1. What motivates you at the work place?

Keep your answer simple, direct and positive. Some good answers may be the ability to achieve, recognition or challenging assignments.

2. Describe your management style?

Try to avoid specific classifications, whatever it may be. Organizations usually prefer managers who can adapt their skills to different situations.

3. Tell us about a typical day at work. How does it start? What do you do?

At the beginning of each day, I inspect the work site to make sure that it is hazard-free. Once the work site is secured, I verify that all tools and equipment are adequate in supply. As soon as the work orders are delivered, I provide workers with security guidelines and carry out drills. During the workday, it is my duty to monitor workers to ensure that they are working according to the enforced safety policies and that any problems or accidents are quickly addressed.

4. Top 11 Questions to Verify Experience and Credentials As Rolling Mill Operator:

Sometimes people want a job a little too bad - and they may fudge their credentials and experience a bit.

If you've run into this problem, are worried about it, or have credentials and experience that are absolutely essential, you may need to ask a few verification questions.

If you are a candidate, you should review your resume and make sure you know all the key points, and that nothing has been misconstrued.


1. What grades did you get in college?

2. What were your responsibilities when you worked in job x?

3. How many people were on your team at your last job?

4. What will your previous manager/supervisor say when I ask where you needed to improve?

5. What was your beginning and ending salary at job x?

6. What were your beginning and ending titles at job x?

7. Are you eligible for rehire at job x?

8. What tools are necessary for performing job x?

9. Describe to me how you would perform [x typical job task].

10. What was the focus of your thesis?

11. When did you leave company x?

5. What has disappointed you about a previous job?

Again, this question could get you in trouble so tread carefully. Some good answers might be that your previous job didn't provide any room for growth, that you were laid off due to a mandatory reduction in staff, that they closed their office in your state and required you to relocate, etc. Make sure not to mention anything negative about the people you worked with, the company in general or the job itself.

6. What have you done to improve your knowledge As Rolling Mill Operator in the last year?

Try to include improvement activities that relate to the job As Rolling Mill Operator. A wide variety of activities can be mentioned as positive self-improvement. Have some good ones handy to mention.

7. If you were hiring a person for this job As Rolling Mill Operator, what would you look for?

Discuss qualities you possess required to successfully complete the job duties.

8. Why do you want to leave your current company As Rolling Mill Operator?

Bad Answer: Complaining about or blaming their former job, boss or colleagues. Also, having no good reason.

Good answer: One that focuses on the positives about why the job they're applying for offers them better learning or career opportunities, chances for advancement, aligns more closely to their long term goals, or is a better fit for them.

9. Have you ever you have been in a position As Rolling Mill Operator where you've had to fire someone? How did you feel about that experience?

Be very thoughtful about your answer. This is a very serious matter for most companies and requires a very serious answer. You need to express that you will do it when it is the right thing to do but you don't want to give the impression that you're callus to the process. Don't forget that firing is not the same as laying someone off - it typically is for the direct benefit of the company.

10. Do you have any blind spots?

This question is often meant to trick candidates since acknowledgment of blind spots would indicate they were aware of them. Also, do not disclose bad habits or other personal concerns. Let the interviewer find out about your personal flaws through the course of the interview without directly stating these flaws.

11. What is your dream job?

There is almost no good answer to this question, so don't be specific. If you tell the interviewer that the job you're applying for with his/her company is the perfect job you may loose credibility if you don't sound believable (which you probably won't if you're not telling the truth.) If you give the interviewer some other job the interviewer may get concerned that you'll get dissatisfied with the position if you're hired. Again, don't be specific. A good response could be, “A job where my work ethic and abilities are recognized and I can make a meaningful difference to the organization.”

