By asking this question, your interviewer hopes to learn whether you can communicate effectively, address issues in the workplace and motivate others during difficult times. Giving negative feedback requires honesty, thoughtfulness and tact. Answering this question well can help show an interviewer that you would be a good fit for a managerial position or a position that involves working closely with others.
2. Do you have any blind spots?
This question is often meant to trick candidates since acknowledgment of blind spots would indicate they were aware of them. Also, do not disclose bad habits or other personal concerns. Let the interviewer find out about your personal flaws through the course of the interview without directly stating these flaws.
3. What has been your biggest professional disappointment?
When discussing a professional disappointment, make sure to discuss a scenario you could not control. Be positive about the experience and accept personal responsibility where applicable.
4. What is your philosophy towards work?
This is typically a straightforward question that merits a straightforward answer. Do you have strong worth ethic? Will you do whatever it takes to make sure the job gets done? Just say so in your response. Keep it short, direct and positive.
5. Tell me about a time when you successfully handled a situation?
For this question, the interviewer wants to know what you do in a situation that doesn't have a clear answer. This will help the interviewer know how you respond to unforeseen challenges.
6. Tell me about a time when you helped resolve a dispute between others?
Be sure to discuss a very specific example. Tell the interviewer what methods you used to solve the problem without focusing on the details of the problem.
7. Are you currently looking at other job opportunities?
Just answer this question honestly. Sometime an employer wants to know if there are other companies you're considering so that they can determine how serious you are about the industry, they're company and find out if you're in demand. Don't spend a lot of time on this question; just try to stay focused on the job you're interviewing for.
This would be the first question asked in any interview. Therefore, it is important that you give a proper reply to the question regarding your education. You should have all the documents and certificates pertaining to your education and/or training, although time may not allow the interviewer to review all of them.
9. How do you propose to compensate for your lack of experience?
The first thing you should do is discuss experience you have the interviewer is unfamiliar with. Once that is detailed, tell the person conducting the interview that you are able to learn new tasks and information in a reasonable period of time and possess a strong work ethic. However, only state this if you can live up to these expectations.
10. What have you learned from mistakes on the job?
Candidates without specific examples often do not seem credible. However, the example shared should be fairly inconsequential, unintentional, and a learned lesson should be gleaned from it. Moving ahead without group assistance while assigned to a group project meant to be collaborative is a good example.
11. What qualities do you look for in a boss?
Remain optimistic and do not be too specific. Good attributes include moral character, honesty, and intelligence since managers usually believe they possess these qualities.
12. Do you consider yourself successful?
You should always answer yes to this question. Briefly explain why without going on and on. If you communicate that you're more successful than you really are you may come off as arrogant or unrealistic. A goof explanation is that you have set professional goals and that you have met some of these goals and are on track to meet more in the near future.
13. What makes you right for this position?
This question can be tricky because you need to show your worth As Machine Operator Plating Metal without sounding cocky or arrogant. Research the business ahead of time and become familiar with its mission and values. Take the time to figure out how your personal qualities fit the needs of the business and use that fit to provide your answer.
14. Top 13 Situational Interview Questions As Machine Operator Plating Metal:
Situational interviews As Machine Operator Plating Metal are similar to behavioral interview questions - but they are focused on the future, and ask hypothetical questions, whereas behavioral interview questions look at the past.
The advantage is that employers can put all candidates in the same hypothetical situations, and compare their answers.
1. What would you do if you made a strong recommendation in a meeting, but your colleagues decided against it?
2. How you would handle it if your team resisted a new idea or policy you introduced?
3. How would you handle it if the priorities for a project you were working on were suddenly changed?
4. What would you do if the work of an employee you managed didn't meet expectations?
5. What would you do if an important task was not up to standard, but the deadline to complete it had passed?
6. What steps would you take to make an important decision on the job As Machine Operator Plating Metal?
7. How would you handle a colleague you were unable to form a positive relationship with?
8. What would you do if you disagreed with the way a manager wanted you to handle a problem?
9. What would you do if you were assigned to work with a difficult client As Machine Operator Plating Metal?
10. What would you do if you worked hard on a solution to a problem, and your solution was criticized by your team?
11. How would you handle working closely with a colleague who was very different from you?
12. You're working on a key project that you can't complete, because you're waiting on work from a colleague. What do you do?
