1. Where do you see your career in five years In Autocad Solidworks?
I would like to retire from this company. I would like to make a difference in the company whether in the company or any other position or area of the company In Autocad Solidworks.
2. Why do you want to work for this company?
Again be honest. The interviewer will be able to sense very quickly if you're be disingenuous. Your answer should be base on your person reasons, career aspirations as well as research you've performed on the company. The most important thing you should do is make sure to relate your answer to your long-term career goals.
3. Describe a time when you anticipated potential problems and developed preventive measures?
The key here is to show that you were proactive. How did you find out about the potential problems? How did you address it quickly?
4. Tell me about a time you failed?
Everyone has failed, so don't play dumb or claim you've never messed up In Autocad Solidworks. Think of a time when a work-related situation didn't turn out quite as you had hoped. An interviewer is interested in seeing how you took responsibility for your failure, what you learned from it, and how you would prevent similar failures from happening again.
5. What has disappointed you about a previous job?
Again, this question could get you in trouble so tread carefully. Some good answers might be that your previous job didn't provide any room for growth, that you were laid off due to a mandatory reduction in staff, that they closed their office in your state and required you to relocate, etc. Make sure not to mention anything negative about the people you worked with, the company in general or the job itself.
6. What motivates you the most?
Is it money? Is it career development? Is it recognition? Is it a sense of achievement? Is it to impress your peers? Is it for fame?
7. What type of people do you not work well with?
Be very careful answering this question as most organization employ professionals with an array of personalities and characteristics. You don't want to give the impression that you're going to have problems working with anyone currently employed at the organization. If you through out anything trivial you're going to look like a whiner. Only disloyalty to the organization or lawbreaking should be on your list of personal characteristics of people you can't work with.
8. How do you prioritize your work?
Depends on the situation... I like to label certain tasks as either A B or C...A being the one that requires immediate attention, and C which are tasks that aren't urgent but eventually need to get done... I like to focus my work In Autocad Solidworks on the things that need to get done, and done quickly... While balancing the other work alongside our first priorities.
9. Tell me about a time when you helped resolve a dispute between others?
Be sure to discuss a very specific example. Tell the interviewer what methods you used to solve the problem without focusing on the details of the problem.
10. What are your strengths In Autocad Solidworks?
This is one of the most common questions you will be asked. Give an answer relevant to the skills and qualities relevant to the position you are applying to. The interviewer is trying to find if your strengths match the job. For example, if you are applying for a job In Autocad Solidworks where accuracy is an important issue, one of your strengths could be that you have an eye for detail. It may useful to find different words to describe similar attributes and qualities in order to avoid repetition.
11. Why are you leaving last job?
Although this would seem like a simple question, it can easily become tricky. You shouldn't mention salary being a factor at this point In Autocad Solidworks. If you're currently employed, your response can focus on developing and expanding your career and even yourself. If you're current employer is downsizing, remain positive and brief. If your employer fired you, prepare a solid reason. Under no circumstance should you discuss any drama or negativity, always remain positive.
Focus on the issue that impacts the business most first.
13. Tell me about a decision you made recently and how you reached it In Autocad Solidworks?
The key is to show that you put a lot of thought (weighing out the pros and cons) but were able to be decisive. Be sure to explain your logic in arriving at the decision.
14. What motivates you at the work place?
Keep your answer simple, direct and positive. Some good answers may be the ability to achieve, recognition or challenging assignments.
15. Your coworker highlights your mistakes in front of everyone, how do you handle the situation?
Admit to the mistake without being emotional, but then discuss how you are being proactive in getting it fixed. Lastly, pull the co-worker aside later on to tell them that you'd appreciate it if they gave you the feedback 1:1 first before throwing you under the bus.
16. What is the difference between a big ego and a healthy ego?
"Ego" should be replaced by confidence. It's good to be confident as it shows that you know what you're doing. However, a big ego is when confidence spirals out of control and you become arrogant.
17. What is your greatest professional achievement?
Nothing says “hire me” better than a track record of achieving amazing results in past jobs In Autocad Solidworks, so don't be shy when answering this interview question! A great way to do so is by using the S-T-A-R method: Set up the situation and the task that you were required to complete to provide the interviewer with background context (e.g., “In my last job as a Autocad Solidworks, it was my role to manage the invoicing process”), but spend the bulk of your time describing what you actually did (the action) and what you achieved (the result). For example, “In one month, I streamlined the process, which saved my group 10 man-hours each month and reduced errors on invoices by 25%.”