12. Tell me a difficult situation you have overcome in the workplace?

Conflict resolution, problem solving, communication and coping under pressure are transferable skills desired by many employers As Rolling Mill Operator.
Answering this question right can help you demonstrate all of these traits.
☛ Use real-life examples from your previous roles that you are comfortable explaining
☛ Choose an example that demonstrates the role you played in resolving the situation clearly
☛ Remain professional at all times – you need to demonstrate that you can keep a cool head and know how to communicate with people

13. How do you think you might fit this position As Rolling Mill Operator?

An important part of research before the interview is what the company does and how the job role relates to that. This includes the company philosophy and working methods. Questions such as this seek to find out how a candidate will fit into the organisation As Rolling Mill Operator. Answer positively; including practical examples of how you anticipate you would perform in the new role.

14. How do you measure success?

There may be several good answers. Some include: you're able to set realistic, yet aggressive goals that push you and you're able to achieve them, you go the extra mile on all projects, client satisfaction is high, your boss is elated at your performance on all projects, etc.

15. How do you evaluate success As Rolling Mill Operator?

I evaluate success As Rolling Mill Operator in different ways. At work, it is meeting the goals set by my supervisors and my fellow workers. It is my understanding, from talking to other employees, that the Global Guideline company is recognized for not only rewarding success but giving employees opportunity to grow as well.

16. Are you good at working in a team As Rolling Mill Operator?

Before you answer, consider how you best contribute to a team:

☛ Do you get along easily with people?
☛ Are you an effective collaborator?
☛ Can you communicate with people from various backgrounds and with different personalities?
☛ Can you motivate people?
☛ Do you know how to push back tactfully?
☛ Can you mediate conflicts?
☛ Can you deal with difficult personalities?

17. Are you willing to work overtime or odd hours?

Be completely honest. You don't want to lie to get the job if you're not going to work the hours required.

18. What qualities do you look for in a boss?

Remain optimistic and do not be too specific. Good attributes include moral character, honesty, and intelligence since managers usually believe they possess these qualities.

19. Have you ever been caught stealing, or better yet, have you ever stole anything?

I guess everyone takes a pen or paper or little things like that. But other than that, NO. I have never stole from my employers or better yet As Rolling Mill Operator, from anyone.

20. Tell me about yourself?

There are some questions that your potential employer aren't allowed to ask (but trust me, they probably want to). For instance, they shouldn't really ask about your family or how far away you live from your potential place of employment. If you can find a way to answer these questions anyway (with the answers they want to hear), that will give them a little added info to help them make the (right) decision!

21. How well do you perform under pressure?

This is a fair question, as potential employers want to know if you're going to be able to get the job done even when things get a little bit stressful. You may say that you thrive under pressure or that you're able to get the job done even when things get a little bit stressful, just make sure to provide some real world examples of your ability to work under pressure in a prior job.

22. Basic 15 Interview Questions that Test Communication Skills As Rolling Mill Operator:

For most jobs, communication skills As Rolling Mill Operator are important. It's hard to work as a team if people aren't communicating well.

At some jobs, like customer service or sales, communication skills are an absolute essential.

These questions are meant to help gauge a candidate's ability to communicate.

1. How do you prefer to build rapport with others?

2. How would you go about simplifying a complex issue in order to explain it to a client or colleague?

3. How would you go about persuading someone to see things your way at work?

4. How would you go about explaining a complex idea/problem to a client who was already frustrated?

5. What would you do if you there was a breakdown in communication at work?

6. Talk about a successful presentation you gave and why you think it did well.

7. How would you explain a complicated technical problem to a colleague with less technical understanding?

8. Do you prefer written or verbal communication As Rolling Mill Operator?

9. Describe a time when you had to be careful talking about sensitive information. How did you do it?

10. What would you do if you misunderstood an important communication on the job?

11. Talk about a time when you made a point that you knew your colleagues would be resistant to.

12. Is it more important to be a good listener or a good communicator As Rolling Mill Operator?

13. Tell me about a time you had to relay bad news to a client or colleague.

14. Rate your communication skills on a scale of 1 to 10. Give examples of experiences that demonstrate the rating is accurate.