13. You realize that an early mistake in a project is going to put you behind deadline. What do you do?
15. Where do you see your career in five years As Machine Operator Plating Metal?
I would like to retire from this company. I would like to make a difference in the company whether in the company or any other position or area of the company As Machine Operator Plating Metal.
16. What are your weaknesses for Machine Operator Plating Metal position?
Try not to be too critical when answering this question. Instead, pick one of your weaknesses and try to turn it into a positive.
For example, you could be a perfectionist, which means that you sometimes take longer on tasks, but you make sure that they are completed to a high quality. It is important to make a negative into a positive as it doesn't make you appear overly critical and shows you can reflect on your own performance.
17. What did you like least about your last (or current) job As Machine Operator Plating Metal?
Don't vent or focus on the negative with brutally honest answers such as "My boss was a jerk," or "The company culture was too politically correct," or "They just weren't giving me the opportunity to take my career to the next level." Instead, keep the emphasis on the positive, even though there are sure to be things you weren't happy about.
18. How do you think you might fit this position As Machine Operator Plating Metal?
An important part of research before the interview is what the company does and how the job role relates to that. This includes the company philosophy and working methods. Questions such as this seek to find out how a candidate will fit into the organisation As Machine Operator Plating Metal. Answer positively; including practical examples of how you anticipate you would perform in the new role.
19. What have you done to improve your knowledge As Machine Operator Plating Metal in the last year?
Try to include improvement activities that relate to the job As Machine Operator Plating Metal. A wide variety of activities can be mentioned as positive self-improvement. Have some good ones handy to mention.
20. Top 11 Questions to Verify Experience and Credentials As Machine Operator Plating Metal:
Sometimes people want a job a little too bad - and they may fudge their credentials and experience a bit.
If you've run into this problem, are worried about it, or have credentials and experience that are absolutely essential, you may need to ask a few verification questions.
If you are a candidate, you should review your resume and make sure you know all the key points, and that nothing has been misconstrued.
1. What grades did you get in college?
2. What were your responsibilities when you worked in job x?
3. How many people were on your team at your last job?
4. What will your previous manager/supervisor say when I ask where you needed to improve?
5. What was your beginning and ending salary at job x?
6. What were your beginning and ending titles at job x?
7. Are you eligible for rehire at job x?
8. What tools are necessary for performing job x?
9. Describe to me how you would perform [x typical job task].
10. What was the focus of your thesis?
11. When did you leave company x?
21. What is your greatest failure As Machine Operator Plating Metal, and what did you learn from it?
When I was in college, I took an art class to supplement my curriculum. I didn't take it very seriously, and assumed that, compared to my Engineering classes, it would be a walk in the park. My failing grades at midterm showed me otherwise. I'd even jeopardized my scholarship status. I knew I had to get my act together. I spent the rest of the semester making up for it, ended up getting a decent grade in the class. I learned that no matter what I'm doing, I should strive to do it to the best of my ability. Otherwise, it's not worth doing at all.
22. Why should we select you not others?
Here you need to give strong reasons to your interviewer to select you not others. Sell yourself to your interviewer in interview in every possible best way. You may say like I think I am really qualified for the position. I am a hard worker and a fast learner, and though I may not have all of the qualifications that you need, I know I can learn the job and do it well.”
23. Why should I hire you As Machine Operator Plating Metal?
To close the deal on a job offer, you MUST be prepared with a concise summary of the top reasons to choose you. Even if your interviewer doesn't ask one of these question in so many words, you should have an answer prepared and be looking for ways to communicate your top reasons throughout the interview process.
24. How would you be an asset to us As Machine Operator Plating Metal?
Think again about the job specification and the skills needed for this role As Machine Operator Plating Metal. Have a paragraph prepared highlighting how you will be able to do the job and what you can bring to the team. It goes without saying that this paragraph should be positive.
25. Explain a time when you did not get along with your coworker?
I used to lock heads with a fellows. We disagreed over a lot of things – from the care of civilians to who got what shifts to how to speak with a victim's family. Our personalities just didn't mesh. After three months of arguing, I pulled her aside and asked her to lunch. At lunch, we talked about our differences and why we weren't getting along. It turns out, it was all about communication. We communicated differently and once we knew that, we began to work well together. I really believe that talking a problem through with someone can help solve any issue.
