginning of each day, I inspect the work site to make sure that it is hazard-free. Once the work site is secured, I verify that all tools and equipment are adequate in supply. As soon as the work orders are delivered, I provide workers with security guidelines and carry out drills. During the workday, it is my duty to monitor workers to ensure that they are working according to the enforced safety policies and that any problems or accidents are quickly addressed.

12. If you were interviewing someone for this position As Pre-Assembly Printed Circuit Board Component Teste, what traits would you look for?

This is where the interviewer tries to turn the tables on you. Answer confidently by stating 3 specific traits that are applicable to that job role. For example, a consulting job would likely look for someone who can think outside of the box.

After answering, ask them, "Am I spot on here and if not, what traits would you look for?"

13. Explain me what do you know about our company?

Bad Answer: They don't know much about the company. If a candidate is serious and enthusiastic, they should have done some basic research.

Good answer: An answer that shows they've really done their homework and know what the company does, any important current events that involve the company, and the work culture.

14. What are your strengths As Pre-Assembly Printed Circuit Board Component Teste?

This is one of the most common questions you will be asked. Give an answer relevant to the skills and qualities relevant to the position you are applying to. The interviewer is trying to find if your strengths match the job. For example, if you are applying for a job As Pre-Assembly Printed Circuit Board Component Teste where accuracy is an important issue, one of your strengths could be that you have an eye for detail. It may useful to find different words to describe similar attributes and qualities in order to avoid repetition.

15. Tell me about a time when you were forced to make an unpopular decision?

Not every decision is popular. In fact, almost every decision is bound to make someone unhappy at some point. The key is to demonstrate how it impacted others positively and why you chose it.

16. If you have multiple projects on your plate, how do you handle completing them on time?

Prioritize based on business importance. Set clear timelines for each so that you know which ones to knock out first. Get your teammates to help if necessary.

17. Tell me about a time when you had to give someone difficult feedback As Pre-Assembly Printed Circuit Board Component Teste?

By asking this question, your interviewer hopes to learn whether you can communicate effectively, address issues in the workplace and motivate others during difficult times. Giving negative feedback requires honesty, thoughtfulness and tact. Answering this question well can help show an interviewer that you would be a good fit for a managerial position or a position that involves working closely with others.

18. If you felt like you were hitting the proverbial "wall" and getting burned out, what would you do to re-energize yourself?

Take a break to rest. Work in smaller increments of time to increase focus with breaks in between. Delegate tasks to those that are willing to help.

19. Tell me about a time when you had to use your presentation skills to influence someone's opinion As Pre-Assembly Printed Circuit Board Component Teste?

Example stories could be a class project, an internal meeting presentation, or a customer facing presentation.

20. Think about the changes you have seen and tell me how you handle change?

You can cite personal life changes, work place changes, career changes, technology change, industry change. The key is to discuss how seeing or experiencing that change has helped your development. For example, the recent changes in social media has broadened my horizons and helped me learn new forms of efficient marketing.

21. What is your typical way of dealing with conflict? Give me an example?

First, find out what the root of the problem is. Second, determine the best steps to remediation with the best possible outcome. Third, take action to put remediation plans in place.

22. What kind of car do you drive?

The only time this might matter is if the job requires a certain type of car because of the responsibilities. For example, if you need to load a lot of construction materials into your car, you'll probably need a truck.

23. How do you handle repetitive tasks?

Some people enjoy it, others don't. Which are you? If you don't like it, can you at least do it well? And if you don't like it, be ready to explain why in a positive way (i.e. your potential is to do much more than simply be repetitive)

24. If you have seven white socks and nine black socks in a drawer, how many socks do you have to pull out blindly in order to ensure that you have a matching pair?

if the first one is one color (say, white), and the second one is the other color (black), then the third one, no matter what the color, will make a matching pair. (Sometimes you're not supposed to think that hard.)

25. How do you feel about taking no for an answer?

It's good to be persistent, but not overbearing. Everyone will face rejection at some point in their life, so at some point you'll have to take no for an answer but then learn why you were turned down.

26. How long do you envision yourself staying with this company?

Understand that companies invest a lot of money into hiring the right staff. You want to emphasize that you are in it for the long run and you want to develop a career there and that it's not just a "5 month stepping stone" type of a job. You should be thinking how you're going to grow with that company. After all, don't you want to invest your energy and time with a company that is going to continue to be successful and one that will help you grow?