15. How have you handled working under someone you felt was not good at communicating?

23. Can you describe your ideal boss/supervisor?

During the interview As Rolling Mill Operator process employers will want to find out how you respond to supervision. They want to know whether you have any problems with authority, If you can work well as part of a group (see previous question) and if you take instructions well etc.
Never ever ever, criticize a past supervisor or boss. This is a red flag for airlines and your prospective employer will likely assume you are a difficult employee, unable to work in a team or take intruction and side with your former employer.

24. What can you offer me that another person can't?

This is when you talk about your record of getting things done. Go into specifics from your resume and portfolio; show an employer your value and how you'd be an asset.
You have to say, “I'm the best person for the job As Rolling Mill Operator. I know there are other candidates who could fill this position, but my passion for excellence sets me apart from the pack. I am committed to always producing the best results. For example…”

25. Are you able to relocate if required?

Be completely honest and thoughtful with this one. You don't want to wake up one to find out that you're moving to a new city or state and it may be a major factor in your eligibility for employment. But again, if you don't want to move then the job probably isn't for you.

26. Do you consider yourself successful?

You should always answer yes to this question. Briefly explain why without going on and on. If you communicate that you're more successful than you really are you may come off as arrogant or unrealistic. A goof explanation is that you have set professional goals and that you have met some of these goals and are on track to meet more in the near future.

27. What other companies are you interviewing with?

Companies ask this for a number of reasons, from wanting to see what the competition is for you to sniffing out whether you're serious about the industry. “Often the best approach is to mention that you are exploring a number of other similar options in the company's industry,”. It can be helpful to mention that a common characteristic of all the jobs you are applying to is the opportunity to apply some critical abilities and skills that you possess. For example, you might say 'I am applying for several positions with IT consulting firms where I can analyze client needs and translate them to development teams in order to find solutions to technology problems.'

28. What have you done to reduce costs, increase revenue, or save time?

Even if your only experience is an internship, you have likely created or streamlined a process that has contributed to the earning potential or efficiency of the practice. Choose at least one suitable example and explain how you got the idea, how you implemented the plan, and the benefits to the practice.

29. What challenges are you looking for in this position?

A typical interview question to determine what you are looking for your in next job, and whether you would be a good fit for the position being hired for, is “What challenges are you looking for in a position As Rolling Mill Operator?” The best way to answer questions about the challenges you are seeking is to discuss how you would like to be able to effectively utilize your skills and experience if you were hired for the job. You can also mention that you are motivated by challenges, have the ability to effectively meet challenges, and have the flexibility and skills necessary to handle a challenging job. You can continue by describing specific examples of challenges you have met and goals you have achieved in the past.

30. If you were an animal, which one would you want to be?

Seemingly random personality-test type questions like these come up in interviews generally because hiring managers want to see how you can think on your feet. There's no wrong answer here, but you'll immediately gain bonus points if your answer helps you share your strengths or personality or connect with the hiring manager. Pro tip: Come up with a stalling tactic to buy yourself some thinking time, such as saying, “Now, that is a great question. I think I would have to say… ”

31. How many basketballs would fit in this room?

One. You did not ask what is the maximum number of basketballs you can fit in the room.

32. What are your personal skills which make you a candidate for the position As Rolling Mill Operator?

The list of crucial character traits includes patience, tact, and poise, with personal and cultural sensitivity. One needs the ability to work long hours, with much walking and some physical tasks. But the most important trait of all is to love people and to have the desire to care for them.

33. Are You a ‘People' Person?

Although it may be phrased a little differently, the gist of this question is clear:
Do you like being around people? If you don't, being a medical assistant isn't a good fit for you. After all, you'll be working directly with patients throughout the day. It helps a lot if you sincerely like interacting with them. While answering this question, make sure to mention that you like helping people too. This will drive home the point that you are a talented medical assistant and would be a valuable part of the team As Rolling Mill Operator.

34. What can you tell me about team work as part of the job As Rolling Mill Operator?

There is usually a team of staff nurses working in cooperation with each other. A team of nurses has to get along well and coordinate their actions, usually by dividing their responsibilities into sectors or specific activities. They help each other perform tasks requiring more than one person.