18. What is your greatest fear?
We all have fears. It's okay to discuss them. Just don't dive too deeply into them. Discuss how you would work to overcome your fears. You don't want to seem weak. You want to acknowledge it's out there but that you'll be able to work through it.
Take a break to rest. Work in smaller increments of time to increase focus with breaks in between. Delegate tasks to those that are willing to help.
20. Do you have any blind spots?
This question is often meant to trick candidates since acknowledgment of blind spots would indicate they were aware of them. Also, do not disclose bad habits or other personal concerns. Let the interviewer find out about your personal flaws through the course of the interview without directly stating these flaws.
21. What are the goals you've set for yourself?
You could discuss your goals with regards to these categories: Career goals, impact you want to leave on society, financial goals, academic goals, charitable goals.
22. What does "collaboration with teammates" mean to you?
Drinking at the water cooler together is not the best example. Think of how you can collaborate with teammates to generate new ideas, to create initiatives to impact the business' success for the better (specifically in the department that you're applying for). For example, if you're applying to marketing, collaboration could mean discussing new ways of social media advertising to reach an audience of over a million people to strengthen the brand awareness of the company.
23. How do you handle conflicts with people you supervise?
At first place, you try to avoid conflicts if you can. But once it happens and there's no way to avoid it, you try to understand the point of view of the other person and find the solution good for everyone. But you always keep the authority of your position.
24. What are three positive character traits you don't have?
List three attributes that you aspire to attain / build in the next few years - and then explain how you would develop those.
25. How do you feel about taking no for an answer?
It's good to be persistent, but not overbearing. Everyone will face rejection at some point in their life, so at some point you'll have to take no for an answer but then learn why you were turned down.
26. What are three positive characteristics you wish you had?
The key here is to be honest about your wish list but then to describe how you plan on developing or growing those characteristics so that it becomes a reality. For example, I wish I had a stronger work ethic and I am reading a book right now about how to instill a better discipline around getting work done efficiently.
27. What differentiates you from the competition?
Think about what you bring to the table that you truly believe is unique - the easiest way to do is to think of your own personal stories that demonstrate your work ethic, skills, and dedication. Most people have some or all of those skills, but the unique stories are what make people stand out in interviews.
28. What role do you see technology playing in this role?
Technology is important to almost every job today but it's not meant to be abused. I believe it's important to increase productivity and not for personal use.
29. How many basketballs would fit in this room?
One. You did not ask what is the maximum number of basketballs you can fit in the room.
30. What do you consider to be your weaknesses?
What your interviewer is really trying to do with this question-beyond identifying any major red flags-is to gauge your self-awareness and honesty. So, “I can't meet a deadline to save my life In Autocad Solidworks” is not an option-but neither is “Nothing! I'm perfect!” Strike a balance by thinking of something that you struggle with but that you're working to improve. For example, maybe you've never been strong at public speaking, but you've recently volunteered to run meetings to help you be more comfortable when addressing a crowd.
31. What do you like to do outside of work?
Interviewers ask personal questions in an interview to “see if candidates will fit in with the culture [and] give them the opportunity to open up and display their personality, too,”. In other words, if someone asks about your hobbies outside of work, it's totally OK to open up and share what really makes you tick. (Do keep it semi-professional, though: Saying you like to have a few beers at the local hot spot on Saturday night is fine. Telling them that Monday is usually a rough day for you because you're always hungover is not.)
32. What do you already know about our company?
Good reputation of a large home grown company that has various departments and product.
33. What is your greatest strength? How does it help you In Autocad Solidworks?
One of my greatest strengths, and that I am a diligent worker... I care about the work getting done.. I am always willing to help others in the team.. Being patient helps me not jump to conclusions... Patience helps me stay calm when I have to work under pressure.. Being a diligent worker.. It ensures that the team has the same goals in accomplishing certain things.
34. How would you describe your approach to Autocad Solidworks?
In more general terms, a question such as this gives a candidate the opportunity to talk about their professional philosophy and skills. While the question is general in nature, the best answers are usually quite specific, picking one or two points and exemplifying them with instances from personal history.
35. What classes did you enjoy most in college and why?
Think back to the classes that either resonated with your passion or truly helped you to develop skills that you believe will help you in your career. Talk about those.
