1. Are you willing to work in shifts?
If the job calls for shifts that vary, be ready to do that for your work. If you aren't open to that, then explain why and see if they can adjust it for you.
2. What do you see yourself doing within the first 30 days of this job?
Typically the first 30 days are designed for you to learn as much as possible As Foam Rubber Maker. Work hard to get to know your teammates, how they work together, and how you can make the biggest impact.
This would be the first question asked in any interview. Therefore, it is important that you give a proper reply to the question regarding your education. You should have all the documents and certificates pertaining to your education and/or training, although time may not allow the interviewer to review all of them.
4. What kind of work interests you the least As Foam Rubber Maker?
What bores you? What fails to challenge you? What fails to excite you?
5. Why was there a gap in your employment As Foam Rubber Maker?
If you were unemployed for a period of time, be direct and to the point about what you've been up to (and hopefully, that's a litany of impressive volunteer and other mind-enriching activities, like blogging or taking classes). Then, steer the conversation toward how you will do the job and contribute to the organization: “I decided to take a break at the time, but today I'm ready to contribute to this organization in the following ways.”
6. Tell me about a time when you were forced to make an unpopular decision?
Not every decision is popular. In fact, almost every decision is bound to make someone unhappy at some point. The key is to demonstrate how it impacted others positively and why you chose it.
7. What type of salary are you looking for?
This can be a very tricky question as the individual asking it is probably digging for something other than a simple answer to the question. We recommend that you don't immediately respond to the question directly. Instead, say something like, “That a difficult question. What is range for this position?” More often than not the interviewer will tell you. If the interviewer insists on direct answer you may want say that it depends on the details of the job - then give a wide salary range.
8. How did you handle meeting a tight deadline As Foam Rubber Maker?
Review every deadline you need to meet. Prioritize your projects by deadline and factor in how important each project is. Record your deadlines on a digital calendar or spreadsheet.
9. What is your typical way of dealing with conflict? Give me an example?
First, find out what the root of the problem is. Second, determine the best steps to remediation with the best possible outcome. Third, take action to put remediation plans in place.
10. What qualities do you look for in a boss?
Remain optimistic and do not be too specific. Good attributes include moral character, honesty, and intelligence since managers usually believe they possess these qualities.
11. How do you believe you would benefit our organization?
This is a great question that provides you the opportunity to put your best foot forward, to tell the interviewer why he or she should consider hiring you for the job. Make sure you're well prepared for this question as you won't likely get a second chance to really shine.
12. How do you think you might fit this position As Foam Rubber Maker?
An important part of research before the interview is what the company does and how the job role relates to that. This includes the company philosophy and working methods. Questions such as this seek to find out how a candidate will fit into the organisation As Foam Rubber Maker. Answer positively; including practical examples of how you anticipate you would perform in the new role.
13. Where do you see yourself in five years? Ten years?
Bad Answer: A generic or uninspired answer. Also, answers that show that this career/company is just a temporary stop for them.
Good answer: One that shows the candidate has thought about this question, has plans, and that those plans align with the job and a career path that is possible in the company. You want to see that this candidate is a good long term investment.
Example stories could be a class project, an internal meeting presentation, or a customer facing presentation.
15. What is your greatest strength As Foam Rubber Maker?
This is your time to shine. Just remember the interviewer is looking for work related strengths As Foam Rubber Maker. Mention a number of them such as being a good motivator, problem solver, performing well under pressure, being loyal, having a positive attitude, eager to learn, taking initiative, and attention to detail. Whichever you go for, be prepared to give examples that illustrate this particular skill.
The key is to show that the mentoring of a co-worker was first a higher priority than the task you had at hand (remember, you want to show that you focus on highest priority tasks first). Then, describe in detail how you helped them not only complete the task but learn to do it on their own. You want to teach them HOW to fish and not to simply fish for them.
17. Tell me about a time when you helped resolve a dispute between others?
Be sure to discuss a very specific example. Tell the interviewer what methods you used to solve the problem without focusing on the details of the problem.