26. Do you like being around people?
People skills are a necessity for medical assistants. When answering this question, be sure to show that you enjoy interacting and working with others and that you also derive great enjoyment from helping others. This will show that you are a team player and that you would be a valuable team member As Machine Operator Plating Metal.
27. Why are manhole covers round?
This is a classic brainteaser, which was reportedly first asked by a Microsoft interviewer. Here's how to ""solve"" this brainteaser (remember to speak and reason out loud while solving this brainteaser): Why are manhole covers round? Could there be a structural reason? Why aren't manhole covers square? It would make it harder to fit with a cover. You'd have to rotate it exactly the right way.
The pipes below are also round, so fitting them might be easier, as might be making them. So many manhole covers are round because they don't need to be rotated. There are no corners to deal with. Also, a round manhole cover won't fall into a hole because it was rotated the wrong way, so it's safer. Looking at this, it seems corners are a problem. You can't cut yourself on a round manhole cover. And because it's round, it can be more easily transported. One person can roll it.
OK, if you get the admittedly much tougher follow-up question as to why you were let go (and the truth isn't exactly pretty), your best bet is to be honest (the job-seeking world is small, after all). But it doesn't have to be a deal-breaker. Share how you've grown and how you approach your job and life now as a result. If you can position the learning experience as an advantage for this next job, even better.
Do the following steps:
☛ 1. Turn ON two switches, and leave one OFF.
☛ 2. Wait a few minutes.
☛ 3. Turn one switch from ON to OFF. One is now ON and two are OFF
☛ 4. Enter the room. - If the light is ON, it is controlled by the switch you left ON. - If the light bulb is OFF, touch it. If it is warm it is controlled by the switch you turned ON and OFF. If it is cold, it is controlled by the switch you never turned on.
30. What can you tell me about team work as part of the job As Machine Operator Plating Metal?
There is usually a team of staff nurses working in cooperation with each other. A team of nurses has to get along well and coordinate their actions, usually by dividing their responsibilities into sectors or specific activities. They help each other perform tasks requiring more than one person.
31. What do you already know about our company?
Good reputation of a large home grown company that has various departments and product.
32. What makes a product successful?
Basing on the monetization, these questions give you the chance to prove your personal try. Do not show extremely your optimism and pursue the unreality. Give your answers the reality.
It is useful to predict a five to ten- year- scenario of expectations in order to gain your targets that you set up and it is the period of time to see how your plans and targets are performed.
Therefore, the quality of the product and marketability of the mentioned industry need to be highlighted. This will help you to achieve the interviewer's attention and insurance to you personality and you can get the honest and long- term goals.
33. How do you deal with pressure or stressful situations?
Choose an answer that shows that you can meet a stressful situation head-on in a productive, positive manner and let nothing stop you from accomplishing your goals. A great approach is to talk through your go-to stress-reduction tactics (making the world's greatest to-do list, stopping to take 10 deep breaths), and then share an example of a stressful situation you navigated with ease.
Usually, if the answer to a brainteaser seems too easy, chances are the answer's wrong. And in this case, the answer is not zero degrees. The hour hand, remember, moves as well. That is, in addition to the minute hand. And so, at 3:15, the hour hand and the minute hand are not on top of each other. In fact, the hour hand has moved a quarter of the way between the 3 and 4. This means it's moved a quarter of 30 degrees (360 degrees divided by 12 equals 30). So the answer, to be exact, is seven and a half degrees (30 divided by four).
35. Do you work well on a team? How would you define teamwork?
I would define team work as getting the job done As Machine Operator Plating Metal whether that means if I have to do more then the guy next to me as long as the work gets finished.
36. Where do you see yourself in five years As Machine Operator Plating Metal?
If asked this question, be honest and specific about your future goals, but consider this:
A hiring manager wants to know
☛ a) if you've set realistic expectations for your career,
☛ b) if you have ambition (a.k.a., this interview isn't the first time you're considering the question), and
☛ c) if the position aligns with your goals and growth. Your best bet is to think realistically about where this position could take you and answer along those lines. And if the position isn't necessarily a one-way ticket to your aspirations?
It's OK to say that you're not quite sure what the future holds, but that you see this experience playing an important role in helping you make that decision.