27. How do you continue learning on a daily basis? Why is continuous improvement necessary As Pre-Assembly Printed Circuit Board Component Teste?

You can learn on the job, through books and magazines, through social networks, blogs, seminars, mentors and so on. Continuous improvement is important because the one thing in life that is constant is change. And you have to continue to push yourself day in and day out to be the best.

28. How do you feel about this company's vision?

First find out where the company envisions itself in 3-5 years. If you can't find the vision of the company, that's probably a big question mark on the company itself. Once you do, identify how those company's visions align to your personal values and goals and then articulate how tightly correlated that is to the interviewer. For example - this company wants to be the #1 provider of green technology in the world and I feel strongly about that vision because we've got a chance to collectively impact the world to become a greener society and save our clients at the same time!

29. Can you perform Internet research? Please describe to me your steps in doing so?

Internet research can entail Google searches, industry sites, news articles, social networks and company websites.

30. Give me a few examples of how you're results oriented?

Make you give an example where you discuss details and metrics. For example, I was a tutor in my last job and mentored 5 students on their SAT test taking skills and raised their scores by 15% on average after a 3 month teaching stint.

31. How do you imagine a typical day of an employee in our company As Pre-Assembly Printed Circuit Board Component Teste?

Just do not say that you imagine to only walk and watch what people do. Rather try to show them your attention to details and proactive attitude to job. Mention that you would try to observe the problems, weaknesses as well as opportunities to improve the results and take measures according to it.

32. How do you feel about taking on repetitive tasks As Pre-Assembly Printed Circuit Board Component Teste?

This answer depends on whether or not the job has a lot of repetitive tasks with no variation. If it does, then you would need to be okay with the idea of doing the same task over and over again. If you feel you can offer more than repetitive work, then describe how you would be able to do so.

33. What do you know about this company?

Research the company on Google by searching recent news (to remain current on them) and their website. Make sure you understand their products / services, vision, competitive differentiators, and work culture.

34. Explain me about a challenge or conflict you've faced at work As Pre-Assembly Printed Circuit Board Component Teste, and how you dealt with it?

In asking this interview question, your interviewer wants to get a sense of how you will respond to conflict. Anyone can seem nice and pleasant in a job interview, but what will happen if you're hired?. Again, you'll want to use the S-T-A-R method, being sure to focus on how you handled the situation professionally and productively, and ideally closing with a happy ending, like how you came to a resolution or compromise.

35. What's been your biggest failure to date?

Describe your biggest failure and discuss what you've learned from it and ideally how you've been successful since because of that lesson.

36. What have you done to reduce costs, increase revenue, or save time?

Even if your only experience is an internship, you have likely created or streamlined a process that has contributed to the earning potential or efficiency of the practice. Choose at least one suitable example and explain how you got the idea, how you implemented the plan, and the benefits to the practice.

37. Where do you see yourself in 5 years with your career?

Be sure to paint a clear picture of your career vision that demonstrates your aspirations and goals that are realistic. This could emphasize increased responsibility, the ability to manage people and so forth

38. What makes a product successful?

Basing on the monetization, these questions give you the chance to prove your personal try. Do not show extremely your optimism and pursue the unreality. Give your answers the reality.
It is useful to predict a five to ten- year- scenario of expectations in order to gain your targets that you set up and it is the period of time to see how your plans and targets are performed.
Therefore, the quality of the product and marketability of the mentioned industry need to be highlighted. This will help you to achieve the interviewer's attention and insurance to you personality and you can get the honest and long- term goals.

39. How many tennis balls can you fit into a limousine? 1,000? 10,000? 100,000? Seriously?

Well, seriously, you might get asked brainteaser questions like these, especially in quantitative jobs. But remember that the interviewer doesn't necessarily want an exact number-he wants to make sure that you understand what's being asked of you, and that you can set into motion a systematic and logical way to respond. So, just take a deep breath, and start thinking through the math. (Yes, it's OK to ask for a pen and paper!)

40. How well do you know this industry?

Two things businesses need to pay attention to in their industries are what their competition is doing and the customers. You may not always agree with your competitors but it is important to be aware of what changes they are making. Very well. I have been in the industry for over 6 years.

41. Describe to me a time where you had to make a hard decision As Pre-Assembly Printed Circuit Board Component Teste?

Hard decisions are hard for a reason. It could dramatically effect the company. It could affect other workers. So if you have a story about how you made a hard decision and had a good outcome, share that. If you have one where the outcome wasn't great, explain how you would have changed the way you approached the decision to show you learned how to improve.

