1. How do you prioritize your work?
Depends on the situation... I like to label certain tasks as either A B or C...A being the one that requires immediate attention, and C which are tasks that aren't urgent but eventually need to get done... I like to focus my work As Pottery Mould Maker on the things that need to get done, and done quickly... While balancing the other work alongside our first priorities.
2. What are your weaknesses for Pottery Mould Maker position?
Try not to be too critical when answering this question. Instead, pick one of your weaknesses and try to turn it into a positive.
For example, you could be a perfectionist, which means that you sometimes take longer on tasks, but you make sure that they are completed to a high quality. It is important to make a negative into a positive as it doesn't make you appear overly critical and shows you can reflect on your own performance.
3. Tell me about a time when you successfully handled a situation?
For this question, the interviewer wants to know what you do in a situation that doesn't have a clear answer. This will help the interviewer know how you respond to unforeseen challenges.
Do not show your fear or uneasiness in handling pressure. Everyone likes to have a worker who can handle pressure calmly and with a clear train of thought. Show how you would logically come to a conclusion in a pressure filled situation.
5. Are you willing to work in shifts?
If the job calls for shifts that vary, be ready to do that for your work. If you aren't open to that, then explain why and see if they can adjust it for you.
6. How would your references describe you?
Think of three major characteristics that demonstrate your best qualities related to work and then have quick stories to describe why.
7. Describe what a "lot of work" looks like to you As Pottery Mould Maker?
Ideally you'd like to state that you can take on a lot of work - this shows your work ethic, but at the same time it's okay to tell them that you value work and life balance.
8. What have you learned from mistakes on this job?
Candidates without specific examples often do not seem credible. However, the example shared should be fairly inconsequential, unintentional, and a learned lesson should be gleaned from it. Moving ahead without group assistance while assigned to a group project meant to be collaborative is a good example.
In many scenarios, you will not have all the information needed. The key is to make the best possible decision based on what you deem to be a sufficient amount of information.
10. What did you dislike about your old job?
Try to avoid any pin point , like never say “I did not like my manager or I did not like environment or I did not like team” Never use negative terminology. Try to keep focus on every thing was good As Pottery Mould Maker , I just wanted to make change for proper growth.
11. Explain me what do you know about our company?
Bad Answer: They don't know much about the company. If a candidate is serious and enthusiastic, they should have done some basic research.
Good answer: An answer that shows they've really done their homework and know what the company does, any important current events that involve the company, and the work culture.
12. If you could do it all over again, how would you plan your academic studies differently?
Whatever you do, just don't act bitter. A lot of times we wish we could change the past, but focus on the positive reasons and results of the decisions you already made.
13. Top 12 Stress Based Interview Questions As Pottery Mould Maker:
Some jobs require employees to work under stress, and some interviewers just like to see how applicants handle stressful questions.
There are many questions designed for putting the interviewee into an awkward situation, or throwing them off, to see how they do under stress. Here are some samples.
1. How do you feel this interview is going As Pottery Mould Maker?
2. How would you handle undeserved criticism from a superior?
3. How many other jobs are you applying for?
4. What would you do if you saw a colleague stealing supplies or equipment?
5. What did you do when you had a boss you didn't get along with?
6. What would you do if a colleague took credit for your idea, and got a promotion?
7. Was the stress of your previous job too much for you?
8. What would you do if a colleague admitted to lying on their resume to get the job?
9. What would you do if a customer verbally insulted you in front of co-workers?
10. What would you change about the design of a baseball hat?
11. Why were you fired from your previous job As Pottery Mould Maker?
12. How successful do you think you've been so far?
14. How do you evaluate success As Pottery Mould Maker?
I evaluate success As Pottery Mould Maker in different ways. At work, it is meeting the goals set by my supervisors and my fellow workers. It is my understanding, from talking to other employees, that the Global Guideline company is recognized for not only rewarding success but giving employees opportunity to grow as well.
15. What specific steps do you utilize in solving workplace problems?
Analyze the problem As Pottery Mould Maker. Discuss possible remedies and resulting outcomes. Decide on the remedy and track results. Re-visit problem if it's not resolved.