35. Why should I hire you As Rolling Mill Operator?

To close the deal on a job offer, you MUST be prepared with a concise summary of the top reasons to choose you. Even if your interviewer doesn't ask one of these question in so many words, you should have an answer prepared and be looking for ways to communicate your top reasons throughout the interview process.

36. Did you get on well with your last manager?

A dreaded question for many! When answering this question never give a negative answer. “I did not get on with my manager” or “The management did not run the business well” will show you in a negative light and reduce your chance of a job offer. Answer the question positively, emphasizing that you have been looking for a career progression. Start by telling the interviewer what you gained from your last job As Rolling Mill Operator

37. Why are manhole covers round?

This is a classic brainteaser, which was reportedly first asked by a Microsoft interviewer. Here's how to ""solve"" this brainteaser (remember to speak and reason out loud while solving this brainteaser): Why are manhole covers round? Could there be a structural reason? Why aren't manhole covers square? It would make it harder to fit with a cover. You'd have to rotate it exactly the right way.
The pipes below are also round, so fitting them might be easier, as might be making them. So many manhole covers are round because they don't need to be rotated. There are no corners to deal with. Also, a round manhole cover won't fall into a hole because it was rotated the wrong way, so it's safer. Looking at this, it seems corners are a problem. You can't cut yourself on a round manhole cover. And because it's round, it can be more easily transported. One person can roll it.

38. Do you work well on a team? How would you define teamwork?

I would define team work as getting the job done As Rolling Mill Operator whether that means if I have to do more then the guy next to me as long as the work gets finished.

39. If you look at a clock and the time is 3:15, what's the angle between the hour and the minute hands?

Usually, if the answer to a brainteaser seems too easy, chances are the answer's wrong. And in this case, the answer is not zero degrees. The hour hand, remember, moves as well. That is, in addition to the minute hand. And so, at 3:15, the hour hand and the minute hand are not on top of each other. In fact, the hour hand has moved a quarter of the way between the 3 and 4. This means it's moved a quarter of 30 degrees (360 degrees divided by 12 equals 30). So the answer, to be exact, is seven and a half degrees (30 divided by four).

40. What is your greatest strength? How does it help you As Rolling Mill Operator?

One of my greatest strengths, and that I am a diligent worker... I care about the work getting done.. I am always willing to help others in the team.. Being patient helps me not jump to conclusions... Patience helps me stay calm when I have to work under pressure.. Being a diligent worker.. It ensures that the team has the same goals in accomplishing certain things.

41. What do you like to do outside of work?

Interviewers ask personal questions in an interview to “see if candidates will fit in with the culture [and] give them the opportunity to open up and display their personality, too,”. In other words, if someone asks about your hobbies outside of work, it's totally OK to open up and share what really makes you tick. (Do keep it semi-professional, though: Saying you like to have a few beers at the local hot spot on Saturday night is fine. Telling them that Monday is usually a rough day for you because you're always hungover is not.)

42. How do you deal with pressure or stressful situations?

Choose an answer that shows that you can meet a stressful situation head-on in a productive, positive manner and let nothing stop you from accomplishing your goals. A great approach is to talk through your go-to stress-reduction tactics (making the world's greatest to-do list, stopping to take 10 deep breaths), and then share an example of a stressful situation you navigated with ease.

43. Why were you fired?

OK, if you get the admittedly much tougher follow-up question as to why you were let go (and the truth isn't exactly pretty), your best bet is to be honest (the job-seeking world is small, after all). But it doesn't have to be a deal-breaker. Share how you've grown and how you approach your job and life now as a result. If you can position the learning experience as an advantage for this next job, even better.

44. Explain me about a challenge or conflict you've faced at work As Rolling Mill Operator, and how you dealt with it?

In asking this interview question, your interviewer wants to get a sense of how you will respond to conflict. Anyone can seem nice and pleasant in a job interview, but what will happen if you're hired?. Again, you'll want to use the S-T-A-R method, being sure to focus on how you handled the situation professionally and productively, and ideally closing with a happy ending, like how you came to a resolution or compromise.

