1. Are you good at working in a team Regarding Machine Operator Drilling Plastics?
Before you answer, consider how you best contribute to a team:
☛ Do you get along easily with people?
☛ Are you an effective collaborator?
☛ Can you communicate with people from various backgrounds and with different personalities?
☛ Can you motivate people?
☛ Do you know how to push back tactfully?
☛ Can you mediate conflicts?
☛ Can you deal with difficult personalities?
2. Why are you leaving last job?
Although this would seem like a simple question, it can easily become tricky. You shouldn't mention salary being a factor at this point Regarding Machine Operator Drilling Plastics. If you're currently employed, your response can focus on developing and expanding your career and even yourself. If you're current employer is downsizing, remain positive and brief. If your employer fired you, prepare a solid reason. Under no circumstance should you discuss any drama or negativity, always remain positive.
3. What has disappointed you about a previous job?
Again, this question could get you in trouble so tread carefully. Some good answers might be that your previous job didn't provide any room for growth, that you were laid off due to a mandatory reduction in staff, that they closed their office in your state and required you to relocate, etc. Make sure not to mention anything negative about the people you worked with, the company in general or the job itself.
4. What is your biggest weakness Regarding Machine Operator Drilling Plastics?
No one likes to answer this question because it requires a very delicate balance. You simply can't lie and say you don't have one; you can't trick the interviewer by offering up a personal weakness Regarding Machine Operator Drilling Plastics that is really a strength (“Sometimes, I work too much and don't maintain a work-life balance.”); and you shouldn't be so honest that you throw yourself under the bus (“I'm not a morning person so I'm working on getting to the office on time.”)
5. Explain what are your strengths Regarding Machine Operator Drilling Plastics?
Bad Answer: Candidate is unprepared for question or only gives generic answers.
This is the most common job interview question - everybody should be expecting it. If they don't seem prepared, or give a fairly stock answer, it's probably a bad sign.
Good answer: The consensus is to go for quality, not quantity here. Candidates should give a short list of strengths, and back each one up with examples that illustrate the strength. Also, they should explain how these strengths will be useful in the job you're applying for, and use this question to say something interesting about themselves.
6. What do you think about Teamwork?
I enjoy teamwork and am used to shift work. I think I would adapt well to the role. I am looking for new challenges Regarding Machine Operator Drilling Plastics and I know I would learn a lot as cabin crew, not just about people and places, but skills like first aid too, how can I help others with in my limits.
Example stories could be a class project, an internal meeting presentation, or a customer facing presentation.
8. What have you learned from mistakes on the job?
Candidates without specific examples often do not seem credible. However, the example shared should be fairly inconsequential, unintentional, and a learned lesson should be gleaned from it. Moving ahead without group assistance while assigned to a group project meant to be collaborative is a good example.
9. Your coworker highlights your mistakes in front of everyone, how do you handle the situation?
Admit to the mistake without being emotional, but then discuss how you are being proactive in getting it fixed. Lastly, pull the co-worker aside later on to tell them that you'd appreciate it if they gave you the feedback 1:1 first before throwing you under the bus.
10. What is your philosophy towards work?
This is typically a straightforward question that merits a straightforward answer. Do you have strong worth ethic? Will you do whatever it takes to make sure the job gets done? Just say so in your response. Keep it short, direct and positive.
11. Why did you leave your last job Regarding Machine Operator Drilling Plastics?
Regardless of why you left your last job make sure to stay positive. Always smile and focus on the positive reason such you were seeking the opportunity to expand your career opportunities, your interest in working with a new firm that provided greater opportunity, you desired to work in a new location, etc. Don't reference previous job problems or differences with management that caused you to leave. If you stay positive, your answer may help you. If you're negative, you will likely decrease your chances of getting the job for which you're interviewing.
No matter your previous job experience or educational background, be sure to tell the interviewer you have the knowledge and skills to successfully execute the job responsibilities.
13. Why do you want this job Regarding Machine Operator Drilling Plastics?
This question typically follows on from the previous one. Here is where your research will come in handy. You may want to say that you want to work for a company that is Global Guideline, (market leader, innovator, provides a vital service, whatever it may be). Put some thought into this beforehand, be specific, and link the company's values and mission statement to your own goals and career plans.