36. What motivates you to succeed?
Your interviewer will likely want to know the reasons why you will remain motivated to do your best during your employment with the company In Autocad Solidworks. Perhaps you are interested in being challenged, but you may also have interest in being recognized for your hard work in the form of the number of sales you can attain. A great example answer for this question is “I always do my best in everything, including my job. I take pride in my success, and I also want the company for which I work to be successful. Being affiliated with a company that is known for its excellence is very important to me.”
37. What are your thoughts on social media for this role?
Without a doubt, social media is becoming more and more pervasive in our jobs. You should stress that social media is not appropriate for personal use at work. However, if the company embraces social media in certain departments (for example marketing), then you may want to discuss how you could use it for work (as long as it applies to your role).
38. How do you feel about taking on repetitive tasks In Autocad Solidworks?
This answer depends on whether or not the job has a lot of repetitive tasks with no variation. If it does, then you would need to be okay with the idea of doing the same task over and over again. If you feel you can offer more than repetitive work, then describe how you would be able to do so.
39. What are ideas or initiatives you've led and what was the outcome?
Describe your most unique ideas and initiatives that had the best results for the company. Make sure you highlight your creativity, your results, your diligence and your ability to execute.
40. What other companies are you interviewing with?
Companies ask this for a number of reasons, from wanting to see what the competition is for you to sniffing out whether you're serious about the industry. “Often the best approach is to mention that you are exploring a number of other similar options in the company's industry,”. It can be helpful to mention that a common characteristic of all the jobs you are applying to is the opportunity to apply some critical abilities and skills that you possess. For example, you might say 'I am applying for several positions with IT consulting firms where I can analyze client needs and translate them to development teams in order to find solutions to technology problems.'
41. Explain a time when you did not get along with your coworker?
I used to lock heads with a fellows. We disagreed over a lot of things – from the care of civilians to who got what shifts to how to speak with a victim's family. Our personalities just didn't mesh. After three months of arguing, I pulled her aside and asked her to lunch. At lunch, we talked about our differences and why we weren't getting along. It turns out, it was all about communication. We communicated differently and once we knew that, we began to work well together. I really believe that talking a problem through with someone can help solve any issue.
42. Describe what a bad work environment would look like to you In Autocad Solidworks?
There could be a multitude of things to discuss here: Business ethics (wrongdoing), inconsiderate teammates, non-supportive management, a product that does not do what you're promising customers and so forth.
43. If I talked to your three biggest fans, who would they be and why?
If you can reference three professionals with executive titles (CXO, VP, Director, Manager), that carries a lot of weight. Make sure you highlight how you've helped them achieve their biggest objectives and how that's made them your fan.
44. Do you have any question regarding this job In Autocad Solidworks?
Never ask Salary, perks, leave, place of posting, etc. regarded questions. Try to ask more about the company to show how early you can make a contribution to your organization like. “Sir, with your kind permission I would like to know more about induction and developmental programs?” OR Sir, I would like to have my feedback, so that I can analyze and improve my strengths and rectify my shortcomings.
45. What would you like to have accomplished by the end of your career?
Think of 3 major achievements that you'd like to accomplish in your job when all is said and done - and think BIG. You want to show you expect to be a major contributor at the company. It could be creating a revolutionary new product, it could be implementing a new effective way of marketing, etc.
46. What do you think we could do better or differently?
This is a common one at startups. Hiring managers want to know that you not only have some background on the company, but that you're able to think critically about it and come to the table with new ideas. So, come with new ideas! What new features would you love to see? How could the company increase conversions? How could customer service be improved? You don't need to have the company's four-year strategy figured out, but do share your thoughts, and more importantly, show how your interests and expertise would lend themselves to the job.
47. How would you define success?
Success is defined differently for everybody. Just make sure the parameters are defined by you with regards to work life balance, financial gain, career growth, achievements, creating meaningful work / products and so forth. If you can clearly articulate what it means to you that is a strong answer.
48. What would you do if our competitor offered you a position In Autocad Solidworks?
I would weigh the offer and consider it, however, this company and this role is my first choice.
If you are, describe it through a story / experience that you had. If you aren't, then explain why you're not. If the job role asks for you to be aggressive/not aggressive and you're the opposite of it, explain how you would develop that characteristic.
50. Do you have any questions for me?
Good interview questions to ask interviewers at the end of the job interview include questions on the company growth or expansion, questions on personal development and training and questions on company values, staff retention and company achievements.
51. What's the most rewarding work you've ever done and why?
Companies love it when you discuss how you've made an impact on your teammates, clients, or partners in the business or in school. It should be rewarding because of the hard work and creative process that you've put into it.
