You want to first understand why the policy was put into effect. From there, if you truly disagree with it, explain your position to your management. If they don't change it, then you must accept their decision and continue to work or the alternative decision would be to find a new job.
Discuss your work experiences. The key is to show you're calm under pressure and can handle sensitive situations with a clear train of thought.
3. What kind of work interests you the least As CNC Programmer (Computerized Numerical Control Pro?
What bores you? What fails to challenge you? What fails to excite you?
4. How would your boss and co-workers describe you?
First of all, be honest (remember, if you get this job, the hiring manager will be calling your former bosses and co-workers!). Then, try to pull out strengths and traits you haven't discussed in other aspects of the interview As CNC Programmer (Computerized Numerical Control Pro, such as your strong work ethic or your willingness to pitch in on other projects when needed.
Have at least one person you consider a hero or role model. Be ready to explain why they are a hero to you and how they've inspired you to be a better person.
6. How do you handle confidentiality in your work?
Often, interviewers will ask questions to find out the level of technical knowledge As CNC Programmer (Computerized Numerical Control Pro that a candidate has concerning the duties of a care assistant. In a question such as this, there is an opportunity to demonstrate professional knowledge and awareness. The confidentiality of a person's medical records is an important factor for a care assistant to bear in mind.
7. What has disappointed you about a previous job?
Again, this question could get you in trouble so tread carefully. Some good answers might be that your previous job didn't provide any room for growth, that you were laid off due to a mandatory reduction in staff, that they closed their office in your state and required you to relocate, etc. Make sure not to mention anything negative about the people you worked with, the company in general or the job itself.
Take a break to rest. Work in smaller increments of time to increase focus with breaks in between. Delegate tasks to those that are willing to help.
9. Describe your management style?
Try to avoid specific classifications, whatever it may be. Organizations usually prefer managers who can adapt their skills to different situations.
10. Are you currently looking at other job opportunities?
Just answer this question honestly. Sometime an employer wants to know if there are other companies you're considering so that they can determine how serious you are about the industry, they're company and find out if you're in demand. Don't spend a lot of time on this question; just try to stay focused on the job you're interviewing for.
It's important that you demonstrate that you can adapt to changing environments quickly. You want to stress that you can manage change. The one thing in life that is constant after all, is change.
12. Why are you leaving last job?
Although this would seem like a simple question, it can easily become tricky. You shouldn't mention salary being a factor at this point As CNC Programmer (Computerized Numerical Control Pro. If you're currently employed, your response can focus on developing and expanding your career and even yourself. If you're current employer is downsizing, remain positive and brief. If your employer fired you, prepare a solid reason. Under no circumstance should you discuss any drama or negativity, always remain positive.
13. Top 12 Stress Based Interview Questions As CNC Programmer (Computerized Numerical Control Pro:
Some jobs require employees to work under stress, and some interviewers just like to see how applicants handle stressful questions.
There are many questions designed for putting the interviewee into an awkward situation, or throwing them off, to see how they do under stress. Here are some samples.
1. How do you feel this interview is going As CNC Programmer (Computerized Numerical Control Pro?
2. How would you handle undeserved criticism from a superior?
3. How many other jobs are you applying for?
4. What would you do if you saw a colleague stealing supplies or equipment?
5. What did you do when you had a boss you didn't get along with?
6. What would you do if a colleague took credit for your idea, and got a promotion?
7. Was the stress of your previous job too much for you?
8. What would you do if a colleague admitted to lying on their resume to get the job?
9. What would you do if a customer verbally insulted you in front of co-workers?
10. What would you change about the design of a baseball hat?
11. Why were you fired from your previous job As CNC Programmer (Computerized Numerical Control Pro?
12. How successful do you think you've been so far?
14. You notice there are too many non productive internal meetings being held, what do you do?
Reach out to your boss and let him know that first you value his leadership and organization but that you are being overwhelmed with the amount of non productive internal meetings.
15. Top 13 Situational Interview Questions As CNC Programmer (Computerized Numerical Control Pro:
Situational interviews As CNC Programmer (Computerized Numerical Control Pro are similar to behavioral interview questions - but they are focused on the future, and ask hypothetical questions, whereas behavioral interview questions look at the past.
The advantage is that employers can put all candidates in the same hypothetical situations, and compare their answers.