14. How have you made an impact on your team in the past?
I would explain and show to him or her best way possible and if they have a better way then I will encourage him or her to let me know then we can see if it works or not Regarding Machine Operator Drilling Plastics.
15. If you had enough money to retire would you?
Just be honest. If you would retire then say so. But since you can't retire, and the interviewer already knows this, simply answer that since you can't this is type of work you prefer doing. However, if you wouldn't retire if you had the money then explain why. Work is an important element of happiness for most people and many won't retire even when they can.
16. What motivates you at the work place?
Keep your answer simple, direct and positive. Some good answers may be the ability to achieve, recognition or challenging assignments.
17. How do you prioritize your work?
Depends on the situation... I like to label certain tasks as either A B or C...A being the one that requires immediate attention, and C which are tasks that aren't urgent but eventually need to get done... I like to focus my work Regarding Machine Operator Drilling Plastics on the things that need to get done, and done quickly... While balancing the other work alongside our first priorities.
18. How do you believe you would benefit our organization?
This is a great question that provides you the opportunity to put your best foot forward, to tell the interviewer why he or she should consider hiring you for the job. Make sure you're well prepared for this question as you won't likely get a second chance to really shine.
Ideally you want to able to type quickly, have the ability to effectively use Microsoft Office, and more importantly be able to quickly adapt to computer / technology skills. More and more it's become an integral part of work. If the job doesn't require technology skills - then this question shouldn't be asked!
Don't vent or focus on the negative with brutally honest answers such as "My boss was a jerk," or "The company culture was too politically correct," or "They just weren't giving me the opportunity to take my career to the next level." Instead, keep the emphasis on the positive, even though there are sure to be things you weren't happy about.
21. What differentiates you from the competition?
Think about what you bring to the table that you truly believe is unique - the easiest way to do is to think of your own personal stories that demonstrate your work ethic, skills, and dedication. Most people have some or all of those skills, but the unique stories are what make people stand out in interviews.
22. How meticulous are you with details?
Being detailed is important for many types of job roles. Typically you want to highlight how you've done that in previous roles. Example: "Being meticulous is important to me. In my last job, I had to count the money in the register as a cashier to make sure it matched to the receipts down to the last penny." This was to ensure there wasn't any "wrongdoing" at the company by any of the cashiers and I was always accurate in my reports.
23. What are three positive character traits you don't have?
List three attributes that you aspire to attain / build in the next few years - and then explain how you would develop those.
24. How have you shown yourself to be a leader?
Think about a time where you've rallied a group of people around a cause / idea / initiative and successfully implemented it. It could be a small or large project but the key is you want to demonstrate how you were able to lead others to work for a common cause.
25. Describe your vision of your perfect dream job?
Ideally, the role you're applying for either is that dream job or will help you get to it. If it's going to help you get there, describe the elements of that job role that you are passionate about so that it ties to the vision of what your dream job is. Be honest and talk about the type of work environment, management team / leadership, coworkers, culture, vision and products/services you'd like your dream job to entail.
26. What qualities do you believe are important to have as a manager?
Great managers tend to empower their employees to be successful through strong coaching. They understand how to manage relationships - this is commonly referred to emotional intelligence. They have to be able to handle both client and staff situations that require them to be calm under pressure to clearly think of solutions to complex problems. Most importantly they must be able to articulate the vision to the team and inspire them to work together to collectively achieve that goal
27. What are your presentation skills like Regarding Machine Operator Drilling Plastics?
Make sure you share a story that demonstrates your presentation skills in front of many people. If you are really brave, offer to give a snippet of that presentation to the interviewer. This will definitely be different from what most people do.
28. What have you done to reduce costs, increase revenue, or save time?
Even if your only experience is an internship, you have likely created or streamlined a process that has contributed to the earning potential or efficiency of the practice. Choose at least one suitable example and explain how you got the idea, how you implemented the plan, and the benefits to the practice.
29. How do you feel about this company's vision?
First find out where the company envisions itself in 3-5 years. If you can't find the vision of the company, that's probably a big question mark on the company itself. Once you do, identify how those company's visions align to your personal values and goals and then articulate how tightly correlated that is to the interviewer. For example - this company wants to be the #1 provider of green technology in the world and I feel strongly about that vision because we've got a chance to collectively impact the world to become a greener society and save our clients at the same time!
