Rotation of dc shunt motor is revers by using 2
methods,which method is best and why?
Submitted by: Administratorreversing the armature terminal is better & applied in
practice.this is becoz of the following drawbacks in field
reversing method.
* high voltage build-up during reversing the field terminal
which is high enough to puncture the insulation of field
coil.
* high flash-over will occur.
* during reversal, the armature current should be limited
to the rated value,otherwise it will draw twice the time of
starting current.we can insert the external resistance to
limit the current while reversing the armature
terminal.whereas,in field reversal we cannot give any
provision to limit armature over current.
Submitted by: Administrator
practice.this is becoz of the following drawbacks in field
reversing method.
* high voltage build-up during reversing the field terminal
which is high enough to puncture the insulation of field
coil.
* high flash-over will occur.
* during reversal, the armature current should be limited
to the rated value,otherwise it will draw twice the time of
starting current.we can insert the external resistance to
limit the current while reversing the armature
terminal.whereas,in field reversal we cannot give any
provision to limit armature over current.
Submitted by: Administrator
Read Online Aeronautical Engineering Job Interview Questions And Answers
Top Aeronautical Engineering Questions
| ☺ | What is the highest temperature the space shuttle |
| ☺ | How the vfd is working? |
| ☺ | Explain how you overcame a major obstacle? |
| ☺ | Without Air Traffic Control, what is the minimum descent rate can descend the plane? |
| ☺ | Which is the high thrust producing jet engine? |
Top Best Engineering Categories
| ☺ | Mechanical Engineering Interview Questions. |
| ☺ | Civil Engineering Interview Questions. |
| ☺ | Chemical Engineering Interview Questions. |
| ☺ | Electrical Engineering Interview Questions. |
| ☺ | Automobile Engineering Interview Questions. |