1. What would you do if you made a strong recommendation in a meeting, but your colleagues decided against it?
2. How you would handle it if your team resisted a new idea or policy you introduced?
3. How would you handle it if the priorities for a project you were working on were suddenly changed?
4. What would you do if the work of an employee you managed didn't meet expectations?
5. What would you do if an important task was not up to standard, but the deadline to complete it had passed?
6. What steps would you take to make an important decision on the job As CNC Programmer (Computerized Numerical Control Pro?
7. How would you handle a colleague you were unable to form a positive relationship with?
8. What would you do if you disagreed with the way a manager wanted you to handle a problem?
9. What would you do if you were assigned to work with a difficult client As CNC Programmer (Computerized Numerical Control Pro?
10. What would you do if you worked hard on a solution to a problem, and your solution was criticized by your team?
11. How would you handle working closely with a colleague who was very different from you?
12. You're working on a key project that you can't complete, because you're waiting on work from a colleague. What do you do?
13. You realize that an early mistake in a project is going to put you behind deadline. What do you do?
16. When were you most satisfied in your job As CNC Programmer (Computerized Numerical Control Pro?
I'm a people person. I was always happiest and most satisfied when I was interacting with community residents, making sure I was able to meet their needs and giving them the best possible comfort in a tough situation. It was my favorite part of the job, and it showed. Part of the reason I'm interested in this job is that I know I'd have even more interaction with the public, on an even more critical level.
17. Name five characteristics that describe you?
Here are a few you could choose from:
Hard working, strong willed, persistent, intelligent, adept, amicable, friendly, collaborative, eager, humble.
18. Explain me what do you know about our company?
Bad Answer: They don't know much about the company. If a candidate is serious and enthusiastic, they should have done some basic research.
Good answer: An answer that shows they've really done their homework and know what the company does, any important current events that involve the company, and the work culture.
Bad Answer: They don't have a good reason, or provide a generic answer, "I think it represents a great opportunity."
Good answer: One that shows they've done research on the company, and are truly excited about specific things they can do at the job. This not only shows enthusiasm for the work and basic preparation skills, gives you clues about the cultural fit.
In many scenarios, you will not have all the information needed. The key is to make the best possible decision based on what you deem to be a sufficient amount of information.
21. Are you able to relocate if required?
Be completely honest and thoughtful with this one. You don't want to wake up one to find out that you're moving to a new city or state and it may be a major factor in your eligibility for employment. But again, if you don't want to move then the job probably isn't for you.
22. Describe a time when you anticipated potential problems and developed preventive measures?
The key here is to show that you were proactive. How did you find out about the potential problems? How did you address it quickly?
23. Tell me about a time when you helped resolve a dispute between others?
Be sure to discuss a very specific example. Tell the interviewer what methods you used to solve the problem without focusing on the details of the problem.
When answering this question, we recommends being accurate (share your true strengths, not those you think the interviewer wants to hear); relevant (choose your strengths that are most targeted to this particular position As CNC Programmer (Computerized Numerical Control Pro); and specific (for example, instead of “people skills,” choose “persuasive communication” or “relationship building”). Then, follow up with an example of how you've demonstrated these traits in a professional setting.
25. What makes you right for this position?
This question can be tricky because you need to show your worth As CNC Programmer (Computerized Numerical Control Pro without sounding cocky or arrogant. Research the business ahead of time and become familiar with its mission and values. Take the time to figure out how your personal qualities fit the needs of the business and use that fit to provide your answer.
26. What is your perception of taking on risk?
You answer depends on the type of company you're interviewing for. If it's a start up, you need to be much more open to taking on risk. If it's a more established company, calculated risks to increase / improve the business or minimal risks would typically be more in line.
27. What do you like to do outside of work?
Interviewers ask personal questions in an interview to “see if candidates will fit in with the culture [and] give them the opportunity to open up and display their personality, too,”. In other words, if someone asks about your hobbies outside of work, it's totally OK to open up and share what really makes you tick. (Do keep it semi-professional, though: Saying you like to have a few beers at the local hot spot on Saturday night is fine. Telling them that Monday is usually a rough day for you because you're always hungover is not.)