45. How do you imagine a typical day of an employee in our company As Rolling Mill Operator?

Just do not say that you imagine to only walk and watch what people do. Rather try to show them your attention to details and proactive attitude to job. Mention that you would try to observe the problems, weaknesses as well as opportunities to improve the results and take measures according to it.

46. How would you be an asset to us As Rolling Mill Operator?

Think again about the job specification and the skills needed for this role As Rolling Mill Operator. Have a paragraph prepared highlighting how you will be able to do the job and what you can bring to the team. It goes without saying that this paragraph should be positive.

47. Explain a time when you did not get along with your coworker?

I used to lock heads with a fellows. We disagreed over a lot of things – from the care of civilians to who got what shifts to how to speak with a victim's family. Our personalities just didn't mesh. After three months of arguing, I pulled her aside and asked her to lunch. At lunch, we talked about our differences and why we weren't getting along. It turns out, it was all about communication. We communicated differently and once we knew that, we began to work well together. I really believe that talking a problem through with someone can help solve any issue.

48. What do you consider to be your weaknesses?

What your interviewer is really trying to do with this question-beyond identifying any major red flags-is to gauge your self-awareness and honesty. So, “I can't meet a deadline to save my life As Rolling Mill Operator” is not an option-but neither is “Nothing! I'm perfect!” Strike a balance by thinking of something that you struggle with but that you're working to improve. For example, maybe you've never been strong at public speaking, but you've recently volunteered to run meetings to help you be more comfortable when addressing a crowd.

49. What is it about this position As Rolling Mill Operator that attracts you the most?

Use your knowledge of the job description to demonstrate how you are a suitable match for the role.

50. How many tennis balls can you fit into a limousine? 1,000? 10,000? 100,000? Seriously?

Well, seriously, you might get asked brainteaser questions like these, especially in quantitative jobs. But remember that the interviewer doesn't necessarily want an exact number-he wants to make sure that you understand what's being asked of you, and that you can set into motion a systematic and logical way to respond. So, just take a deep breath, and start thinking through the math. (Yes, it's OK to ask for a pen and paper!)

51. What makes a product successful?

Basing on the monetization, these questions give you the chance to prove your personal try. Do not show extremely your optimism and pursue the unreality. Give your answers the reality.
It is useful to predict a five to ten- year- scenario of expectations in order to gain your targets that you set up and it is the period of time to see how your plans and targets are performed.
Therefore, the quality of the product and marketability of the mentioned industry need to be highlighted. This will help you to achieve the interviewer's attention and insurance to you personality and you can get the honest and long- term goals.

52. Where do you see yourself in five years As Rolling Mill Operator?

If asked this question, be honest and specific about your future goals, but consider this:
A hiring manager wants to know
☛ a) if you've set realistic expectations for your career,
☛ b) if you have ambition (a.k.a., this interview isn't the first time you're considering the question), and
☛ c) if the position aligns with your goals and growth. Your best bet is to think realistically about where this position could take you and answer along those lines. And if the position isn't necessarily a one-way ticket to your aspirations?
It's OK to say that you're not quite sure what the future holds, but that you see this experience playing an important role in helping you make that decision.

53. What was the most important task you ever had?

There are two common answers to this question that do little to impress recruiters:
☛ ‘I got a 2.1'
☛ ‘I passed my driving test'
No matter how proud you are of these achievements, they don't say anything exciting about you. When you're going for a graduate job, having a degree is hardly going to make you stand out from the crowd and neither is having a driving licence, which is a requirement of many jobs.

54. Why should the we hire you as this position As Rolling Mill Operator?

This is the part where you link your skills, experience, education and your personality to the job itself. This is why you need to be utterly familiar with the job description as well as the company culture. Remember though, it's best to back them up with actual examples of say, how you are a good team player.