52. What is your greatest weakness In Autocad Solidworks? What are you doing to improve it?
I believe my biggest weakness In Autocad Solidworks is wanting to help anyone I can help. What I mean is I am willing to take on task that are not my job. I want to learn all I can. However, that has helped me get promoted or even asked to help in times of need in other department. I have been know as the "go to person" when help is needed.
53. What was the most important task you ever had?
There are two common answers to this question that do little to impress recruiters:
☛ ‘I got a 2.1'
☛ ‘I passed my driving test'
No matter how proud you are of these achievements, they don't say anything exciting about you. When you're going for a graduate job, having a degree is hardly going to make you stand out from the crowd and neither is having a driving licence, which is a requirement of many jobs.
54. Explain an occasion when you had to adapt in the face of a difficult situation?
One of the most useful interview tactics is to remain positive about your work and achievements. This question lets the candidate draw on their own personal history to show how they have been positive and successful in the face of difficulties. Choose a specific occasion to describe, rather than dealing with generic platitudes.
55. Describe to me the position In Autocad Solidworks you're applying for?
This is a “homework” question, too, but it also gives some clues as to the perspective the person brings to the table. The best preparation you can do is to read the job description and repeat it to yourself in your own words so that you can do this smoothly at the interview.
56. Tell me the difference between good and exceptional?
Good gets the job done on time and is high quality. Exceptional is a game changer - it stands out, it's creative, it's above and beyond expectations. Tell the interviewer a story about how you were exceptional.
57. How long will it take for you to make a significant contribution?
First define significant contribution - once you do that - lay out a timeline plan in which you think you can achieve that.
58. How would you motivate your team members to produce the best possible results?
Trying to create competitive atmosphere, trying to motivate the team as a whole, organizing team building activities, building good relationships amongst people.
59. Why are you leaving your current job?
This is a toughie, but one you can be sure you'll be asked. Definitely keep things positive-you have nothing to gain by being negative about your past employers. Instead, frame things in a way that shows that you're eager to take on new opportunities and that the role you're interviewing for is a better fit for you than your current or last position. For example, “I'd really love to be part of product development from beginning to end, and I know I'd have that opportunity here.” And if you were let go? Keep it simple: “Unfortunately, I was let go,” is a totally OK answer.
60. How many square feet of pizza are eaten in the United States each month?
This is a classic guesstimate question where you need to think aloud. And so first off you round the U.S. population to 300 million people (it's actually about 315 million but rounding will be much easier and your interviewer will not score you lower for rounding). Then estimate how many people eat pizza. A decent educated guess is two out of every three people, or 200 million. Now let's say the average pizza-eating person eats pizza twice a month, and eats two slices at a time. That's four slices a month. If the average slice of pizza is perhaps six inches at the base and 10 inches long, then the slice is 30 square inches of pizza. So, four pizza slices would be 120 square inches (30 times 4).
Since one square foot equals 144 square inches (12 times 12), let's assume that each person who eats pizza eats one square foot per month. Since there are 200 million pizza-eating Americans, 200 million square feet of pizza are consumed in the U.S. each month. To summarize: 300 million people in America, 200 million eat pizza, average slice of pizza is six inches at the base and 10 inches long or 30 square inches, average American eats four slices of pizza a month, four pieces times 30 square inches equals 120 square inches (one square foot is 144 square inches), so let's assume one square foot per person, and thus one square foot times 200 million people equals 200 million square feet of pizza a month.
61. Give an example of a time you successfully worked In Autocad Solidworks on a team?
On the whole I prefer to stick to doing what I'm told rather than setting myself up to fail by doing things off my own bat. But there was this one time when I suggested to my boss at the pizza parlor that she try offering an ‘all you can eat' deal to students to boost trade on Mondays. She thought it was an interesting idea but nothing ever came of it.
Show that you were communicative with that person and that you were able to collaborate effectively in sharing ideas and work tasks. They want to see that you can be a team player.
63. Tell me one thing about yourself you wouldn't want me to know?
Talk about a trait that you would consider a weakness. No need to talk about your deepest darkest secrets here.
64. How would you observe the level of motivation of your subordinates?
Choosing the right metrics and comparing productivity of everyone on daily basis is a good answer, doesn't matter in which company you apply for a supervisory role.
65. How do you act when you encounter competition?
This question is designed to see if you can rise the occasion. You want to discuss how you are the type to battle competition strongly and then you need to cite an example if possible of your past work experience where you were able to do so.