1. How have you made an impact on your team in the past?

I would explain and show to him or her best way possible and if they have a better way then I will encourage him or her to let me know then we can see if it works or not Regarding Electrical Parts Reconditioner.

2. What have you learned from mistakes on the job?

Candidates without specific examples often do not seem credible. However, the example shared should be fairly inconsequential, unintentional, and a learned lesson should be gleaned from it. Moving ahead without group assistance while assigned to a group project meant to be collaborative is a good example.

3. If you could do it all over again, how would you plan your academic studies differently?

Whatever you do, just don't act bitter. A lot of times we wish we could change the past, but focus on the positive reasons and results of the decisions you already made.

4. Do you consider yourself successful?

You should always answer yes to this question. Briefly explain why without going on and on. If you communicate that you're more successful than you really are you may come off as arrogant or unrealistic. A goof explanation is that you have set professional goals and that you have met some of these goals and are on track to meet more in the near future.

5. You have a project due in one hour but a more important emergency that affects business needs to be fixed immediately, what do you do?

Focus on the issue that impacts the business most first.

6. What critical component of this position Regarding Electrical Parts Reconditioner makes the work challenging?

Heading information: This should include job title, pay grade or range, reporting relationship (by position, not individual), hours or shifts, and the likelihood of overtime or weekend work.
Summary objective of the job: List the general responsibilities and descriptions of key tasks and their purpose, relationships with customers, coworkers, and others, and the results expected of incumbent employees.
Qualifications: State the education, experience, training, and technical skills necessary for entry into this job.
Special demands: This should include any extraordinary conditions applicable to the job Regarding Electrical Parts Reconditioner (for example, heavy lifting, exposure to temperature extremes, prolonged standing, or travel).
Job duties and responsibilities: Only two features of job responsibility are important: identifying tasks that comprise about 90 to 95 percent of the work done and listing tasks in order of the time consumed (or, sometimes, in order of importance).

7. What have you learned from mistakes on this job?

Candidates without specific examples often do not seem credible. However, the example shared should be fairly inconsequential, unintentional, and a learned lesson should be gleaned from it. Moving ahead without group assistance while assigned to a group project meant to be collaborative is a good example.

8. How well do you know our company?

Well, a developed company that is gradually building their reputation in the competitive world.

9. If you have multiple projects on your plate, how do you handle completing them on time?

Prioritize based on business importance. Set clear timelines for each so that you know which ones to knock out first. Get your teammates to help if necessary.

10. Why do you think you'll do well at this job?

Provide several reasons including skills, experience and interest. If you can show how you've been successful in a similar career field or job position that will go along way to helping the interviewer believe you'll also be successful at this new job.

11. If you were hiring a person for this job Regarding Electrical Parts Reconditioner, what would you look for?

Discuss qualities you possess required to successfully complete the job duties.

12. Can you explain why you changed career paths Regarding Electrical Parts Reconditioner?

Don't be thrown off by this question-just take a deep breath and explain to the hiring manager why you've made the career decisions Regarding Electrical Parts Reconditioner you have. More importantly, give a few examples of how your past experience is transferable to the new role. This doesn't have to be a direct connection; in fact, it's often more impressive when a candidate can make seemingly irrelevant experience seem very relevant to the role.

13. What are the goals you've set for yourself?

You could discuss your goals with regards to these categories: Career goals, impact you want to leave on society, financial goals, academic goals, charitable goals.

14. Tell me a difficult situation you have overcome in the workplace?

Conflict resolution, problem solving, communication and coping under pressure are transferable skills desired by many employers Regarding Electrical Parts Reconditioner.
Answering this question right can help you demonstrate all of these traits.
☛ Use real-life examples from your previous roles that you are comfortable explaining
☛ Choose an example that demonstrates the role you played in resolving the situation clearly
☛ Remain professional at all times – you need to demonstrate that you can keep a cool head and know how to communicate with people

15. What did you dislike about your old job?

Try to avoid any pin point , like never say “I did not like my manager or I did not like environment or I did not like team” Never use negative terminology. Try to keep focus on every thing was good Regarding Electrical Parts Reconditioner , I just wanted to make change for proper growth.