18. What is the difference between a big ego and a healthy ego?
"Ego" should be replaced by confidence. It's good to be confident as it shows that you know what you're doing. However, a big ego is when confidence spirals out of control and you become arrogant.
19. Do you think you are overqualified for this position As Foam Rubber Maker?
No matter your previous job experience or educational background, be sure to tell the interviewer you have the knowledge and skills to successfully execute the job responsibilities.
20. What have you learned from mistakes on this job?
Candidates without specific examples often do not seem credible. However, the example shared should be fairly inconsequential, unintentional, and a learned lesson should be gleaned from it. Moving ahead without group assistance while assigned to a group project meant to be collaborative is a good example.
21. How articulate are you in expressing your ideas?
One of the best ways to answer this question is clearly articulate three points that demonstrate how articulate you are (and in a sense show that in a live setting) - for example: "I would say I'm articulate because one, I typically gather my thoughts before speaking, two, I organize my thoughts well, and three I'm concise when making a point.
22. What have you done to prepare yourself to be a supervisor?
1. Learn from current supervisors (best practices)
2. Mentor others
3. Be exceptionally good at your current job so that it builds your credibility
4. Have a high emotional IQ
23. If hired, how do you intend on making a difference with our company?
Dedicate myself to learn everything about the new company that I can, look for ways and ideas that could improve, processes, safety, removing obstacles from the associates, I want to advance within the company.
24. What classes did you enjoy most in college and why?
Think back to the classes that either resonated with your passion or truly helped you to develop skills that you believe will help you in your career. Talk about those.
25. What do you already know about our company?
Good reputation of a large home grown company that has various departments and product.
26. What differentiates you from the competition?
Think about what you bring to the table that you truly believe is unique - the easiest way to do is to think of your own personal stories that demonstrate your work ethic, skills, and dedication. Most people have some or all of those skills, but the unique stories are what make people stand out in interviews.
27. What is your biggest regret to date and why?
Describe honestly the regretful action / situation you were in but then discuss how you proactively fixed / improved it and how that helped you to improve as a person/worker.
28. Why should we select you not others?
Here you need to give strong reasons to your interviewer to select you not others. Sell yourself to your interviewer in interview in every possible best way. You may say like I think I am really qualified for the position. I am a hard worker and a fast learner, and though I may not have all of the qualifications that you need, I know I can learn the job and do it well.”
29. What are you most proud of?
You should be proud of all your achievements As Foam Rubber Maker! We just don't have time to hear them all as interviewers most likely. Focus on 1 really good achievement that showcases characteristics like the following: Integrity, competitiveness, resourcefulness, intelligence, persistence, and so forth.
30. Who are your role models? Why?
If possible, cite role models you're truly passionate about - passion is contagious and will show you're being genuine. If the role model is in the same or similar industry as the company in an executive level position, even better.
31. What do you like to do outside of work?
Interviewers ask personal questions in an interview to “see if candidates will fit in with the culture [and] give them the opportunity to open up and display their personality, too,”. In other words, if someone asks about your hobbies outside of work, it's totally OK to open up and share what really makes you tick. (Do keep it semi-professional, though: Saying you like to have a few beers at the local hot spot on Saturday night is fine. Telling them that Monday is usually a rough day for you because you're always hungover is not.)
32. What will your ramp time be before you become a meaningful contributor?
Companies want staff that can ramp quickly, but also want people who are realistic. So take into consideration how intense the job is and then give a good answer. For example, if you have simple responsibilities that don't require a huge development curve, then your ramp time will probably be shorter. If it's a complex set of skills that you need to develop, then your ramp time could be longer - the key is you have to explain why you believe that ramp time should be.