37. How many tennis balls can you fit into a limousine? 1,000? 10,000? 100,000? Seriously?
Well, seriously, you might get asked brainteaser questions like these, especially in quantitative jobs. But remember that the interviewer doesn't necessarily want an exact number-he wants to make sure that you understand what's being asked of you, and that you can set into motion a systematic and logical way to respond. So, just take a deep breath, and start thinking through the math. (Yes, it's OK to ask for a pen and paper!)
38. What other companies are you interviewing with?
Companies ask this for a number of reasons, from wanting to see what the competition is for you to sniffing out whether you're serious about the industry. “Often the best approach is to mention that you are exploring a number of other similar options in the company's industry,”. It can be helpful to mention that a common characteristic of all the jobs you are applying to is the opportunity to apply some critical abilities and skills that you possess. For example, you might say 'I am applying for several positions with IT consulting firms where I can analyze client needs and translate them to development teams in order to find solutions to technology problems.'
39. If hired, how do you intend on making a difference with our company?
Dedicate myself to learn everything about the new company that I can, look for ways and ideas that could improve, processes, safety, removing obstacles from the associates, I want to advance within the company.
40. What have you done to reduce costs, increase revenue, or save time?
Even if your only experience is an internship, you have likely created or streamlined a process that has contributed to the earning potential or efficiency of the practice. Choose at least one suitable example and explain how you got the idea, how you implemented the plan, and the benefits to the practice.
41. How many square feet of pizza are eaten in the United States each month?
This is a classic guesstimate question where you need to think aloud. And so first off you round the U.S. population to 300 million people (it's actually about 315 million but rounding will be much easier and your interviewer will not score you lower for rounding). Then estimate how many people eat pizza. A decent educated guess is two out of every three people, or 200 million. Now let's say the average pizza-eating person eats pizza twice a month, and eats two slices at a time. That's four slices a month. If the average slice of pizza is perhaps six inches at the base and 10 inches long, then the slice is 30 square inches of pizza. So, four pizza slices would be 120 square inches (30 times 4).
Since one square foot equals 144 square inches (12 times 12), let's assume that each person who eats pizza eats one square foot per month. Since there are 200 million pizza-eating Americans, 200 million square feet of pizza are consumed in the U.S. each month. To summarize: 300 million people in America, 200 million eat pizza, average slice of pizza is six inches at the base and 10 inches long or 30 square inches, average American eats four slices of pizza a month, four pieces times 30 square inches equals 120 square inches (one square foot is 144 square inches), so let's assume one square foot per person, and thus one square foot times 200 million people equals 200 million square feet of pizza a month.
42. How would you observe the level of motivation of your subordinates?
Choosing the right metrics and comparing productivity of everyone on daily basis is a good answer, doesn't matter in which company you apply for a supervisory role.
43. How do you keep each member of the team involved and motivated?
Many managers mistakenly think that money is the prime motivator for their employees. However, according to surveys by several different companies, money is consistently ranked five or lower by most employees. So if money is not the best way to motivate your team, what is?
Employees' three most important issues according to employees are:
☛ Respect
☛ A sense of accomplishment
☛ Recognition
44. Do you like to start personal relationships with other employees?
Well, the right answer is yes and no. Good personal relations can improve the overall performance of a team. But on the other hand, you should not let your emotions to affect your decisions in work.
45. Why are you leaving your current job?
This is a toughie, but one you can be sure you'll be asked. Definitely keep things positive-you have nothing to gain by being negative about your past employers. Instead, frame things in a way that shows that you're eager to take on new opportunities and that the role you're interviewing for is a better fit for you than your current or last position. For example, “I'd really love to be part of product development from beginning to end, and I know I'd have that opportunity here.” And if you were let go? Keep it simple: “Unfortunately, I was let go,” is a totally OK answer.
46. How have you changed in the last five years?
All in a nutshell. But I think I've attained a level of personal comfort in many ways and although I will change even more in the next 5-6 years I'm content with the past 6 and what has come of them.
47. What types of personalities do you work with best?
In the past, I have found it difficult to work with others who see themselves as better than others, who can take criticism, and who refuse to work with others. I have found it challenging to work with them b/c I am a team oriented person who feels the importance of working together over the needs of the individual especially in a learning environment.