16. Why do you want to leave your current company Regarding Electrical Parts Reconditioner?

Bad Answer: Complaining about or blaming their former job, boss or colleagues. Also, having no good reason.

Good answer: One that focuses on the positives about why the job they're applying for offers them better learning or career opportunities, chances for advancement, aligns more closely to their long term goals, or is a better fit for them.

17. What is the difference between a big ego and a healthy ego?

"Ego" should be replaced by confidence. It's good to be confident as it shows that you know what you're doing. However, a big ego is when confidence spirals out of control and you become arrogant.

18. If you felt like you were hitting the proverbial "wall" and getting burned out, what would you do to re-energize yourself?

Take a break to rest. Work in smaller increments of time to increase focus with breaks in between. Delegate tasks to those that are willing to help.

19. What's the last book you read?

Try to talk about a book related to the industry, for example, if you're applying for a role related to business, cite a business book.

20. Are you willing to work overtime or odd hours?

Be completely honest. You don't want to lie to get the job if you're not going to work the hours required.

21. What motivates you the most?

Is it money? Is it career development? Is it recognition? Is it a sense of achievement? Is it to impress your peers? Is it for fame?

22. What is more important to you money or success?

First ask yourself that question before the interview - what are your priorities? Are money and success actual one in the same goal for you? If not, what's more important based on how do you define success?

23. What are your weaknesses for Electrical Parts Reconditioner position?

Try not to be too critical when answering this question. Instead, pick one of your weaknesses and try to turn it into a positive.
For example, you could be a perfectionist, which means that you sometimes take longer on tasks, but you make sure that they are completed to a high quality. It is important to make a negative into a positive as it doesn't make you appear overly critical and shows you can reflect on your own performance.

24. Your client is upset with you for a mistake you made, how do you react?

Acknowledge their pain - empathize with them. Then apologize and offer a solution to fix the mistake.

25. How would you be an asset to us Regarding Electrical Parts Reconditioner?

Think again about the job specification and the skills needed for this role Regarding Electrical Parts Reconditioner. Have a paragraph prepared highlighting how you will be able to do the job and what you can bring to the team. It goes without saying that this paragraph should be positive.

26. Why are you leaving the present company?

According to me we can not grow in the field without taking more responsibilities and risks and also we can't enhance our team leading capabilities, managerial skills without expose to wide range of people.

27. Why were you fired?

OK, if you get the admittedly much tougher follow-up question as to why you were let go (and the truth isn't exactly pretty), your best bet is to be honest (the job-seeking world is small, after all). But it doesn't have to be a deal-breaker. Share how you've grown and how you approach your job and life now as a result. If you can position the learning experience as an advantage for this next job, even better.

28. How many basketballs would fit in this room?

One. You did not ask what is the maximum number of basketballs you can fit in the room.

29. What are some of the things that you and your supervisor disagree upon and how do you resolve them? What do you do when you are pressed for a decision?

The key is that you openly communicate your thoughts to your supervisor to explain your position and try to come to a mutual decision together. Also be sure to listen to his/her thoughts so that you can potentially compromise. When you're pressed for a decision, make sure you've put thought into the reasons as to how you arrived at it and then decisively make it.

30. How important is a positive attitude to you?

Incredibly important. I believe a positive attitude is the foundation of being successful - it's contagious in the workplace, with our customers, and ultimately it's the difference maker.

31. Why should we give you this job Regarding Electrical Parts Reconditioner when someone else is equally qualified?

Describe how you're unique, but make sure you tie it to the job responsibilities and how you would impact the company. For example, "I believe my unique programming skills and experience in developing over 18 best selling iphone apps will help the company develop high quality applications faster than my competitors"

32. What makes a product successful?

Basing on the monetization, these questions give you the chance to prove your personal try. Do not show extremely your optimism and pursue the unreality. Give your answers the reality.
It is useful to predict a five to ten- year- scenario of expectations in order to gain your targets that you set up and it is the period of time to see how your plans and targets are performed.
Therefore, the quality of the product and marketability of the mentioned industry need to be highlighted. This will help you to achieve the interviewer's attention and insurance to you personality and you can get the honest and long- term goals.