16. Top 12 Best Brainteaser Interview Questions:
Brainteaser questions As Pottery Mould Maker have become popular for interviews in recent years, as word has gotten out that top tech companies such as Apple, Google, Microsoft and IBM have used this type of question at one time or another.
Companies like Google aren't using these questions so much any more, but many companies, are, and it may be good to prepare for them As Pottery Mould Maker. The key to these isn't so much getting the exact answer, as it is showing how you would come up with an answer.
Here's a sample of 12 of the best and most difficult.
1. How many street lights are there in New York City?
2. How many gas stations are there in the United States?
3. How many golf balls can fit in a school bus?
4. How much should you charge to wash all the windows in Seattle?
5. Why are manhole covers round?
6. How many times a day does a clock's hands overlap?
7. How would you test a calculator?
8. Describe the internet to someone who just woke up from a 30-year coma.
9. How much does the Starbucks in Times Square bring in, in annual revenue?
10. You are shrunk to the height of a nickel and thrown into a blender. Your mass is reduced so that your density is the same as usual. The blades start moving in 60 seconds. What do you do?
11. What is the air speed velocity of an unladen swallow? ;)
12. How many golf balls are there in Florida?
17. Tell me a difficult situation you have overcome in the workplace?
Conflict resolution, problem solving, communication and coping under pressure are transferable skills desired by many employers As Pottery Mould Maker.
Answering this question right can help you demonstrate all of these traits.
☛ Use real-life examples from your previous roles that you are comfortable explaining
☛ Choose an example that demonstrates the role you played in resolving the situation clearly
☛ Remain professional at all times – you need to demonstrate that you can keep a cool head and know how to communicate with people
18. What do you like to do for fun?
Be open to sharing hobbies and activities that you enjoy. Make sure you're genuine about it and don't list off things you don't really like because if they ask you a follow up question it'll be harder for you to answer.
This is where the interviewer tries to turn the tables on you. Answer confidently by stating 3 specific traits that are applicable to that job role. For example, a consulting job would likely look for someone who can think outside of the box.
After answering, ask them, "Am I spot on here and if not, what traits would you look for?"
20. What kind of work interests you the least As Pottery Mould Maker?
What bores you? What fails to challenge you? What fails to excite you?
21. What are the goals you've set for yourself?
You could discuss your goals with regards to these categories: Career goals, impact you want to leave on society, financial goals, academic goals, charitable goals.
22. Are you currently looking at other job opportunities?
Just answer this question honestly. Sometime an employer wants to know if there are other companies you're considering so that they can determine how serious you are about the industry, they're company and find out if you're in demand. Don't spend a lot of time on this question; just try to stay focused on the job you're interviewing for.
23. What have you done to improve your knowledge As Pottery Mould Maker in the last year?
Try to include improvement activities that relate to the job As Pottery Mould Maker. A wide variety of activities can be mentioned as positive self-improvement. Have some good ones handy to mention.
24. How open are you to relocation?
If you're not, then say you're not. Don't lie about it just to get the job. There's no point if you won't move for the job anyway and lying is unethical. If you are open to relocation As Pottery Mould Maker, let them know which areas you'd be willing to relocate to.
25. Give me a few examples of how you're results oriented?
Make you give an example where you discuss details and metrics. For example, I was a tutor in my last job and mentored 5 students on their SAT test taking skills and raised their scores by 15% on average after a 3 month teaching stint.
26. Where do you see yourself in five years As Pottery Mould Maker?
If asked this question, be honest and specific about your future goals, but consider this:
A hiring manager wants to know
☛ a) if you've set realistic expectations for your career,
☛ b) if you have ambition (a.k.a., this interview isn't the first time you're considering the question), and
☛ c) if the position aligns with your goals and growth. Your best bet is to think realistically about where this position could take you and answer along those lines. And if the position isn't necessarily a one-way ticket to your aspirations?
It's OK to say that you're not quite sure what the future holds, but that you see this experience playing an important role in helping you make that decision.
27. Are You a ‘People' Person?
Although it may be phrased a little differently, the gist of this question is clear:
Do you like being around people? If you don't, being a medical assistant isn't a good fit for you. After all, you'll be working directly with patients throughout the day. It helps a lot if you sincerely like interacting with them. While answering this question, make sure to mention that you like helping people too. This will drive home the point that you are a talented medical assistant and would be a valuable part of the team As Pottery Mould Maker.