33. How would you estimate the weight of the Chrysler building?
This is a process guesstimate where the interviewer wants to know if you know what to ask. First, you would find out the dimensions of the building (height, weight, depth). This will allow you to determine the volume of the building. Does it taper at the top? (Yes.) Then, you need to estimate the composition of the Chrysler building. Is it mostly steel? Concrete? How much would those components weigh per square inch? Remember the extra step: find out whether you're considering the building totally empty or with office furniture, people, etc. If you're including the contents, you might have to add 20 percent or so to the building's weight.
34. Tell me about a time when you were held accountable for a problem that you hadn't caused?
If someone puts the blame on you (incorrectly), the best thing you can do is NOT to retaliate. You want to make it known that you were not to blame (explain all the facts) and then focus on fixing the problem in the best way possible.
35. What challenges are you looking for in this position?
A typical interview question to determine what you are looking for your in next job, and whether you would be a good fit for the position being hired for, is “What challenges are you looking for in a position As Foam Rubber Maker?” The best way to answer questions about the challenges you are seeking is to discuss how you would like to be able to effectively utilize your skills and experience if you were hired for the job. You can also mention that you are motivated by challenges, have the ability to effectively meet challenges, and have the flexibility and skills necessary to handle a challenging job. You can continue by describing specific examples of challenges you have met and goals you have achieved in the past.
36. How do you handle conflicts with people you supervise?
At first place, you try to avoid conflicts if you can. But once it happens and there's no way to avoid it, you try to understand the point of view of the other person and find the solution good for everyone. But you always keep the authority of your position.
37. How do you deal with pressure or stressful situations?
Choose an answer that shows that you can meet a stressful situation head-on in a productive, positive manner and let nothing stop you from accomplishing your goals. A great approach is to talk through your go-to stress-reduction tactics (making the world's greatest to-do list, stopping to take 10 deep breaths), and then share an example of a stressful situation you navigated with ease.
38. What are three positive character traits you don't have?
List three attributes that you aspire to attain / build in the next few years - and then explain how you would develop those.
39. Why should we give you this job As Foam Rubber Maker when someone else is equally qualified?
Describe how you're unique, but make sure you tie it to the job responsibilities and how you would impact the company. For example, "I believe my unique programming skills and experience in developing over 18 best selling iphone apps will help the company develop high quality applications faster than my competitors"
40. Do you like being around people?
People skills are a necessity for medical assistants. When answering this question, be sure to show that you enjoy interacting and working with others and that you also derive great enjoyment from helping others. This will show that you are a team player and that you would be a valuable team member As Foam Rubber Maker.
41. What type of work environment do you prefer?
Ideally one that's similar to the environment of the company you're applying to. Be specific.
42. Rate yourself on a scale of 10?
If you truly believe you're a 10, you better be able to explain why with examples / stories. If you believe you're a great contributor and have room to grow, say 8 or 9. If you're below that, explain what you would do to improve yourself to get the ranking you believe you can be.
43. What features of your previous jobs have you disliked?
It's easy to talk about what you liked about your job in an interview, but you need to be careful when responding to questions about the downsides of your last position. When you're asked at a job interview about what you didn't like about your previous job, try not to be too negative. You don't want the interviewer to think that you'll speak negatively about this job or the company should you eventually decide to move on after they have hired you.
44. What is your desired salary As Foam Rubber Maker?
Bad Answer: Candidates who are unable to answer the question, or give an answer that is far above market. Shows that they have not done research on the market rate, or have unreasonable expectations.
Good answer: A number or range that falls within the market rate and matches their level of mastery of skills required to do the job.
45. Tell me the difference between good and exceptional?
Good gets the job done on time and is high quality. Exceptional is a game changer - it stands out, it's creative, it's above and beyond expectations. Tell the interviewer a story about how you were exceptional.
46. What's the least rewarding work you've ever done and why?
Describe work you've done that you feel doesn't take advantage of your full potential. For example, "I once had to make paper copies for my job and I feel it didn't take full advantage of my skills. However, it did teach me to be humble in my work and to appreciate a good opportunity when it arose to use my skills"
47. What is your biggest achievement?
Quality work to be is about doing work to the require or set standard, which is very important when it comes to warehouse operations.