33. Have you ever mentored anyone before? If yes, describe the situation?

Describe a time where you've helped someone else. Mentor ships can be informal so as you've helped someone over a period of time that can certainly count. The key is to highlight how you utilized certain skills/attributes like coaching, teaching, patience, communication skills, and so forth to mentor that person.

34. What was the most difficult employee situation you found yourself Regarding Electrical Parts Reconditioner? How did you overcome the problem?

One of employees was conflicting with other and colleague who was prove his was wrong hi denied and was invite union to defend him but we have prove his wrong and I was facing disciplinary action.

35. Why are you interested in this type of job Regarding Electrical Parts Reconditioner?

You're looking for someone who enjoys working with the elderly, or a caring, sociable, and nurturing person.

36. What makes you a good manager?

Describe how you manage people, time, money and energy in the most effective manner to achieve the best return of that investment.

37. What do you know about our competition?

Make sure you do your research on their competitors. You can find this by going to yahoo finance and click on their competitors (if they are public). From there research the news on them and go to their websites to understand their positioning on solutions and vision. You can also research local regional companies that are their competition (if it's a smaller private company on a regional scale) by simply typing in similar product offerings in the Google search followed by the city. Make sure you know their competitor's vision, products, culture, and how they are differentiated against their competition (and if they're not, how they could be)

38. What do you consider to be your weaknesses?

What your interviewer is really trying to do with this question-beyond identifying any major red flags-is to gauge your self-awareness and honesty. So, “I can't meet a deadline to save my life Regarding Electrical Parts Reconditioner” is not an option-but neither is “Nothing! I'm perfect!” Strike a balance by thinking of something that you struggle with but that you're working to improve. For example, maybe you've never been strong at public speaking, but you've recently volunteered to run meetings to help you be more comfortable when addressing a crowd.

39. What did you major in and why?

Tell them your major and the motivations behind why you chose it and how it's helped to prep your of this potential job.

40. Why are manhole covers round?

This is a classic brainteaser, which was reportedly first asked by a Microsoft interviewer. Here's how to ""solve"" this brainteaser (remember to speak and reason out loud while solving this brainteaser): Why are manhole covers round? Could there be a structural reason? Why aren't manhole covers square? It would make it harder to fit with a cover. You'd have to rotate it exactly the right way.
The pipes below are also round, so fitting them might be easier, as might be making them. So many manhole covers are round because they don't need to be rotated. There are no corners to deal with. Also, a round manhole cover won't fall into a hole because it was rotated the wrong way, so it's safer. Looking at this, it seems corners are a problem. You can't cut yourself on a round manhole cover. And because it's round, it can be more easily transported. One person can roll it.

41. Suppose there are three light switches outside a room. Inside is a single light bulb, controlled by one of the three switches. You need to determine which switch operates the bulb. You can turn the switches on and off as many times as you wish (they are all off to begin with), but may only enter the room once. There is no one there to help you. The door to the room is closed, and there are no windows, so you cannot see inside. How can you discover which switch operates the bulb?

Do the following steps:
☛ 1. Turn ON two switches, and leave one OFF.
☛ 2. Wait a few minutes.
☛ 3. Turn one switch from ON to OFF. One is now ON and two are OFF
☛ 4. Enter the room. - If the light is ON, it is controlled by the switch you left ON. - If the light bulb is OFF, touch it. If it is warm it is controlled by the switch you turned ON and OFF. If it is cold, it is controlled by the switch you never turned on.

42. What do you aspire to be?

Discuss your aspirations for the near, immediate and long term. You want to show them you are thinking of making an impact now as well as the future.

43. What are your personal skills which make you a candidate for the position Regarding Electrical Parts Reconditioner?

The list of crucial character traits includes patience, tact, and poise, with personal and cultural sensitivity. One needs the ability to work long hours, with much walking and some physical tasks. But the most important trait of all is to love people and to have the desire to care for them.