In asking this interview question, your interviewer wants to get a sense of how you will respond to conflict. Anyone can seem nice and pleasant in a job interview, but what will happen if you're hired?. Again, you'll want to use the S-T-A-R method, being sure to focus on how you handled the situation professionally and productively, and ideally closing with a happy ending, like how you came to a resolution or compromise.
29. What will your ramp time be before you become a meaningful contributor?
Companies want staff that can ramp quickly, but also want people who are realistic. So take into consideration how intense the job is and then give a good answer. For example, if you have simple responsibilities that don't require a huge development curve, then your ramp time will probably be shorter. If it's a complex set of skills that you need to develop, then your ramp time could be longer - the key is you have to explain why you believe that ramp time should be.
30. What are your presentation skills like As Pottery Mould Maker?
Make sure you share a story that demonstrates your presentation skills in front of many people. If you are really brave, offer to give a snippet of that presentation to the interviewer. This will definitely be different from what most people do.
31. What do you consider to be your weaknesses?
What your interviewer is really trying to do with this question-beyond identifying any major red flags-is to gauge your self-awareness and honesty. So, “I can't meet a deadline to save my life As Pottery Mould Maker” is not an option-but neither is “Nothing! I'm perfect!” Strike a balance by thinking of something that you struggle with but that you're working to improve. For example, maybe you've never been strong at public speaking, but you've recently volunteered to run meetings to help you be more comfortable when addressing a crowd.
32. What is your biggest fear?
Don't try to sugarcoat the answer by listing something ambitious as a fear, unless you truly mean it (for example: I fear being a great leader) - Share your real fears but discuss how you would overcome them.
33. How do you handle conflicts with people you supervise?
At first place, you try to avoid conflicts if you can. But once it happens and there's no way to avoid it, you try to understand the point of view of the other person and find the solution good for everyone. But you always keep the authority of your position.
34. What do you know about our competition?
Make sure you do your research on their competitors. You can find this by going to yahoo finance and click on their competitors (if they are public). From there research the news on them and go to their websites to understand their positioning on solutions and vision. You can also research local regional companies that are their competition (if it's a smaller private company on a regional scale) by simply typing in similar product offerings in the Google search followed by the city. Make sure you know their competitor's vision, products, culture, and how they are differentiated against their competition (and if they're not, how they could be)
35. How would you estimate the weight of the Chrysler building?
This is a process guesstimate where the interviewer wants to know if you know what to ask. First, you would find out the dimensions of the building (height, weight, depth). This will allow you to determine the volume of the building. Does it taper at the top? (Yes.) Then, you need to estimate the composition of the Chrysler building. Is it mostly steel? Concrete? How much would those components weigh per square inch? Remember the extra step: find out whether you're considering the building totally empty or with office furniture, people, etc. If you're including the contents, you might have to add 20 percent or so to the building's weight.
36. How has school prepared you for this job role?
Think back to how you've interacted with your peers to develop social skills, how you've worked with classmates on projects to develop teamwork and collaborative skills, how you've developed discipline through studying, how the courses have helped your creativity, and how the classes you've taken have impacted your analytical / problem solving / reasoning skills.
37. Describe a time where you've failed and bounced back?
Share a story to describe this. For example: "I accidentally made the mistake of telling a customer I could deliver on a solution set on a certain date and then later found out our business partner couldn't do it on that time. I learned that I shouldn't rush into important decisions and promises like this and that I should always check with my counterparts first before committing to a statement of work."
38. Where do you see yourself in 5 years with your career?
Be sure to paint a clear picture of your career vision that demonstrates your aspirations and goals that are realistic. This could emphasize increased responsibility, the ability to manage people and so forth
39. What does success mean to you?
I am punctual, I always have excellent attendance on any job As Pottery Mould Maker, I have a keen eye for both large and small details, and I am always finding ways to improve a process and shorten the length of time it takes to complete a project.
One of employees was conflicting with other and colleague who was prove his was wrong hi denied and was invite union to defend him but we have prove his wrong and I was facing disciplinary action.