55. What do you think is your greatest weakness?

Don't say anything that could eliminate you from consideration for the job. For instance, "I'm slow in adapting to change" is not a wise answer, since change is par for the course in most work environments. Avoid calling attention to any weakness that's one of the critical qualities the hiring manager is looking for. And don't try the old "I'm a workaholic," or "I'm a perfectionist.

56. How would your friends describe you?

My friends would probably say that I'm extremely persistent – I've never been afraid to keep going back until I get what I want. When I worked as a program developer, recruiting keynote speakers for a major tech conference, I got one rejection after another – this was just the nature of the job. But I really wanted the big players – so I wouldn't take no for an answer. I kept going back to them every time there was a new company on board, or some new value proposition. Eventually, many of them actually said "yes" – the program turned out to be so great that we doubled our attendees from the year before. A lot of people might have given up after the first rejection, but it's just not in my nature. If I know something is possible, I have to keep trying until I get it.

57. Do you have good computer skills?

It is becoming increasingly important for medical assistants to be knowledgeable about computers. If you are a long-time computer user with experience with different software applications, mention it. It is also a good idea to mention any other computer skills you have, such as a high typing rate, website creation, and more.

58. Why do you want to work As Rolling Mill Operator for this organisation?

Being unfamiliar with the organisation will spoil your chances with 75% of interviewers, according to one survey, so take this chance to show you have done your preparation and know the company inside and out. You will now have the chance to demonstrate that you've done your research, so reply mentioning all the positive things you have found out about the organisation and its sector etc. This means you'll have an enjoyable work environment and stability of employment etc – everything that brings out the best in you.

59. How do you plan to go by an example for your subordinates?

Sticking to the rules by yourself, working hard and not mind participating on basic tasks is a good answer.

60. Have you got any questions?

This is your final opportunity to persuade the interviewer that you are the right candidate for the job. Now is not the time to ask questions about holidays, pay or pensions – all these things can be asked later when you get an offer of employment. Now is the time to ask about any reservations that the interviewer may have about your suitability for the role. You will then give yourself one last chance to persuade the interviewer that you are the right candidate for the job.
Example Thank you. I think we have covered everything. Before we finish the interview I would like to take the opportunity to ask if you have any reservations about my suitability for this role?

61. What do you think we could do better or differently?

This is a common one at startups. Hiring managers want to know that you not only have some background on the company, but that you're able to think critically about it and come to the table with new ideas. So, come with new ideas! What new features would you love to see? How could the company increase conversions? How could customer service be improved? You don't need to have the company's four-year strategy figured out, but do share your thoughts, and more importantly, show how your interests and expertise would lend themselves to the job.

62. Give me an example of an emergency situation that you faced. How did you handle it?

There was a time when one of my employers faced the quitting of a manager in another country. I was asked to go fill in for him while they found a replacement and stay to train that person. I would be at least 30 days. I quickly accepted because I knew that my department couldn't function without me.

63. Do you think you have enough experience As Rolling Mill Operator?

If you do not have the experience they need, you need to show the employer that you have the skills, qualities and knowledge that will make you equal to people with experience but not necessary the skills. It is also good to add how quick you can pick up the routine of a new job role.

64. What kind of salary do you need As Rolling Mill Operator?

This is a loaded question and a nasty little game that you will probably lose if you answer first. So, do not answer it. Instead, say something like, that's a tough question. Can you tell me the range for this position? In most cases, the interviewer, taken off guard, will tell you. If not, say that it can depend on the details of the job. Then give a wide range.

65. What schedule do you hope to work? Are you willing to work extra hours?

Be honest. If you really want the job and are willing to work any schedule needed, say so. If, however, you have no intention of working late hours or weekends, simply let the interviewer know the hours that you are available to work. The same applies to extra hours. You are more likely to be hired if you are willing to work any time you are needed. However, saying that you are willing and then complaining about the hours once you start working is a recipe for disaster.