44. How do you continue learning on a daily basis? Why is continuous improvement necessary Regarding Electrical Parts Reconditioner?

You can learn on the job, through books and magazines, through social networks, blogs, seminars, mentors and so on. Continuous improvement is important because the one thing in life that is constant is change. And you have to continue to push yourself day in and day out to be the best.

45. Why do you want to join our company?

This is a question that is aimed at finding out whether you know enough about the company and the basic market. The best way to answer this question is to do some research on the company and highlight its positive points.

46. What is the most important quality a supervisor should have?

The ability to inspire / lead a team towards one common vision.

47. How has school prepared you for this job role?

Think back to how you've interacted with your peers to develop social skills, how you've worked with classmates on projects to develop teamwork and collaborative skills, how you've developed discipline through studying, how the courses have helped your creativity, and how the classes you've taken have impacted your analytical / problem solving / reasoning skills.

48. What type of personalities do you work best with and why?

Think of which personalities you work best with (do you like outgoing, collaborative, personable working relationships and so forth?)

49. How would your friends describe you?

My friends would probably say that I'm extremely persistent – I've never been afraid to keep going back until I get what I want. When I worked as a program developer, recruiting keynote speakers for a major tech conference, I got one rejection after another – this was just the nature of the job. But I really wanted the big players – so I wouldn't take no for an answer. I kept going back to them every time there was a new company on board, or some new value proposition. Eventually, many of them actually said "yes" – the program turned out to be so great that we doubled our attendees from the year before. A lot of people might have given up after the first rejection, but it's just not in my nature. If I know something is possible, I have to keep trying until I get it.

50. Why are you leaving your current job?

This is a toughie, but one you can be sure you'll be asked. Definitely keep things positive-you have nothing to gain by being negative about your past employers. Instead, frame things in a way that shows that you're eager to take on new opportunities and that the role you're interviewing for is a better fit for you than your current or last position. For example, “I'd really love to be part of product development from beginning to end, and I know I'd have that opportunity here.” And if you were let go? Keep it simple: “Unfortunately, I was let go,” is a totally OK answer.

51. What is your greatest weakness Regarding Electrical Parts Reconditioner? What are you doing to improve it?

I believe my biggest weakness Regarding Electrical Parts Reconditioner is wanting to help anyone I can help. What I mean is I am willing to take on task that are not my job. I want to learn all I can. However, that has helped me get promoted or even asked to help in times of need in other department. I have been know as the "go to person" when help is needed.

52. Do you think a leader should be feared or liked?

Liked. You want to work harder for people that inspire and motivate you. Fear only lasts for so long.

53. How much time do you need to join the organization Regarding Electrical Parts Reconditioner?

You should be able to join it right away, barring plans you've already made (family travel, vacation, other obligations). The key is to simply be open in communication of what's already committed on your schedule. Most companies are accommodating. If they are not, weight the importance of joining that company vs. your plans.

54. What would you do if our competitor offered you a position Regarding Electrical Parts Reconditioner?

I would weigh the offer and consider it, however, this company and this role is my first choice.

55. Explain me about your experience working in this field Regarding Electrical Parts Reconditioner?

I am dedicated, hardworking and great team player for the common goal of the company I work with. I am fast learner and quickly adopt to fast pace and dynamic area. I am well organized, detail oriented and punctual person.

56. How have you changed in the last five years?

All in a nutshell. But I think I've attained a level of personal comfort in many ways and although I will change even more in the next 5-6 years I'm content with the past 6 and what has come of them.

57. Give me an example of when you competed hard and won?

You can reference many different areas here when discussing a story of where you won in competition: Work experience (ideal), sports, clubs, classes, projects.

58. How would you go about establishing your credibility quickly Regarding Electrical Parts Reconditioner with the team?

Fully understand my responsibilities, work hard and exceed expectations, learn as much as possible, help others as much as possible, understand what my teammates' goals and needs are, be on time, and gain a mentor.