28. What are three positive characteristics you wish you had?
The key here is to be honest about your wish list but then to describe how you plan on developing or growing those characteristics so that it becomes a reality. For example, I wish I had a stronger work ethic and I am reading a book right now about how to instill a better discipline around getting work done efficiently.
Use your knowledge of the job description to demonstrate how you are a suitable match for the role.
There could be a multitude of things to discuss here: Business ethics (wrongdoing), inconsiderate teammates, non-supportive management, a product that does not do what you're promising customers and so forth.
31. In what areas do you think you will need guidance?
Think about what you need to learn going into the job. Skill sets, industry knowledge, relationship building, team dynamics. Which areas are ones you're lacking?
Discuss how you prioritize your work initiatives based on the company initiatives. For example, if you're in customer service discuss how you're focused on providing the best customer experience.
33. What are ideas or initiatives you've led and what was the outcome?
Describe your most unique ideas and initiatives that had the best results for the company. Make sure you highlight your creativity, your results, your diligence and your ability to execute.
34. How do you deal with pressure or stressful situations?
Choose an answer that shows that you can meet a stressful situation head-on in a productive, positive manner and let nothing stop you from accomplishing your goals. A great approach is to talk through your go-to stress-reduction tactics (making the world's greatest to-do list, stopping to take 10 deep breaths), and then share an example of a stressful situation you navigated with ease.
35. What are your lifelong dreams?
If your dreams don't relate to the job closely, make sure you highlight aspects of the job that will help develop the skills that will help you with your dreams. Ideally, you want your dreams to relate strongly to the career path you're interviewing for though.
36. Can you perform Internet research? Please describe to me your steps in doing so?
Internet research can entail Google searches, industry sites, news articles, social networks and company websites.
37. How do you feel about technology at the workplace in general?
It's a great enabler for us to collaborate better as a team, for us to reach customers more efficiently and frequently and I believe it can help any company become more efficient, leaner, and more productive.
38. Why are you the best fit for this job As CNC Programmer (Computerized Numerical Control Pro?
Analyze the job responsibilities and match those to your skills sets. Then discuss how your experience and skills sets can truly create the best impact to the company in that specific job role. Impact could mean marketing impressions, sales, cutting costs, making products more efficiently, creating better customer service, engineering new designs that create customer excitement, etc.
39. Where do you see yourself in five years As CNC Programmer (Computerized Numerical Control Pro?
If asked this question, be honest and specific about your future goals, but consider this:
A hiring manager wants to know
☛ a) if you've set realistic expectations for your career,
☛ b) if you have ambition (a.k.a., this interview isn't the first time you're considering the question), and
☛ c) if the position aligns with your goals and growth. Your best bet is to think realistically about where this position could take you and answer along those lines. And if the position isn't necessarily a one-way ticket to your aspirations?
It's OK to say that you're not quite sure what the future holds, but that you see this experience playing an important role in helping you make that decision.
40. How has school prepared you for this job role?
Think back to how you've interacted with your peers to develop social skills, how you've worked with classmates on projects to develop teamwork and collaborative skills, how you've developed discipline through studying, how the courses have helped your creativity, and how the classes you've taken have impacted your analytical / problem solving / reasoning skills.
41. What skills do you bring to the table?
Think of your skill sets with regards to: analytical skills, interpersonal skills, communication skills, computer skills, presentation skills, management skills, sales skills and so forth.
42. What qualities do you believe are important to have as a manager?
Great managers tend to empower their employees to be successful through strong coaching. They understand how to manage relationships - this is commonly referred to emotional intelligence. They have to be able to handle both client and staff situations that require them to be calm under pressure to clearly think of solutions to complex problems. Most importantly they must be able to articulate the vision to the team and inspire them to work together to collectively achieve that goal
43. What do you consider to be your weaknesses?
What your interviewer is really trying to do with this question-beyond identifying any major red flags-is to gauge your self-awareness and honesty. So, “I can't meet a deadline to save my life As CNC Programmer (Computerized Numerical Control Pro” is not an option-but neither is “Nothing! I'm perfect!” Strike a balance by thinking of something that you struggle with but that you're working to improve. For example, maybe you've never been strong at public speaking, but you've recently volunteered to run meetings to help you be more comfortable when addressing a crowd.