48. What features of your previous jobs have you disliked?
It's easy to talk about what you liked about your job in an interview, but you need to be careful when responding to questions about the downsides of your last position. When you're asked at a job interview about what you didn't like about your previous job, try not to be too negative. You don't want the interviewer to think that you'll speak negatively about this job or the company should you eventually decide to move on after they have hired you.
49. What do you think is your greatest weakness?
Don't say anything that could eliminate you from consideration for the job. For instance, "I'm slow in adapting to change" is not a wise answer, since change is par for the course in most work environments. Avoid calling attention to any weakness that's one of the critical qualities the hiring manager is looking for. And don't try the old "I'm a workaholic," or "I'm a perfectionist.
50. Describe a typical work week for this position As Machine Operator Plating Metal?
Interviewers expect a candidate for employment to discuss what they do while they are working in detail. Before you answer, consider the position As Machine Operator Plating Metal you are applying for and how your current or past positions relate to it. The more you can connect your past experience with the job opening, the more successful you will be at answering the questions.
51. What are three positive things your last boss would say about you?
It's time to pull out your old performance appraisals and boss's quotes. This is a great way to brag about yourself through someone else's words:
“My boss has told me that I am the best designer he has ever had. He knows he can rely on me, and he likes my sense of humor.”
52. Why do you want to work As Machine Operator Plating Metal for this organisation?
Being unfamiliar with the organisation will spoil your chances with 75% of interviewers, according to one survey, so take this chance to show you have done your preparation and know the company inside and out. You will now have the chance to demonstrate that you've done your research, so reply mentioning all the positive things you have found out about the organisation and its sector etc. This means you'll have an enjoyable work environment and stability of employment etc – everything that brings out the best in you.
53. Do you work well under pressure?
Yes.. When it comes down to the wire, the best thing I can to remain focused, have some flexibility, and understand priorities.. Giving them attention in the order they are needed.
54. What is your biggest achievement?
Quality work to be is about doing work to the require or set standard, which is very important when it comes to warehouse operations.
55. What's your salary history?
When you are interviewing for a new job, it is common practice for the company to ask you about your salary history. I typically want to know what the candidate's base salary is, if they receive any bonus, the average bonus amount, and any additional compensation or perks, such as 500k matching, stock grants or stock options, paid time off and how much they are required to pay towards their medical premiums.
These are important for support workers. But they differ from the communication skills of a CEO or a desktop support technician. Communication must be adapted to the special ways and needs of the clients. Workers must be able to not only understand and help their clients, but must project empathy and be a warm, humane presence in their lives.
57. Tell me something about your family background?
First, always feel proud while discussing about your family background. Just simple share the details with the things that how they influenced you to work in an airline field.
58. What was the most important task you ever had?
There are two common answers to this question that do little to impress recruiters:
☛ ‘I got a 2.1'
☛ ‘I passed my driving test'
No matter how proud you are of these achievements, they don't say anything exciting about you. When you're going for a graduate job, having a degree is hardly going to make you stand out from the crowd and neither is having a driving licence, which is a requirement of many jobs.
I believe my biggest weakness As Machine Operator Plating Metal is wanting to help anyone I can help. What I mean is I am willing to take on task that are not my job. I want to learn all I can. However, that has helped me get promoted or even asked to help in times of need in other department. I have been know as the "go to person" when help is needed.
60. What are your salary expectations As Machine Operator Plating Metal?
This question is like a loaded gun, tricky and dangerous if you're not sure what you are doing. It's not uncommon for people to end up talking salary before really selling their skills, but knowledge is power as this is a negotiation after all. Again, this is an area where doing your research will be helpful as you will have an understanding of average salary.
One approach is asking the interviewer about the salary range, but to avoid the question entirely, you can respond that money isn't a key factor and you're goal is to advance in your career. However, if you have a minimum figure in mind and you believe you're able to get it, you may find it worth trying.
61. What schedule do you hope to work? Are you willing to work extra hours?
Be honest. If you really want the job and are willing to work any schedule needed, say so. If, however, you have no intention of working late hours or weekends, simply let the interviewer know the hours that you are available to work. The same applies to extra hours. You are more likely to be hired if you are willing to work any time you are needed. However, saying that you are willing and then complaining about the hours once you start working is a recipe for disaster.