59. What's the least rewarding work you've ever done and why?

Describe work you've done that you feel doesn't take advantage of your full potential. For example, "I once had to make paper copies for my job and I feel it didn't take full advantage of my skills. However, it did teach me to be humble in my work and to appreciate a good opportunity when it arose to use my skills"

60. Tell me about the last time you had to work with someone inside or outside of your department to accomplish a goal?

Show that you were communicative with that person and that you were able to collaborate effectively in sharing ideas and work tasks. They want to see that you can be a team player.

61. What's the most rewarding work you've ever done and why?

Companies love it when you discuss how you've made an impact on your teammates, clients, or partners in the business or in school. It should be rewarding because of the hard work and creative process that you've put into it.

62. How do you decide what to delegate and to whom?

Identify the strengths of your team members and their availability based on the priorities they have on their plate. From there, invest the tasks upon each member based on where you think you'll get the best return.

63. Explain me about a time when you reached a goal within a tight deadline?

I work well under pressure to meet deadlines without jeopardizing the quality of my work. I have always worked in a fast pace environment where we are constantly under pressure to achieve best results within a time frame.

64. Tell me one thing about yourself you wouldn't want me to know?

Talk about a trait that you would consider a weakness. No need to talk about your deepest darkest secrets here.

65. How much do you expect to get paid Regarding Electrical Parts Reconditioner?

For this be prepared and research salary to find out what similar positions are paying in your area before you go to the interview. Try to find this information out before giving your salary expectations. You can and should provide a range instead of an exact number. But again, don't say any numbers you're not comfortable with because if the employer offers you a salary at the lowest end of your range, you don't have much to negotiate with when it comes to getting a higher salary.

66. How do you evaluate your ability to handle conflict?

I pride myself on being a good problem solver. Through my previous job and management positions I have faced numerous conflicts in different situations, and my experiences have helped me to hone my issue resolution skills. I believe that it is important to get to and address the root of the issue, in a respectable manner.

67. How many square feet of pizza are eaten in the United States each month?

This is a classic guesstimate question where you need to think aloud. And so first off you round the U.S. population to 300 million people (it's actually about 315 million but rounding will be much easier and your interviewer will not score you lower for rounding). Then estimate how many people eat pizza. A decent educated guess is two out of every three people, or 200 million. Now let's say the average pizza-eating person eats pizza twice a month, and eats two slices at a time. That's four slices a month. If the average slice of pizza is perhaps six inches at the base and 10 inches long, then the slice is 30 square inches of pizza. So, four pizza slices would be 120 square inches (30 times 4).
Since one square foot equals 144 square inches (12 times 12), let's assume that each person who eats pizza eats one square foot per month. Since there are 200 million pizza-eating Americans, 200 million square feet of pizza are consumed in the U.S. each month. To summarize: 300 million people in America, 200 million eat pizza, average slice of pizza is six inches at the base and 10 inches long or 30 square inches, average American eats four slices of pizza a month, four pieces times 30 square inches equals 120 square inches (one square foot is 144 square inches), so let's assume one square foot per person, and thus one square foot times 200 million people equals 200 million square feet of pizza a month.

68. How good are you at problem solving?

Describe the problem first and then discuss how you were able to fix it.

69. Do you have any questions for me?

Good interview questions to ask interviewers at the end of the job interview include questions on the company growth or expansion, questions on personal development and training and questions on company values, staff retention and company achievements.

70. Explain an occasion when you had to adapt in the face of a difficult situation?

One of the most useful interview tactics is to remain positive about your work and achievements. This question lets the candidate draw on their own personal history to show how they have been positive and successful in the face of difficulties. Choose a specific occasion to describe, rather than dealing with generic platitudes.

71. What do you think is your greatest weakness?

Don't say anything that could eliminate you from consideration for the job. For instance, "I'm slow in adapting to change" is not a wise answer, since change is par for the course in most work environments. Avoid calling attention to any weakness that's one of the critical qualities the hiring manager is looking for. And don't try the old "I'm a workaholic," or "I'm a perfectionist.

72. How would you motivate your team members to produce the best possible results?

Trying to create competitive atmosphere, trying to motivate the team as a whole, organizing team building activities, building good relationships amongst people.