42. How do you stay up to date with industry?

Discuss how you stay up to date by reading industry specific sites, magazines, and Google / yahoo news. Also make sure you stay up to date by reading the current news on the company's website.

43. How articulate are you in expressing your ideas?

One of the best ways to answer this question is clearly articulate three points that demonstrate how articulate you are (and in a sense show that in a live setting) - for example: "I would say I'm articulate because one, I typically gather my thoughts before speaking, two, I organize my thoughts well, and three I'm concise when making a point.

44. How have you shown yourself to be a leader?

Think about a time where you've rallied a group of people around a cause / idea / initiative and successfully implemented it. It could be a small or large project but the key is you want to demonstrate how you were able to lead others to work for a common cause.

45. How do you handle stressful situations?

By remaining calm, weighing out all my options and executing a plan to get the situation resolve .

46. How many square feet of pizza are eaten in the United States each month?

This is a classic guesstimate question where you need to think aloud. And so first off you round the U.S. population to 300 million people (it's actually about 315 million but rounding will be much easier and your interviewer will not score you lower for rounding). Then estimate how many people eat pizza. A decent educated guess is two out of every three people, or 200 million. Now let's say the average pizza-eating person eats pizza twice a month, and eats two slices at a time. That's four slices a month. If the average slice of pizza is perhaps six inches at the base and 10 inches long, then the slice is 30 square inches of pizza. So, four pizza slices would be 120 square inches (30 times 4).
Since one square foot equals 144 square inches (12 times 12), let's assume that each person who eats pizza eats one square foot per month. Since there are 200 million pizza-eating Americans, 200 million square feet of pizza are consumed in the U.S. each month. To summarize: 300 million people in America, 200 million eat pizza, average slice of pizza is six inches at the base and 10 inches long or 30 square inches, average American eats four slices of pizza a month, four pieces times 30 square inches equals 120 square inches (one square foot is 144 square inches), so let's assume one square foot per person, and thus one square foot times 200 million people equals 200 million square feet of pizza a month.

47. What kind of salary do you need As Pre-Assembly Printed Circuit Board Component Teste?

This is a loaded question and a nasty little game that you will probably lose if you answer first. So, do not answer it. Instead, say something like, that's a tough question. Can you tell me the range for this position? In most cases, the interviewer, taken off guard, will tell you. If not, say that it can depend on the details of the job. Then give a wide range.

48. Give an example of a time you successfully worked As Pre-Assembly Printed Circuit Board Component Teste on a team?

On the whole I prefer to stick to doing what I'm told rather than setting myself up to fail by doing things off my own bat. But there was this one time when I suggested to my boss at the pizza parlor that she try offering an ‘all you can eat' deal to students to boost trade on Mondays. She thought it was an interesting idea but nothing ever came of it.

49. Tell me something about your family background?

First, always feel proud while discussing about your family background. Just simple share the details with the things that how they influenced you to work in an airline field.

50. What problems have you encountered at work?

Wow, do we have problems! Where do I begin? Well, most of the problems are internal, just people not working well with each other. I have one person on our team who is a real problem, but it seems like management is afraid to do anything about it. So we all end up having to do extra work to cover for this person, who just doesn't work. We all say that he's retired in place. I think he's just holding on until retirement in a couple years. But he's a real problem. I complain about it--a lot--but nothing ever seems to get done. I've even written negative reviews about the person, hoping he will get canned, but it doesn't happen. I can't wait for him to retire.

51. How do you keep each member of the team involved and motivated?

Many managers mistakenly think that money is the prime motivator for their employees. However, according to surveys by several different companies, money is consistently ranked five or lower by most employees. So if money is not the best way to motivate your team, what is?

Employees' three most important issues according to employees are:
☛ Respect
☛ A sense of accomplishment
☛ Recognition

52. If I talked to your three biggest fans, who would they be and why?

If you can reference three professionals with executive titles (CXO, VP, Director, Manager), that carries a lot of weight. Make sure you highlight how you've helped them achieve their biggest objectives and how that's made them your fan.

53. What types of personalities do you work with best?

In the past, I have found it difficult to work with others who see themselves as better than others, who can take criticism, and who refuse to work with others. I have found it challenging to work with them b/c I am a team oriented person who feels the importance of working together over the needs of the individual especially in a learning environment.