66. How do you think I rate as an interviewer?

I think you did fine. I'm sure you've conducted a lot of interviews, and it's probably second nature for you now. Thanks for taking the time to meet with me today. I'm sure you have a lot of things you have to juggle every day.
I'd say you rate at least ten out of ten. The questions you asked seemed spot on. I can tell you guys are working hard to find the perfect applicant for the job. I'm glad I could meet with you.

67. What is your desired salary As Rolling Mill Operator?

Bad Answer: Candidates who are unable to answer the question, or give an answer that is far above market. Shows that they have not done research on the market rate, or have unreasonable expectations.

Good answer: A number or range that falls within the market rate and matches their level of mastery of skills required to do the job.

68. How do you handle stressful situations?

By remaining calm, weighing out all my options and executing a plan to get the situation resolve .

69. What do you know about the company?

Any candidate can read and regurgitate the company's “About” page. So, when interviewers ask this, they aren't necessarily trying to gauge whether you understand the mission-they want to know whether you care about it. Start with one line that shows you understand the company's goals, using a couple key words and phrases from the website, but then go on to make it personal. Say, “I'm personally drawn to this mission because…” or “I really believe in this approach because…” and share a personal example or two.

70. How do you keep each member of the team involved and motivated?

Many managers mistakenly think that money is the prime motivator for their employees. However, according to surveys by several different companies, money is consistently ranked five or lower by most employees. So if money is not the best way to motivate your team, what is?

Employees' three most important issues according to employees are:
☛ Respect
☛ A sense of accomplishment
☛ Recognition

71. What is your greatest weakness As Rolling Mill Operator? What are you doing to improve it?

I believe my biggest weakness As Rolling Mill Operator is wanting to help anyone I can help. What I mean is I am willing to take on task that are not my job. I want to learn all I can. However, that has helped me get promoted or even asked to help in times of need in other department. I have been know as the "go to person" when help is needed.

72. How much do you expect to get paid As Rolling Mill Operator?

For this be prepared and research salary to find out what similar positions are paying in your area before you go to the interview. Try to find this information out before giving your salary expectations. You can and should provide a range instead of an exact number. But again, don't say any numbers you're not comfortable with because if the employer offers you a salary at the lowest end of your range, you don't have much to negotiate with when it comes to getting a higher salary.

73. Explain an occasion when you had to adapt in the face of a difficult situation?

One of the most useful interview tactics is to remain positive about your work and achievements. This question lets the candidate draw on their own personal history to show how they have been positive and successful in the face of difficulties. Choose a specific occasion to describe, rather than dealing with generic platitudes.

74. Give an example of a time you successfully worked As Rolling Mill Operator on a team?

On the whole I prefer to stick to doing what I'm told rather than setting myself up to fail by doing things off my own bat. But there was this one time when I suggested to my boss at the pizza parlor that she try offering an ‘all you can eat' deal to students to boost trade on Mondays. She thought it was an interesting idea but nothing ever came of it.

75. What features of your previous jobs have you disliked?

It's easy to talk about what you liked about your job in an interview, but you need to be careful when responding to questions about the downsides of your last position. When you're asked at a job interview about what you didn't like about your previous job, try not to be too negative. You don't want the interviewer to think that you'll speak negatively about this job or the company should you eventually decide to move on after they have hired you.

76. What's your salary history?

When you are interviewing for a new job, it is common practice for the company to ask you about your salary history. I typically want to know what the candidate's base salary is, if they receive any bonus, the average bonus amount, and any additional compensation or perks, such as 500k matching, stock grants or stock options, paid time off and how much they are required to pay towards their medical premiums.

77. How have you changed in the last five years?

All in a nutshell. But I think I've attained a level of personal comfort in many ways and although I will change even more in the next 5-6 years I'm content with the past 6 and what has come of them.

78. Do you have any questions for me?

Good interview questions to ask interviewers at the end of the job interview include questions on the company growth or expansion, questions on personal development and training and questions on company values, staff retention and company achievements.