41. How have you shown yourself to be a leader?
Think about a time where you've rallied a group of people around a cause / idea / initiative and successfully implemented it. It could be a small or large project but the key is you want to demonstrate how you were able to lead others to work for a common cause.
42. How long do you envision yourself staying with this company?
Understand that companies invest a lot of money into hiring the right staff. You want to emphasize that you are in it for the long run and you want to develop a career there and that it's not just a "5 month stepping stone" type of a job. You should be thinking how you're going to grow with that company. After all, don't you want to invest your energy and time with a company that is going to continue to be successful and one that will help you grow?
43. How will you approach learning this "new" job As Pottery Mould Maker?
Interview peers and leaders/managers, read industry news, practice the skill sets needed, absorb information on the job as much as possible.
44. Why are manhole covers round?
This is a classic brainteaser, which was reportedly first asked by a Microsoft interviewer. Here's how to ""solve"" this brainteaser (remember to speak and reason out loud while solving this brainteaser): Why are manhole covers round? Could there be a structural reason? Why aren't manhole covers square? It would make it harder to fit with a cover. You'd have to rotate it exactly the right way.
The pipes below are also round, so fitting them might be easier, as might be making them. So many manhole covers are round because they don't need to be rotated. There are no corners to deal with. Also, a round manhole cover won't fall into a hole because it was rotated the wrong way, so it's safer. Looking at this, it seems corners are a problem. You can't cut yourself on a round manhole cover. And because it's round, it can be more easily transported. One person can roll it.
45. In what areas do you think you will need guidance?
Think about what you need to learn going into the job. Skill sets, industry knowledge, relationship building, team dynamics. Which areas are ones you're lacking?
46. If someone had to say something negative to you, what would they say?
Again, be honest about sharing a story here about someone who may not have gotten along with you in the office here and explain how you were able to fix that relationship or change your attitude/action to be a better person / coworker.
47. Describe a typical work week for this position As Pottery Mould Maker?
Interviewers expect a candidate for employment to discuss what they do while they are working in detail. Before you answer, consider the position As Pottery Mould Maker you are applying for and how your current or past positions relate to it. The more you can connect your past experience with the job opening, the more successful you will be at answering the questions.
48. Tell me something about your family background?
First, always feel proud while discussing about your family background. Just simple share the details with the things that how they influenced you to work in an airline field.
49. What is your desired salary As Pottery Mould Maker?
Bad Answer: Candidates who are unable to answer the question, or give an answer that is far above market. Shows that they have not done research on the market rate, or have unreasonable expectations.
Good answer: A number or range that falls within the market rate and matches their level of mastery of skills required to do the job.
50. What are your salary expectations As Pottery Mould Maker?
This question is like a loaded gun, tricky and dangerous if you're not sure what you are doing. It's not uncommon for people to end up talking salary before really selling their skills, but knowledge is power as this is a negotiation after all. Again, this is an area where doing your research will be helpful as you will have an understanding of average salary.
One approach is asking the interviewer about the salary range, but to avoid the question entirely, you can respond that money isn't a key factor and you're goal is to advance in your career. However, if you have a minimum figure in mind and you believe you're able to get it, you may find it worth trying.
51. What's your salary history?
When you are interviewing for a new job, it is common practice for the company to ask you about your salary history. I typically want to know what the candidate's base salary is, if they receive any bonus, the average bonus amount, and any additional compensation or perks, such as 500k matching, stock grants or stock options, paid time off and how much they are required to pay towards their medical premiums.
52. Give an example of a time you successfully worked As Pottery Mould Maker on a team?
On the whole I prefer to stick to doing what I'm told rather than setting myself up to fail by doing things off my own bat. But there was this one time when I suggested to my boss at the pizza parlor that she try offering an ‘all you can eat' deal to students to boost trade on Mondays. She thought it was an interesting idea but nothing ever came of it.
Fully understand my responsibilities, work hard and exceed expectations, learn as much as possible, help others as much as possible, understand what my teammates' goals and needs are, be on time, and gain a mentor.
54. How would you define success?
Success is defined differently for everybody. Just make sure the parameters are defined by you with regards to work life balance, financial gain, career growth, achievements, creating meaningful work / products and so forth. If you can clearly articulate what it means to you that is a strong answer.