30. What does success mean to you?
I am punctual, I always have excellent attendance on any job Regarding Machine Operator Drilling Plastics, I have a keen eye for both large and small details, and I am always finding ways to improve a process and shorten the length of time it takes to complete a project.
31. How important is a positive attitude to you?
Incredibly important. I believe a positive attitude is the foundation of being successful - it's contagious in the workplace, with our customers, and ultimately it's the difference maker.
32. What is your perception of taking on risk?
You answer depends on the type of company you're interviewing for. If it's a start up, you need to be much more open to taking on risk. If it's a more established company, calculated risks to increase / improve the business or minimal risks would typically be more in line.
33. Describe a time where you've failed and bounced back?
Share a story to describe this. For example: "I accidentally made the mistake of telling a customer I could deliver on a solution set on a certain date and then later found out our business partner couldn't do it on that time. I learned that I shouldn't rush into important decisions and promises like this and that I should always check with my counterparts first before committing to a statement of work."
34. What's been your biggest success to date?
Talk about a story / experience about how you achieved success and be sure to share details on the results and outcome. Have it highlight a strong characteristic such as leadership, work ethic and so forth.
35. What other companies are you interviewing at?
Be open and share if you are indeed interviewing elsewhere, but do it in a humble way. This way you don't seem arrogant and the interviewer knows your skills are valued by other companies. This also tends to make them want you more as they know they are competing for your services.
Use your knowledge of the job description to demonstrate how you are a suitable match for the role.
37. How do you handle your anger?
I don't get angry very easily but in the rare occasion that I do, I hold it in and act as though nothing is wrong.
38. What are you passionate about?
Ask yourself - what are your core passions that you wake up excited to act on each and every day? Ask yourself what makes you happy or drives you - is it helping others? Is it making money? Is it creating something? Is it about changing the world? Etc.
39. What challenges are you looking for in this position?
A typical interview question to determine what you are looking for your in next job, and whether you would be a good fit for the position being hired for, is “What challenges are you looking for in a position Regarding Machine Operator Drilling Plastics?” The best way to answer questions about the challenges you are seeking is to discuss how you would like to be able to effectively utilize your skills and experience if you were hired for the job. You can also mention that you are motivated by challenges, have the ability to effectively meet challenges, and have the flexibility and skills necessary to handle a challenging job. You can continue by describing specific examples of challenges you have met and goals you have achieved in the past.
40. What is your ideal working environment?
Describe your ideal working environment. Do you like flexibility with work hours? Do you like working in a cubicle or independently? Do you like to be micro managed or empowered? Do you like to work on your own or in a team? Do you like being driven by metrics in your role? How much responsibility do you want?
41. When was the last time something upset you at work? What did you do?
Almost everyone has an emotional moment related to work at some point - you're not alone. The key is to learn why you reacted that way and to focus not on the problem but HOW to resolve it. Another key component is to be aware of your emotional response so that you can learn to control it in the future in a calm way.
42. How much do you expect to get paid Regarding Machine Operator Drilling Plastics?
For this be prepared and research salary to find out what similar positions are paying in your area before you go to the interview. Try to find this information out before giving your salary expectations. You can and should provide a range instead of an exact number. But again, don't say any numbers you're not comfortable with because if the employer offers you a salary at the lowest end of your range, you don't have much to negotiate with when it comes to getting a higher salary.
43. What does quality work mean to you?
Quality work to be is about doing work to the require or set standard, which is very important when it comes to warehouse operations.
44. How would you motivate your team members to produce the best possible results?
Trying to create competitive atmosphere, trying to motivate the team as a whole, organizing team building activities, building good relationships amongst people.
45. What do you expect to be earning in 5 years Regarding Machine Operator Drilling Plastics?
Discuss how you expect yourself to be excellent at your job. Thus, it would be reasonable to expect pay that is based on the merit of your work.
46. How do you keep each member of the team involved and motivated?
Many managers mistakenly think that money is the prime motivator for their employees. However, according to surveys by several different companies, money is consistently ranked five or lower by most employees. So if money is not the best way to motivate your team, what is?