54. What's the least rewarding work you've ever done and why?

Describe work you've done that you feel doesn't take advantage of your full potential. For example, "I once had to make paper copies for my job and I feel it didn't take full advantage of my skills. However, it did teach me to be humble in my work and to appreciate a good opportunity when it arose to use my skills"

55. Tell me the difference between good and exceptional?

Good gets the job done on time and is high quality. Exceptional is a game changer - it stands out, it's creative, it's above and beyond expectations. Tell the interviewer a story about how you were exceptional.

56. How do you think I rate as an interviewer?

I think you did fine. I'm sure you've conducted a lot of interviews, and it's probably second nature for you now. Thanks for taking the time to meet with me today. I'm sure you have a lot of things you have to juggle every day.
I'd say you rate at least ten out of ten. The questions you asked seemed spot on. I can tell you guys are working hard to find the perfect applicant for the job. I'm glad I could meet with you.

57. How would your friends describe you?

My friends would probably say that I'm extremely persistent – I've never been afraid to keep going back until I get what I want. When I worked as a program developer, recruiting keynote speakers for a major tech conference, I got one rejection after another – this was just the nature of the job. But I really wanted the big players – so I wouldn't take no for an answer. I kept going back to them every time there was a new company on board, or some new value proposition. Eventually, many of them actually said "yes" – the program turned out to be so great that we doubled our attendees from the year before. A lot of people might have given up after the first rejection, but it's just not in my nature. If I know something is possible, I have to keep trying until I get it.

58. What do you know about the company?

Any candidate can read and regurgitate the company's “About” page. So, when interviewers ask this, they aren't necessarily trying to gauge whether you understand the mission-they want to know whether you care about it. Start with one line that shows you understand the company's goals, using a couple key words and phrases from the website, but then go on to make it personal. Say, “I'm personally drawn to this mission because…” or “I really believe in this approach because…” and share a personal example or two.

59. How would you observe the level of motivation of your subordinates?

Choosing the right metrics and comparing productivity of everyone on daily basis is a good answer, doesn't matter in which company you apply for a supervisory role.

60. What is your greatest weakness As Pre-Assembly Printed Circuit Board Component Teste? What are you doing to improve it?

I believe my biggest weakness As Pre-Assembly Printed Circuit Board Component Teste is wanting to help anyone I can help. What I mean is I am willing to take on task that are not my job. I want to learn all I can. However, that has helped me get promoted or even asked to help in times of need in other department. I have been know as the "go to person" when help is needed.

61. What features of your previous jobs have you disliked?

It's easy to talk about what you liked about your job in an interview, but you need to be careful when responding to questions about the downsides of your last position. When you're asked at a job interview about what you didn't like about your previous job, try not to be too negative. You don't want the interviewer to think that you'll speak negatively about this job or the company should you eventually decide to move on after they have hired you.

62. What would your first 30, 60, or 90 days look like in this role As Pre-Assembly Printed Circuit Board Component Teste?

Start by explaining what you'd need to do to get ramped up. What information would you need? What parts of the company would you need to familiarize yourself with? What other employees would you want to sit down with? Next, choose a couple of areas where you think you can make meaningful contributions right away. (e.g., “I think a great starter project would be diving into your email marketing campaigns and setting up a tracking system for them.”) Sure, if you get the job, you (or your new employer) might decide there's a better starting place, but having an answer prepared will show the interviewer where you can add immediate impact-and that you're excited to get started.

63. Are you aggressive?

If you are, describe it through a story / experience that you had. If you aren't, then explain why you're not. If the job role asks for you to be aggressive/not aggressive and you're the opposite of it, explain how you would develop that characteristic.

64. What general trends do you see in our industry?

Examine what's happened in the industry in the last 5 - 10 years and how it's evolved and then look at what both the company and analysts are saying about the future of that industry in which that company competes in. Read trade magazines / online sources in that industry as well to make sure you stay up to date on trends.

65. What does "thinking outside the box" mean to you?

It means not doing things exactly the same way as everyone else. You've got to challenge the status quo and bring something new to the business.

66. Do you think a leader should be feared or liked?

Liked. You want to work harder for people that inspire and motivate you. Fear only lasts for so long.

67. What's the most rewarding work you've ever done and why?

Companies love it when you discuss how you've made an impact on your teammates, clients, or partners in the business or in school. It should be rewarding because of the hard work and creative process that you've put into it.