If you are, describe it through a story / experience that you had. If you aren't, then explain why you're not. If the job role asks for you to be aggressive/not aggressive and you're the opposite of it, explain how you would develop that characteristic.
49. How would you go about establishing your credibility quickly As Foam Rubber Maker with the team?
Fully understand my responsibilities, work hard and exceed expectations, learn as much as possible, help others as much as possible, understand what my teammates' goals and needs are, be on time, and gain a mentor.
50. How do you evaluate your ability to handle conflict?
I pride myself on being a good problem solver. Through my previous job and management positions I have faced numerous conflicts in different situations, and my experiences have helped me to hone my issue resolution skills. I believe that it is important to get to and address the root of the issue, in a respectable manner.
51. What do you look for in terms of culture -- structured or entrepreneurial?
A good answer is to discuss the importance of having both elements in a company As Foam Rubber Maker. Structure is good to maintain a focus on priorities and making sure people are productive but having an entrepreneurial spirit can help cultivate new ideas that can truly help the company.
52. What's your salary history?
When you are interviewing for a new job, it is common practice for the company to ask you about your salary history. I typically want to know what the candidate's base salary is, if they receive any bonus, the average bonus amount, and any additional compensation or perks, such as 500k matching, stock grants or stock options, paid time off and how much they are required to pay towards their medical premiums.
53. What does "thinking outside the box" mean to you?
It means not doing things exactly the same way as everyone else. You've got to challenge the status quo and bring something new to the business.
54. What do you know about this department?
One good way to find out about the department is to try to "informally" interview the existing employees over coffee (outside of the office) if possible. It's hard if you don't have any connections there, but if you do a great way to learn about it. Other than that, it's often hard to learn about the department so you can turn the table back on them by asking questions to learn about it.
55. Do you think you have enough experience As Foam Rubber Maker?
If you do not have the experience they need, you need to show the employer that you have the skills, qualities and knowledge that will make you equal to people with experience but not necessary the skills. It is also good to add how quick you can pick up the routine of a new job role.
56. What are three positive things your last boss would say about you?
It's time to pull out your old performance appraisals and boss's quotes. This is a great way to brag about yourself through someone else's words:
“My boss has told me that I am the best designer he has ever had. He knows he can rely on me, and he likes my sense of humor.”
57. What kind of salary do you need As Foam Rubber Maker?
This is a loaded question and a nasty little game that you will probably lose if you answer first. So, do not answer it. Instead, say something like, that's a tough question. Can you tell me the range for this position? In most cases, the interviewer, taken off guard, will tell you. If not, say that it can depend on the details of the job. Then give a wide range.
58. What's the most rewarding work you've ever done and why?
Companies love it when you discuss how you've made an impact on your teammates, clients, or partners in the business or in school. It should be rewarding because of the hard work and creative process that you've put into it.
59. How much do you expect to get paid As Foam Rubber Maker?
For this be prepared and research salary to find out what similar positions are paying in your area before you go to the interview. Try to find this information out before giving your salary expectations. You can and should provide a range instead of an exact number. But again, don't say any numbers you're not comfortable with because if the employer offers you a salary at the lowest end of your range, you don't have much to negotiate with when it comes to getting a higher salary.
Just be honest about where you'd like to be - you never know - you may end up bonding with the interviewer with the location. However, you want to stress that you want to work out of the location that you're interviewing for.
61. What was the most important task you ever had?
There are two common answers to this question that do little to impress recruiters:
☛ ‘I got a 2.1'
☛ ‘I passed my driving test'
No matter how proud you are of these achievements, they don't say anything exciting about you. When you're going for a graduate job, having a degree is hardly going to make you stand out from the crowd and neither is having a driving licence, which is a requirement of many jobs.
62. Do you work well under pressure?
Yes.. When it comes down to the wire, the best thing I can to remain focused, have some flexibility, and understand priorities.. Giving them attention in the order they are needed.