Employees' three most important issues according to employees are:
☛ Respect
☛ A sense of accomplishment
☛ Recognition
47. How have you changed in the last five years?
All in a nutshell. But I think I've attained a level of personal comfort in many ways and although I will change even more in the next 5-6 years I'm content with the past 6 and what has come of them.
48. How would you observe the level of motivation of your subordinates?
Choosing the right metrics and comparing productivity of everyone on daily basis is a good answer, doesn't matter in which company you apply for a supervisory role.
49. What do you look for in terms of culture -- structured or entrepreneurial?
A good answer is to discuss the importance of having both elements in a company Regarding Machine Operator Drilling Plastics. Structure is good to maintain a focus on priorities and making sure people are productive but having an entrepreneurial spirit can help cultivate new ideas that can truly help the company.
50. How do you ensure all of your work gets accomplished in a productive manner?
The key is to prioritize what's important in your work and to stay organized to accomplish the tasks. A strong work ethic also helps.
51. How long will it take for you to make a significant contribution?
First define significant contribution - once you do that - lay out a timeline plan in which you think you can achieve that.
52. How good are you at problem solving?
Describe the problem first and then discuss how you were able to fix it.
53. Give me an example of an emergency situation that you faced. How did you handle it?
There was a time when one of my employers faced the quitting of a manager in another country. I was asked to go fill in for him while they found a replacement and stay to train that person. I would be at least 30 days. I quickly accepted because I knew that my department couldn't function without me.
54. If I talked to your three biggest fans, who would they be and why?
If you can reference three professionals with executive titles (CXO, VP, Director, Manager), that carries a lot of weight. Make sure you highlight how you've helped them achieve their biggest objectives and how that's made them your fan.
55. What types of personalities do you work with best?
In the past, I have found it difficult to work with others who see themselves as better than others, who can take criticism, and who refuse to work with others. I have found it challenging to work with them b/c I am a team oriented person who feels the importance of working together over the needs of the individual especially in a learning environment.
56. What do you know about this department?
One good way to find out about the department is to try to "informally" interview the existing employees over coffee (outside of the office) if possible. It's hard if you don't have any connections there, but if you do a great way to learn about it. Other than that, it's often hard to learn about the department so you can turn the table back on them by asking questions to learn about it.
57. Why do you want to work Regarding Machine Operator Drilling Plastics for this organisation?
Being unfamiliar with the organisation will spoil your chances with 75% of interviewers, according to one survey, so take this chance to show you have done your preparation and know the company inside and out. You will now have the chance to demonstrate that you've done your research, so reply mentioning all the positive things you have found out about the organisation and its sector etc. This means you'll have an enjoyable work environment and stability of employment etc – everything that brings out the best in you.
58. What problems have you encountered at work?
Wow, do we have problems! Where do I begin? Well, most of the problems are internal, just people not working well with each other. I have one person on our team who is a real problem, but it seems like management is afraid to do anything about it. So we all end up having to do extra work to cover for this person, who just doesn't work. We all say that he's retired in place. I think he's just holding on until retirement in a couple years. But he's a real problem. I complain about it--a lot--but nothing ever seems to get done. I've even written negative reviews about the person, hoping he will get canned, but it doesn't happen. I can't wait for him to retire.
59. Do you have good computer skills?
It is becoming increasingly important for medical assistants to be knowledgeable about computers. If you are a long-time computer user with experience with different software applications, mention it. It is also a good idea to mention any other computer skills you have, such as a high typing rate, website creation, and more.
60. What does "thinking outside the box" mean to you?
It means not doing things exactly the same way as everyone else. You've got to challenge the status quo and bring something new to the business.
61. What's a time you exercised leadership?
Depending on what's more important for the the role, you'll want to choose an example that showcases your project management skills (spearheading a project from end to end, juggling multiple moving parts) or one that shows your ability to confidently and effectively rally a team. And remember: “The best stories include enough detail to be believable and memorable,”. Show how you were a leader in this situation and how it represents your overall leadership experience and potential.
62. Do you think a leader should be feared or liked?
Liked. You want to work harder for people that inspire and motivate you. Fear only lasts for so long.