44. Why do you want to work in this industry As CNC Programmer (Computerized Numerical Control Pro?
Make sure you research the industry first. Then find at least 3 core things about that industry that you're passionate about (for example: how their solutions impact clients, their culture, the leadership, etc)
45. What's been your biggest success to date?
Talk about a story / experience about how you achieved success and be sure to share details on the results and outcome. Have it highlight a strong characteristic such as leadership, work ethic and so forth.
46. How would you impact the company?
Consider first the role that you're applying for and then think of 3 ways where you could potentially impact the company's bottom line and top line. Then consider how you impact the company in a creative manner (how do you help productivity, the development of new products, marketing etc - of course this part is specific to the role you're applying for)
This answer depends on whether or not the job has a lot of repetitive tasks with no variation. If it does, then you would need to be okay with the idea of doing the same task over and over again. If you feel you can offer more than repetitive work, then describe how you would be able to do so.
48. What type of mentors do you seek out and why?
Think of your top 3 mentors and what attributes they exhibit that you want to emulate. Common attributes include passion, desire, will, leadership, ability to influence others, intelligence.
49. What challenges are you looking for in this position?
A typical interview question to determine what you are looking for your in next job, and whether you would be a good fit for the position being hired for, is “What challenges are you looking for in a position As CNC Programmer (Computerized Numerical Control Pro?” The best way to answer questions about the challenges you are seeking is to discuss how you would like to be able to effectively utilize your skills and experience if you were hired for the job. You can also mention that you are motivated by challenges, have the ability to effectively meet challenges, and have the flexibility and skills necessary to handle a challenging job. You can continue by describing specific examples of challenges you have met and goals you have achieved in the past.
50. What type of personalities do you work best with and why?
Think of which personalities you work best with (do you like outgoing, collaborative, personable working relationships and so forth?)
These are important for support workers. But they differ from the communication skills of a CEO or a desktop support technician. Communication must be adapted to the special ways and needs of the clients. Workers must be able to not only understand and help their clients, but must project empathy and be a warm, humane presence in their lives.
52. What general trends do you see in our industry?
Examine what's happened in the industry in the last 5 - 10 years and how it's evolved and then look at what both the company and analysts are saying about the future of that industry in which that company competes in. Read trade magazines / online sources in that industry as well to make sure you stay up to date on trends.
53. How do you handle stressful situations?
By remaining calm, weighing out all my options and executing a plan to get the situation resolve .
Demonstrate both loyalty and ambition in the answer to this question. After sharing your personal ambition, it may be a good time to ask the interviewer if your ambitions match those of the company.
55. What are your salary expectations As CNC Programmer (Computerized Numerical Control Pro?
This question is like a loaded gun, tricky and dangerous if you're not sure what you are doing. It's not uncommon for people to end up talking salary before really selling their skills, but knowledge is power as this is a negotiation after all. Again, this is an area where doing your research will be helpful as you will have an understanding of average salary.
One approach is asking the interviewer about the salary range, but to avoid the question entirely, you can respond that money isn't a key factor and you're goal is to advance in your career. However, if you have a minimum figure in mind and you believe you're able to get it, you may find it worth trying.
56. Explain an occasion when you had to adapt in the face of a difficult situation?
One of the most useful interview tactics is to remain positive about your work and achievements. This question lets the candidate draw on their own personal history to show how they have been positive and successful in the face of difficulties. Choose a specific occasion to describe, rather than dealing with generic platitudes.
57. How would you motivate your team members to produce the best possible results?
Trying to create competitive atmosphere, trying to motivate the team as a whole, organizing team building activities, building good relationships amongst people.
58. Do you have any questions for me?
Good interview questions to ask interviewers at the end of the job interview include questions on the company growth or expansion, questions on personal development and training and questions on company values, staff retention and company achievements.
59. Explain an idea that you have had and have then implemented in practice?
Often an interview guide will outline the so-called ‘STAR' approach for answering such questions; Structure the answer as a situation, task, action, and result: what the context was, what you needed to achieve, what you did, and what the outcome was as a result of your actions.
60. When was the last time something upset you at work? What did you do?
Almost everyone has an emotional moment related to work at some point - you're not alone. The key is to learn why you reacted that way and to focus not on the problem but HOW to resolve it. Another key component is to be aware of your emotional response so that you can learn to control it in the future in a calm way.