55. Do you think a leader should be feared or liked?
Liked. You want to work harder for people that inspire and motivate you. Fear only lasts for so long.
56. How would you motivate your team members to produce the best possible results?
Trying to create competitive atmosphere, trying to motivate the team as a whole, organizing team building activities, building good relationships amongst people.
57. How do you think I rate as an interviewer?
I think you did fine. I'm sure you've conducted a lot of interviews, and it's probably second nature for you now. Thanks for taking the time to meet with me today. I'm sure you have a lot of things you have to juggle every day.
I'd say you rate at least ten out of ten. The questions you asked seemed spot on. I can tell you guys are working hard to find the perfect applicant for the job. I'm glad I could meet with you.
58. How would your friends describe you?
My friends would probably say that I'm extremely persistent – I've never been afraid to keep going back until I get what I want. When I worked as a program developer, recruiting keynote speakers for a major tech conference, I got one rejection after another – this was just the nature of the job. But I really wanted the big players – so I wouldn't take no for an answer. I kept going back to them every time there was a new company on board, or some new value proposition. Eventually, many of them actually said "yes" – the program turned out to be so great that we doubled our attendees from the year before. A lot of people might have given up after the first rejection, but it's just not in my nature. If I know something is possible, I have to keep trying until I get it.
59. What kind of salary do you need As Pottery Mould Maker?
This is a loaded question and a nasty little game that you will probably lose if you answer first. So, do not answer it. Instead, say something like, that's a tough question. Can you tell me the range for this position? In most cases, the interviewer, taken off guard, will tell you. If not, say that it can depend on the details of the job. Then give a wide range.
It should say the same thing - after all - if you think this salary is fair then it should suit the responsibilities!
61. What does "thinking outside the box" mean to you?
It means not doing things exactly the same way as everyone else. You've got to challenge the status quo and bring something new to the business.
62. What features of your previous jobs have you disliked?
It's easy to talk about what you liked about your job in an interview, but you need to be careful when responding to questions about the downsides of your last position. When you're asked at a job interview about what you didn't like about your previous job, try not to be too negative. You don't want the interviewer to think that you'll speak negatively about this job or the company should you eventually decide to move on after they have hired you.
63. What's the least rewarding work you've ever done and why?
Describe work you've done that you feel doesn't take advantage of your full potential. For example, "I once had to make paper copies for my job and I feel it didn't take full advantage of my skills. However, it did teach me to be humble in my work and to appreciate a good opportunity when it arose to use my skills"
Both are important. You need to stress that. However, if you could only choose one, ask yourself As Pottery Mould Maker - do you like to be "in the weeds" with your work, or do you want to be the one painting the vision?
65. How do you ensure all of your work gets accomplished in a productive manner?
The key is to prioritize what's important in your work and to stay organized to accomplish the tasks. A strong work ethic also helps.
66. Do you have any question regarding this job As Pottery Mould Maker?
Never ask Salary, perks, leave, place of posting, etc. regarded questions. Try to ask more about the company to show how early you can make a contribution to your organization like. “Sir, with your kind permission I would like to know more about induction and developmental programs?” OR Sir, I would like to have my feedback, so that I can analyze and improve my strengths and rectify my shortcomings.
67. What was the biggest professional risk you have taken and what was the outcome?
First discuss how you weighed the pros and cons of the risk and the results you'd believe you could achieve. Then discuss the action plan you put into place for it and outline that step by step. Then discuss the outcome and if it wasn't optimal talk about what you would do differently in hindsight.
68. What do you know about this department?
One good way to find out about the department is to try to "informally" interview the existing employees over coffee (outside of the office) if possible. It's hard if you don't have any connections there, but if you do a great way to learn about it. Other than that, it's often hard to learn about the department so you can turn the table back on them by asking questions to learn about it.
69. Where do you see yourself professionally five years from now As Pottery Mould Maker?
Demonstrate both loyalty and ambition in the answer to this question. After sharing your personal ambition, it may be a good time to ask the interviewer if your ambitions match those of the company.
70. How do you act when you encounter competition?
This question is designed to see if you can rise the occasion. You want to discuss how you are the type to battle competition strongly and then you need to cite an example if possible of your past work experience where you were able to do so.