61. Do you like to start personal relationships with other employees?
Well, the right answer is yes and no. Good personal relations can improve the overall performance of a team. But on the other hand, you should not let your emotions to affect your decisions in work.
62. What was the biggest professional risk you have taken and what was the outcome?
First discuss how you weighed the pros and cons of the risk and the results you'd believe you could achieve. Then discuss the action plan you put into place for it and outline that step by step. Then discuss the outcome and if it wasn't optimal talk about what you would do differently in hindsight.
63. Why are you leaving your current job?
This is a toughie, but one you can be sure you'll be asked. Definitely keep things positive-you have nothing to gain by being negative about your past employers. Instead, frame things in a way that shows that you're eager to take on new opportunities and that the role you're interviewing for is a better fit for you than your current or last position. For example, “I'd really love to be part of product development from beginning to end, and I know I'd have that opportunity here.” And if you were let go? Keep it simple: “Unfortunately, I was let go,” is a totally OK answer.
Interviewers expect a candidate for employment to discuss what they do while they are working in detail. Before you answer, consider the position As CNC Programmer (Computerized Numerical Control Pro you are applying for and how your current or past positions relate to it. The more you can connect your past experience with the job opening, the more successful you will be at answering the questions.
I believe my biggest weakness As CNC Programmer (Computerized Numerical Control Pro is wanting to help anyone I can help. What I mean is I am willing to take on task that are not my job. I want to learn all I can. However, that has helped me get promoted or even asked to help in times of need in other department. I have been know as the "go to person" when help is needed.
66. Have you got any questions?
This is your final opportunity to persuade the interviewer that you are the right candidate for the job. Now is not the time to ask questions about holidays, pay or pensions – all these things can be asked later when you get an offer of employment. Now is the time to ask about any reservations that the interviewer may have about your suitability for the role. You will then give yourself one last chance to persuade the interviewer that you are the right candidate for the job.
Example Thank you. I think we have covered everything. Before we finish the interview I would like to take the opportunity to ask if you have any reservations about my suitability for this role?
67. What would you like to have accomplished by the end of your career?
Think of 3 major achievements that you'd like to accomplish in your job when all is said and done - and think BIG. You want to show you expect to be a major contributor at the company. It could be creating a revolutionary new product, it could be implementing a new effective way of marketing, etc.
68. Do you think a leader should be feared or liked?
Liked. You want to work harder for people that inspire and motivate you. Fear only lasts for so long.
69. How long will it take for you to make a significant contribution?
First define significant contribution - once you do that - lay out a timeline plan in which you think you can achieve that.
70. How would your friends describe you?
My friends would probably say that I'm extremely persistent – I've never been afraid to keep going back until I get what I want. When I worked as a program developer, recruiting keynote speakers for a major tech conference, I got one rejection after another – this was just the nature of the job. But I really wanted the big players – so I wouldn't take no for an answer. I kept going back to them every time there was a new company on board, or some new value proposition. Eventually, many of them actually said "yes" – the program turned out to be so great that we doubled our attendees from the year before. A lot of people might have given up after the first rejection, but it's just not in my nature. If I know something is possible, I have to keep trying until I get it.
I would weigh the offer and consider it, however, this company and this role is my first choice.
If you are, describe it through a story / experience that you had. If you aren't, then explain why you're not. If the job role asks for you to be aggressive/not aggressive and you're the opposite of it, explain how you would develop that characteristic.
73. How do you evaluate your ability to handle conflict?
I pride myself on being a good problem solver. Through my previous job and management positions I have faced numerous conflicts in different situations, and my experiences have helped me to hone my issue resolution skills. I believe that it is important to get to and address the root of the issue, in a respectable manner.
74. How good are you at problem solving?
Describe the problem first and then discuss how you were able to fix it.
If you want to show your ambition, you can discuss how you haven't reached all of your goals yet and in that sense aren't satisfied. However, if you want to discuss satisfaction from your job discuss an experience in which you achieved something.
Never ask Salary, perks, leave, place of posting, etc. regarded questions. Try to ask more about the company to show how early you can make a contribution to your organization like. “Sir, with your kind permission I would like to know more about induction and developmental programs?” OR Sir, I would like to have my feedback, so that I can analyze and improve my strengths and rectify my shortcomings.
It should say the same thing - after all - if you think this salary is fair then it should suit the responsibilities!
